Fix Qt6 resource compilation so LogView icons are embedded at runtime

- QT5_ADD_RESOURCES was a no-op stub under Qt6, silently dropping .qrc files: LogView's :/image/* icons were never compiled into the binary. Map the stub onto qt6_add_resources() (outfiles-variable form, which appends the generated qrc_*.cpp to the source list). LogView is the only caller of the stub. - nglwidgets' Qt6 branch only processed rme_light_style.qrc; nglresources.qrc (which provides :icons/16x16/* toolbar/window icons) was left as a raw file in the source list and never compiled (CMAKE_AUTORCC is off). Process both qrcs. - LogView never loads libnglwidgets.so at runtime (--as-needed drops it: the code uses no nglwidgets symbols), so its :icons/16x16 resources were never registered for the app. Embed the 20 icons LogView actually uses directly into LogViewResources.qrc with explicit aliases (rcc rejects XML comments in .qrc and, without an alias, registers the full relative path as the resource name).
reset Jenkins file
2026-11-03 13:31:02 +01:00 · 2026-10-15 20:43:46 +02:00 · 2026-10-15 20:40:29 +02:00 · 2026-10-15 12:21:52 +02:00 · 2026-10-15 09:00:33 +02:00 · 2026-10-14 20:40:05 +02:00
136 changed files with 672 additions and 4616 deletions
@@ -14,3 +14,4 @@ build/
 build2/
 .envrc
 build4
 coverage-out/
@@ -40,26 +40,9 @@ MESSAGE(STATUS "LTS Version: ${LTS_VERSION_MAJOR}.${LTS_VERSION_MINOR}.${LTS_VER
 # Enable CTest integration for unit tests
 include(CTest)
 # Release scope: subdirectories are added unconditionally (no per-module migration builds)
 function(NGL_ADD_SUBDIR_GUARDED subdir)
  if(MIGRATE_MODULE STREQUAL "")
  add_subdirectory(${subdir})
  else()
    # normalize to forward slashes
    string(REPLACE "\\" "/" _mig "${MIGRATE_MODULE}")
    string(REPLACE "\\" "/" _sub "${subdir}")
    # also compare basenames so MIGRATE_MODULE=Lts/DDS matches subdir 'DDS' when called from Lts
    get_filename_component(_mig_base "${_mig}" NAME)
    get_filename_component(_sub_base "${_sub}" NAME)
    # If MIGRATE_MODULE either starts with the subdir, equals it, contains it as a path component,
    # or the basename matches, include the subdir. This makes nested paths like
    # 'Lts/Proxies/TrainingAreaBase' include both 'Lts' and its child 'Proxies'.
    if(_mig MATCHES "^${_sub}(/|$)" OR _sub MATCHES "^${_mig}(/|$)" OR _mig MATCHES ".*/${_sub}(/|$)" OR _sub MATCHES ".*/${_mig}(/|$)" OR _mig_base STREQUAL _sub OR _sub_base STREQUAL _mig)
      message(STATUS "Including subdir ${subdir} because MIGRATE_MODULE=${MIGRATE_MODULE}")
      add_subdirectory(${subdir})
    else()
      message(STATUS "Skipping subdir ${subdir} because MIGRATE_MODULE=${MIGRATE_MODULE}")
    endif()
  endif()
 endfunction()
 SET(LTS_VERSION_DATE  "01.01.2018" CACHE STRING "The date when this software was compiled")
@@ -95,51 +78,6 @@ if(EXISTS "${CMAKE_SOURCE_DIR}/Lts/Viewer/SituationMap/Symbology")
  include_directories(${CMAKE_SOURCE_DIR}/Lts/Viewer/LtsDataView)
 endif()
 include_directories(${CMAKE_SOURCE_DIR}/Lts/Proxies/TrainingAreaBase)
 # Release scope: exclude Services, DDS, and Plugins include paths
 IF(NOT RELEASE_BUILD)
 include_directories(${CMAKE_BINARY_DIR}/Lts/Services/ProjectDataManagement)
 include_directories(${CMAKE_SOURCE_DIR}/Lts/Services)
 include_directories(${CMAKE_SOURCE_DIR}/include/ProjectDataManagement)
 include_directories(${CMAKE_BINARY_DIR}/Lts/Services/InfrastructureManagement)
 include_directories(${CMAKE_SOURCE_DIR}/include/InfrastructureManagement)
 include_directories(${CMAKE_BINARY_DIR}/Lts/Plugins/InfrastructureManagement/Shared)
 include_directories(${CMAKE_BINARY_DIR}/Lts/Services/AssetManagement)
 include_directories(${CMAKE_SOURCE_DIR}/include/AssetManagement)
 include_directories(${CMAKE_BINARY_DIR}/Lts/Services/AudioVideoManagement)
 include_directories(${CMAKE_SOURCE_DIR}/include/AudioVideoManagement)
 include_directories(${CMAKE_BINARY_DIR}/Lts/Services/ExerciseEventManagement)
 include_directories(${CMAKE_SOURCE_DIR}/include/ExerciseEventManagement)
 include_directories(${CMAKE_BINARY_DIR}/Lts/Services/ExerciseManagement)
 include_directories(${CMAKE_SOURCE_DIR}/include/ExerciseManagement)
 include_directories(${CMAKE_BINARY_DIR}/Lts/Services/FileManagement)
 include_directories(${CMAKE_BINARY_DIR}/Lts/Services/NotificationManagement)
 include_directories(${CMAKE_SOURCE_DIR}/include/NotificationManagement)
 include_directories(${CMAKE_BINARY_DIR}/Lts/Services/ParticipantManagement)
 include_directories(${CMAKE_SOURCE_DIR}/include/ParticipantManagement)
 include_directories(${CMAKE_BINARY_DIR}/Lts/Services/ReportManagement)
 include_directories(${CMAKE_SOURCE_DIR}/include/ReportManagement)
 include_directories(${CMAKE_BINARY_DIR}/Lts/Services/SituationReplay)
 include_directories(${CMAKE_SOURCE_DIR}/include/SituationReplay)
 # Evaluations' generated evl_db_structs.h includes <evl_enums.hpp> by bare name, and that
 # header is consumed from OcBaseDownload as well, so its build dir must be visible tree-wide
 # like the services above. There is no include/Evaluations stub tree, so only the build dir
 # is added (same shape as FileManagement above, which has no stub tree either).
 include_directories(${CMAKE_BINARY_DIR}/Lts/Services/Evaluations)
 include_directories(${CMAKE_SOURCE_DIR}/Lts/Proxies/GuezNasat)
 include_directories(${CMAKE_SOURCE_DIR}/Lts/DDS)
 include_directories(${CMAKE_SOURCE_DIR}/Lts/DDS/QosProfile)
 # Generated DDS headers (BUILD_RTI=ON)
 include_directories(${CMAKE_BINARY_DIR}/Lts)
 # <Core/core.hpp> consumers (LtsCoordinate, AES/CES, HLA proxies) resolve the
 # rtiddsgen-generated core.hpp from the DDS build dir (the qt5 include order);
 # the OFF-era stub copies in include/Core/ have been removed.
 include_directories(${CMAKE_BINARY_DIR}/Lts/DDS)
 include_directories(${CMAKE_BINARY_DIR}/Lts/DDS/DDSConnector)
 include_directories(${CMAKE_BINARY_DIR}/Lts/Services/Messaging)
 include_directories(${CMAKE_SOURCE_DIR}/include/OperatorManagement)
 include_directories(${CMAKE_BINARY_DIR}/Lts/Services/OperatorManagement)
 include_directories(${CMAKE_SOURCE_DIR}/Lts/Plugins)
 ENDIF()
 # Release scope: include path for ProjectDataManagement stub headers
 IF(RELEASE_BUILD)
  include_directories(${CMAKE_SOURCE_DIR}/Lts/Services/ProjectDataManagement/stubs)
@@ -170,78 +108,15 @@ IF(CMAKE_VERSION VERSION_GREATER 3.15.9)
  ENDIF()
 ENDIF()
 # Qt6 Migration: Options to disable modules with missing dependencies (WebEngine, XmlPatterns, ArcGIS)
 # These can be enabled once the required system dependencies are available in the build environment
 OPTION(BUILD_PLUGINS_PLANEDITOR "Build PlanEditor plugin (requires Qt6 WebEngine + ArcGIS SDK)" OFF)
 OPTION(BUILD_PLUGINS_ONLINEHELP "Build OnlineHelp plugin (requires Qt6 WebEngine)" OFF)
 OPTION(BUILD_PLUGINS_SERVICEMONITOR "Build ServiceMonitor plugin (requires Qt6 WebEngine)" OFF)
 OPTION(BUILD_PLUGINS_PARTICIPANT_ORG_CHART "Build ParticipantOrgChart (requires Qt6 WebEngine)" OFF)
 OPTION(BUILD_PLUGINS_MSDL "Build MSDL module (requires Qt6 XmlPatterns)" OFF)
 OPTION(BUILD_PLUGINS_SAAB "Build Saab module (requires Qt6 XmlPatterns)" OFF)
 OPTION(BUILD_RTI "Build RTI Connext DDS dependent modules" OFF)
 OPTION(BUILD_VIEWER_ONLY "Build only Viewer module (no RTI required)" OFF)
 # Add Lts/ include path globally for QosProfile and other Lts headers
 INCLUDE_DIRECTORIES(${CMAKE_CURRENT_SOURCE_DIR}/Lts)
 IF(BUILD_RTI)
  # Define BUILD_RTI as preprocessor macro for all targets
  ADD_COMPILE_DEFINITIONS(BUILD_RTI)
 ENDIF()
 OPTION(BUILD_ARCGIS "Build ArcGIS SDK dependent modules" ON)
 OPTION(BUILD_FILTERMANAGEMENT "Build FilterManagement plugins (temporarily disabled for migration)" OFF)
 OPTION(BUILD_CODIFICATION "Build CodificationManagement plugins (requires KDReports)" OFF)
 OPTION(BUILD_GRANTLEE "Build CodeGen SQL files using KTextTemplate parser (KF6::TextTemplate)" ON)
 # If BUILD_GRANTLEE is OFF but ngl_codegen is needed (for IDL codegen),
 # provide it as an imported executable target from pre-built location
 # Skip this for RELEASE_BUILD since CodeGen is excluded and ngl_codegen is not needed
 IF(NOT BUILD_GRANTLEE AND NOT RELEASE_BUILD)
  # ngl_codegen is copied to build/bin/ by run_final_migration.sh
  # Create an imported target so MacroCodeGenIdl.cmake can find it
  IF(NOT TARGET ngl_codegen)
    ADD_EXECUTABLE(ngl_codegen IMPORTED GLOBAL)
    SET_TARGET_PROPERTIES(ngl_codegen PROPERTIES
      IMPORTED_LOCATION "${CMAKE_BINARY_DIR}/bin/ngl_codegen"
    )
    MESSAGE(STATUS "Using pre-built ngl_codegen from ${CMAKE_BINARY_DIR}/bin/ngl_codegen")
  ENDIF()
 ENDIF()
 OPTION(BUILD_LTSWEBSOCKET "Build LtsWebSocket module (requires NGLLogger)" ON)
 IF(WIN32)
  SET(EXTERNAL_LIBRARY_DIR "C:/Development/Projekte/SituationMap/ExtFw" CACHE STRING "Library dir with all external dependencies")
  LIST(APPEND CMAKE_PREFIX_PATH "${EXTERNAL_LIBRARY_DIR}")
  LIST(APPEND CMAKE_PROGRAM_PATH "${EXTERNAL_LIBRARY_DIR}/bin;${EXTERNAL_LIBRARY_DIR}/dev-utils/bin")
 ELSE()
  # Linux: ArcGIS SDK Pfad konfigurieren (nur wenn BUILD_ARCGIS=ON)
  IF(BUILD_ARCGIS)
    # Use environment variable ARCGIS_ROOT if set, otherwise default to /workspace/external/... (Docker) or host path
    IF(DEFINED ENV{ARCGIS_ROOT})
      SET(ARCGIS_SDK_DIR "$ENV{ARCGIS_ROOT}" CACHE STRING "ArcGIS Runtime SDK for Qt directory")
    ELSEIF(EXISTS "/workspace/external/ArcGIS/MapsSDK_Qt_300.0.0/ArcGIS_Maps_SDK_Qt_300.0.0/qt300.0.0/sdk")
      SET(ARCGIS_SDK_DIR "/workspace/external/ArcGIS/MapsSDK_Qt_300.0.0/ArcGIS_Maps_SDK_Qt_300.0.0/qt300.0.0/sdk" CACHE STRING "ArcGIS Runtime SDK for Qt directory")
    ELSE()
      SET(ARCGIS_SDK_DIR "/repo/external/ArcGIS/MapsSDK_Qt_300.0.0/ArcGIS_Maps_SDK_Qt_300.0.0/qt300.0.0/sdk" CACHE STRING "ArcGIS Runtime SDK for Qt directory")
    ENDIF()
    IF(EXISTS "${ARCGIS_SDK_DIR}")
      LIST(APPEND CMAKE_PREFIX_PATH "${ARCGIS_SDK_DIR}")
      MESSAGE(STATUS "ArcGIS SDK found at: ${ARCGIS_SDK_DIR}")
    ELSE()
      MESSAGE(WARNING "ArcGIS SDK not found at: ${ARCGIS_SDK_DIR}")
    ENDIF()
  ENDIF()
 ENDIF()
 # Set CMAKE_MODULE_PATH early so FIND_PACKAGE can find our custom Find modules
 SET(CMAKE_MODULE_PATH "${CMAKE_SOURCE_DIR}/cmake")
 INCLUDE(FindLibraryWithDebug)
 # Find ArcGIS SDK globally if BUILD_ARCGIS is enabled
 # This creates ArcGIS::ArcGIS target for all modules to use
 IF(BUILD_ARCGIS)
  FIND_PACKAGE(ArcGIS REQUIRED)
 ENDIF()
 ENABLE_TESTING()
 INCLUDE(CTest)
 CONFIGURE_FILE(CTestCustom.ctest ${CMAKE_BINARY_DIR}/CTestCustom.ctest COPYONLY)
@@ -520,17 +395,6 @@ if(NOT TARGET Qt6::WebEngineWidgets)
  message(STATUS "Created stub target for Qt6::WebEngineWidgets (library not available)")
 endif()
 # Stub KDReports::KDReports target if not available (needed by LtsReportDisplay)
 # UNKNOWN (not INTERFACE) so FindKDReports.cmake can upgrade it with a real
 # IMPORTED_LOCATION; an INTERFACE imported target ignores IMPORTED_LOCATION.
 if(NOT TARGET KDReports::KDReports)
  add_library(KDReports::KDReports UNKNOWN IMPORTED)
  set_target_properties(KDReports::KDReports PROPERTIES
    INTERFACE_COMPILE_DEFINITIONS "NO_KDREPORTS"
  )
  message(STATUS "Created stub target for KDReports::KDReports (library not available)")
 endif()
 # Stub Qt6::Core5Compat target if not available (needed by textEditorTest)
 if(NOT TARGET Qt6::Core5Compat)
  add_library(Qt6::Core5Compat INTERFACE IMPORTED)
@@ -622,140 +486,6 @@ endif()
 MESSAGE(STATUS "Qt version is ${Qt6Core_VERSION}, GUI available: ${QT6_GUI_AVAILABLE}")
 #
 # RTI Connext DDS - manuelle Konfiguration da keine CMake Config Files vorhanden
 #
 IF(BUILD_RTI)
  # Support environment variable override, otherwise use relative path from repo root
  IF(DEFINED ENV{DDS_PATH})
    SET(RTI_INSTALL_DIR "$ENV{DDS_PATH}" CACHE PATH "RTI Connext DDS installation directory")
  ELSE()
    # In Docker container: /workspace/external/rti_connext_dds-7.7.0
    # On host: ${CMAKE_SOURCE_DIR}/../../../external/rti_connext_dds-7.7.0
    IF(EXISTS "/workspace/external/rti_connext_dds-7.7.0")
      SET(RTI_INSTALL_DIR "/workspace/external/rti_connext_dds-7.7.0" CACHE PATH "RTI Connext DDS installation directory")
    ELSEIF(EXISTS "${CMAKE_SOURCE_DIR}/../../../external/rti_connext_dds-7.7.0")
      SET(RTI_INSTALL_DIR "${CMAKE_SOURCE_DIR}/../../../external/rti_connext_dds-7.7.0" CACHE PATH "RTI Connext DDS installation directory")
    ELSE()
      SET(RTI_INSTALL_DIR "/opt/RTI" CACHE PATH "RTI Connext DDS installation directory")
    ENDIF()
  ENDIF()
  # Also set RTI_DIR for FindRTI.cmake compatibility (used by subdirectories)
  SET(RTI_DIR "${RTI_INSTALL_DIR}" CACHE PATH "RTI base path" FORCE)
  IF(EXISTS "${RTI_INSTALL_DIR}")
    SET(RTI_LIB_DIR "${RTI_INSTALL_DIR}/lib/x64Linux4gcc8.5.0")
    SET(RTI_INCLUDE_DIR "${RTI_INSTALL_DIR}/include/ndds/hpp")
    # RTI hat vier Include-Pfade:
    # - include/ für ndds/... und andere Top-Level Headers (z.B. ndds/ndds_config_common.h)
    # - include/ndds/ für osapi/... Headers (z.B. osapi/osapi_platform.h)
    # - include/ndds/hpp für C++ Headers (dds/..., rti/...)
    # - include/rti für rti/... Headers
    SET(RTI_INCLUDE_DIRS 
        "${RTI_INSTALL_DIR}/include"
        "${RTI_INSTALL_DIR}/include/ndds"
        "${RTI_INSTALL_DIR}/include/ndds/hpp"
        "${RTI_INSTALL_DIR}/include/rti"
    )
    # RTI Include-Pfade global hinzufügen (auch für Tests die keine RTI Libraries linken)
    INCLUDE_DIRECTORIES(${RTI_INCLUDE_DIRS})
    # RTI Include-Pfade auch an MOC weitergeben (für Q_OBJECT Header mit RTI Types)
    SET(CMAKE_AUTOMOC_INCLUDE_DIRECTORIES ${CMAKE_AUTOMOC_INCLUDE_DIRECTORIES} ${RTI_INCLUDE_DIRS})
    # The generated <svc>_topic_type_plugin.h / <svc>_record_replay_plugin.h
    # headers use Q_INTERFACES(DDSGeneric::TopicTypePlugin), so moc must see
    # the Q_DECLARE_INTERFACE in Lts/DDS/... (resolved through the Lts include
    # root). Without this path every <svc>TopicTypePlugin fails with
    # "Undefined interface" even though the compiler sees the header.
    SET(CMAKE_AUTOMOC_INCLUDE_DIRECTORIES ${CMAKE_AUTOMOC_INCLUDE_DIRECTORIES} ${CMAKE_SOURCE_DIR}/Lts)
    # The ElevationMapManager stub header (include/Viewer/SituationMap/ElevationMap/)
    # lives apart from its source (src/...), so moc needs its directory explicitly.
    # NOTE: this must be set at root scope - subdir-scope appends do not reach
    # the AutogenInfo MOC_INCLUDES.
    SET(CMAKE_AUTOMOC_INCLUDE_DIRECTORIES ${CMAKE_AUTOMOC_INCLUDE_DIRECTORIES} ${CMAKE_SOURCE_DIR}/include/Viewer/SituationMap/ElevationMap)
    # The migrated Projects declare Q_INTERFACES(ProjectPlugin::Plugin) and include
    # <PluginInterfaces/project_plugin_interface.h>. That include dir
    # (Lts/Common/PluginInterfaces/..) is only a target-level PUBLIC include of
    # ProjectPluginInterface and is NOT part of the global include_directories that
    # reach the AutogenInfo MOC_INCLUDES, so moc fails with "Undefined interface".
    # Add the Lts/Common root explicitly (mirrors the Lts append above) so moc can
    # resolve the interface. Must be set at root scope - subdir appends do not
    # reach the AutogenInfo MOC_INCLUDES.
    SET(CMAKE_AUTOMOC_INCLUDE_DIRECTORIES ${CMAKE_AUTOMOC_INCLUDE_DIRECTORIES} ${CMAKE_SOURCE_DIR}/Lts/Common)
    # IMPORTED Targets für RTI Libraries erstellen
    # Debug und Release Varianten korrekt konfigurieren
    FOREACH(lib nddsc nddscore nddscpp nddscpp2 nddsctesthelpers)
      ADD_LIBRARY(RTI::${lib} SHARED IMPORTED)
      # Debug Library
      IF(EXISTS "${RTI_LIB_DIR}/lib${lib}d.so")
        SET_TARGET_PROPERTIES(RTI::${lib} PROPERTIES
          IMPORTED_LOCATION_DEBUG "${RTI_LIB_DIR}/lib${lib}d.so"
        )
      ENDIF()
      # Release Library
      IF(EXISTS "${RTI_LIB_DIR}/lib${lib}.so")
        SET_TARGET_PROPERTIES(RTI::${lib} PROPERTIES
          IMPORTED_LOCATION_RELEASE "${RTI_LIB_DIR}/lib${lib}.so"
          IMPORTED_LOCATION_RELWITHDEBINFO "${RTI_LIB_DIR}/lib${lib}.so"
          IMPORTED_LOCATION_MINSIZEREL "${RTI_LIB_DIR}/lib${lib}.so"
        )
      ENDIF()
      # Include Verzeichnisse für alle Varianten
      # RTI_UNIX required for basic types (RTI_INT32, RTI_UINT32, etc.)
      # RTI_POSIX_THREADS required for pthread support
      SET_TARGET_PROPERTIES(RTI::${lib} PROPERTIES
        INTERFACE_INCLUDE_DIRECTORIES "${RTI_INCLUDE_DIRS}"
        INTERFACE_COMPILE_DEFINITIONS "RTI_LINUX;RTI_UNIX;RTI_POSIX_THREADS"
      )
    ENDFOREACH()
    MESSAGE(STATUS "RTI Connext DDS found at: ${RTI_INSTALL_DIR}")
    MESSAGE(STATUS "RTI Libraries: ${RTI_LIB_DIR}")
    MESSAGE(STATUS "RTI Platform: RTI_LINUX")
  ELSE()
    MESSAGE(WARNING "RTI Connext DDS not found at: ${RTI_INSTALL_DIR}, BUILD_RTI will fail")
  ENDIF()
 ENDIF(BUILD_RTI)
  # Alias Targets für RTI Libraries (für Abwärtskompatibilität)
 # Ermöglicht Verwendung von "ddscore" statt "RTI::nddscore" in CMakeLists.txt Files
 # HINWEIS: ddscore, ddsftc, ddsfts, ddsconnector werden von Lts/DDS Modulen als echte Targets erstellt
 # Daher hier KEINE ALIAS für diese Targets erstellen um Kollisionen zu vermeiden
 IF(BUILD_RTI)
  # BUILD_RTI=ON: Targets werden von Lts/DDS/Core/CMakeLists.txt erstellt - hier keine Stubs!
  # Alias-Typen werden später erstellt, wenn RTI:: Targets verfügbar sind
  IF(TARGET RTI::nddsc)
    ADD_LIBRARY(ddsc ALIAS RTI::nddsc)
    # ddscore wird von Lts/DDS/Core/CMakeLists.txt als echtes Target erstellt - kein Alias hier!
    ADD_LIBRARY(ddscpp2 ALIAS RTI::nddscpp2)
    # Optionale Targets nur als ALIAS erstellen wenn verfügbar (RTI 7.x hat nicht alle Legacy-Bibliotheken)
    IF(TARGET RTI::nddscpp)
      ADD_LIBRARY(ddscpp ALIAS RTI::nddscpp)
    ENDIF()
    IF(TARGET RTI::nddsctesthelpers)
      ADD_LIBRARY(nddsctesthelpers ALIAS RTI::nddsctesthelpers)
    ENDIF()
  ENDIF()
  # HINWEIS: ddsftc, ddsfts, ddsconnector werden von Lts/DDS/FTC Modulen als INTERFACE Targets erstellt
  # Hier KEINE ALIAS erstellen um Target-Kollisionen zu vermeiden
 ELSE()
  # BUILD_RTI=OFF: Leere Interface-Libraries als Platzhalter
  ADD_LIBRARY(ddsc INTERFACE)
  ADD_LIBRARY(ddscore INTERFACE)
  ADD_LIBRARY(ddscpp INTERFACE)
  ADD_LIBRARY(ddscpp2 INTERFACE)
  ADD_LIBRARY(nddsctesthelpers INTERFACE)
  # HINWEIS: ddsftc, ddsfts, ddsconnector werden von Lts/DDS/FTC Modulen als INTERFACE Targets erstellt
  # Hier KEINE Platzhalter erstellen um Target-Kollisionen zu vermeiden
 ENDIF(BUILD_RTI)
 ADD_DEFINITIONS(-DQT_USE_QSTRINGBUILDER)
 ADD_DEFINITIONS(-DQT_NO_CAST_TO_ASCII)
 ADD_DEFINITIONS(-DQT_NO_CAST_FROM_ASCII)
@@ -773,25 +503,12 @@ ENDIF()
 # Ein paar NGL-spezifische Macros
 #
 INCLUDE(NGLMacros)
 # Skip MacroCodeGenIdl for release builds as CodeGen module is excluded
 IF(NOT RELEASE_BUILD)
  INCLUDE(MacroCodeGenIdl)
 ENDIF()
 #
 # Projektspezifische Einstellungen?
 #
 NGL_INSTALL(SV AAR WS FILES lts-cc.conf DESTINATION . RENAME lts-cc.conf.distrib)
 OPTION(ETS_MODE "Build for ETS (No B-Contamination etc)" OFF)
 IF(ETS_MODE)
  ADD_DEFINITIONS(-DETS_MODE)
 ENDIF()
 OPTION(TABLET_MODE "Build for TABLET " OFF)
 IF(TABLET_MODE)
  ADD_DEFINITIONS(-DTABLET_MODE)
 ENDIF()
 OPTION(GUEZ_MODE "Build for GUEZ " ON)
 IF(GUEZ_MODE)
  ADD_DEFINITIONS(-DGUEZ_MODE)
@@ -947,74 +664,12 @@ ELSE()
 ENDIF()
-#
+# Release scope: always build only TetraIF, Z/src, and Lts/Common
-# DDS benoetigt zwingend RTI
+# (TrainingAreaBase is included via Lts/Proxies when Lts is processed)
-#
+NGL_ADD_SUBDIR_GUARDED(TetraIF)
-FIND_PACKAGE(RTI QUIET)
+NGL_ADD_SUBDIR_GUARDED(Z/src)
-if(NOT RTI_FOUND)
+NGL_ADD_SUBDIR_GUARDED(Lts)
  message(WARNING "RTI not found; creating placeholder RTI::* imported targets to allow configure without RTI installation")
  set(_rti_libs nddscore nddsc nddscpp2 rtiroutingservice)
  foreach(_lib ${_rti_libs})
    if(NOT TARGET RTI::${_lib})
      add_library(RTI::${_lib} UNKNOWN IMPORTED)
      set_property(TARGET RTI::${_lib} PROPERTY INTERFACE_INCLUDE_DIRECTORIES "")
    endif()
  endforeach()
 endif()
 # Respect MIGRATE_MODULE: when set to a relative path (e.g. "Lts/Common"), only add
 # the top-level subdirectories required to configure/build that module. This allows
 # per-module migration builds via -DMIGRATE_MODULE=<path>.
 if(NOT DEFINED MIGRATE_MODULE)
  set(MIGRATE_MODULE "" CACHE STRING "If set, only add subdirectories covering this module (path relative to repo root)")
 endif()
 # RELEASE_BUILD: when ON, only build the first release modules (TetraIF, Z, Lts/Common)
 # This excludes Lts/Services, Lts/DDS, Lts/Tools, Lts/Application, Lts/Proxies, Lts/Plugins, Lts/Viewer, Lts/Projects
 if(NOT DEFINED RELEASE_BUILD)
  set(RELEASE_BUILD OFF CACHE BOOL "Build only the first release modules (TetraIF, Z, Lts/Common)")
 endif()
 # For release builds, disable ArcGIS (not in release scope, requires Qt6Location which is not available)
 if(RELEASE_BUILD)
  set(BUILD_ARCGIS OFF CACHE BOOL "Build ArcGIS SDK dependent modules" FORCE)
 endif()
 # Add only guarded subdirectories
 if(RELEASE_BUILD)
  message(STATUS "RELEASE_BUILD=ON: Building only TetraIF, Z/src, and Lts/Common")
  NGL_ADD_SUBDIR_GUARDED(TetraIF)
  NGL_ADD_SUBDIR_GUARDED(Z/src)
  NGL_ADD_SUBDIR_GUARDED(Lts)
 else()
  NGL_ADD_SUBDIR_GUARDED(TetraIF)
  NGL_ADD_SUBDIR_GUARDED(Z/src)
  # Services are included before plugins via Lts/CMakeLists.txt (LTS_SUBDIRS order)
  NGL_ADD_SUBDIR_GUARDED(Lts)
 endif()
  # Add migration tests - skip when MIGRATE_MODULE targets specific Lts modules (tests need full codebase)
  # MUST be after Lts configuration so tests can access Lts targets (LtsTimelineClassic, codegen_base, etc.)
  if(NOT DEFINED MIGRATE_MODULE OR MIGRATE_MODULE STREQUAL "" OR MIGRATE_MODULE STREQUAL "tests")
      ADD_SUBDIRECTORY(tests)
  else()
      message(STATUS "MIGRATE_MODULE=${MIGRATE_MODULE} - skipping tests (need full codebase)")
  endif()
 # TrainingAreaBase is included via Lts/Proxies when Lts is processed
 # Special-case: when migrating TetraIF, also include ProjectDataManagement so generated headers
 # and internal logger target are available in the same build tree for TetraIF dependents.
 if(DEFINED MIGRATE_MODULE AND MIGRATE_MODULE STREQUAL "TetraIF")
  message(STATUS "Including helper modules for TetraIF migration: Lts/Plugins/ProjectDataManagement")
  # Services already included above when BUILD_RTI=ON
  add_subdirectory(Lts/Plugins/ProjectDataManagement)
 endif()
 # at last, to make sure we get all targets in NGL_TS_TARGETS property
 NGL_ADD_SUBDIR_GUARDED(translations)
 #-----------------------------------------------------------------------------------------------------
 OPTION(BUILD_QAV "Build script for local QAV analysis" OFF)
 IF (BUILD_QAV)
  ADD_SUBDIRECTORY(qav)
 ENDIF()
@@ -15,58 +15,21 @@ else()
  message(WARNING "Doxygen config ${CMAKE_SOURCE_DIR}/doxygen/DoxyfileLts.in not found; skipping ADD_DOXYGEN_TARGET(Lts)")
 endif()
-# Add only existing subdirectories to allow partial checkouts / incremental migration
+# Release scope: only build Lts/Common and Lts/Proxies/TrainingAreaBase (tabTelegrams library)
-if(RELEASE_BUILD)
+# Excludes: Tools, Application, DDS, Services, most of Proxies, Plugins, Viewer, Projects
-  # For first release: only build Lts/Common and Lts/Proxies/TrainingAreaBase (tabTelegrams library)
+message(STATUS "Building Lts/Common and Lts/Proxies/TrainingAreaBase")
-  # Excludes: Tools, Application, DDS, Services, most of Proxies, Plugins, Viewer, Projects
+if (EXISTS "${CMAKE_CURRENT_SOURCE_DIR}/Common")
  message(STATUS "RELEASE_BUILD=ON: Building Lts/Common and Lts/Proxies/TrainingAreaBase")
  if (EXISTS "${CMAKE_CURRENT_SOURCE_DIR}/Common")
  NGL_ADD_SUBDIR_GUARDED(Common)
  else()
    message(STATUS "Skipping missing Lts subdirectory: Common")
  endif()
  # TrainingAreaBase provides tabTelegrams library needed by TetraIF/CoPrtCnv
  if (EXISTS "${CMAKE_CURRENT_SOURCE_DIR}/Proxies/TrainingAreaBase")
    NGL_ADD_SUBDIR_GUARDED(Proxies/TrainingAreaBase)
  else()
    message(STATUS "Skipping missing Lts subdirectory: Proxies/TrainingAreaBase")
  endif()
 else()
-  set(LTS_SUBDIRS Tools Application DDS Common Services Proxies Plugins Viewer Projects)
+  message(STATUS "Skipping missing Lts subdirectory: Common")
-  foreach(dir IN LISTS LTS_SUBDIRS)
+endif()
-    if (EXISTS "${CMAKE_CURRENT_SOURCE_DIR}/${dir}")
+# TrainingAreaBase provides tabTelegrams library needed by TetraIF/CoPrtCnv
-    # Use guarded add so top-level MIGRATE_MODULE can restrict which Lts subdirs are included
+if (EXISTS "${CMAKE_CURRENT_SOURCE_DIR}/Proxies/TrainingAreaBase")
-    NGL_ADD_SUBDIR_GUARDED(${dir})
+  NGL_ADD_SUBDIR_GUARDED(Proxies/TrainingAreaBase)
-  else()
+else()
-    message(STATUS "Skipping missing Lts subdirectory: ${dir}")
+  message(STATUS "Skipping missing Lts subdirectory: Proxies/TrainingAreaBase")
  endif()
  endforeach()
 endif()
 IF (BUILD_TESTING)
  if (EXISTS "${CMAKE_CURRENT_SOURCE_DIR}/Tests")
    ADD_SUBDIRECTORY(Tests)
  else()
    message(STATUS "Skipping missing Tests directory under Lts (BUILD_TESTING is ON)")
  endif()
 ENDIF()
 OPTION(BUILD_DOCS "Build documentation as html files from Lts/Documentation" OFF)
 IF (BUILD_DOCS)
  ADD_SUBDIRECTORY(Documentation)
 ENDIF()
 # Ensure codegen macros are available before calling CODEGEN_* helpers
 # Skip for release builds as CodeGen module is excluded and not needed
 IF(NOT RELEASE_BUILD)
  INCLUDE(MacroCodeGenIdl)
 ENDIF()
 # Export headers included by bare name from module sources (release scope)
 INCLUDE_DIRECTORIES(${CMAKE_CURRENT_SOURCE_DIR}/../include/NGLLogger/)
 INCLUDE_DIRECTORIES(${CMAKE_CURRENT_SOURCE_DIR}/../include/LtsUtilsGuiDds/)
 IF(NOT RELEASE_BUILD)
  CODEGEN_WRITE_SERVICEFILE_INFO()
 ENDIF()
@@ -4,59 +4,22 @@
 # $Author$
 #
-# RELEASE_BUILD: exclude modules with DDS/RTI dependencies not needed for TetraIF/Z
+# Core modules needed for TetraIF and Z
-# DDS-dependent modules: CodeGen, LtsAppManager, LtsBotan, LtsCoordinate, LtsElevation,
+ADD_SUBDIRECTORY(CommonUnitTestsPlaceholder)
-# LtsLogin, LtsMultiMonitor, LtsPluginManager, LtsPrinting, LtsProjectionWorkstation,
+ADD_SUBDIRECTORY(httq)
 ADD_SUBDIRECTORY(LtsAppDescriptor)
 ADD_SUBDIRECTORY(LtsCommandLineParser)
 ADD_SUBDIRECTORY(LtsCoordTrans)
 ADD_SUBDIRECTORY(LtsLicence)
 ADD_SUBDIRECTORY(LtsNotification)
 ADD_SUBDIRECTORY(LtsRestClient)
 ADD_SUBDIRECTORY(LtsSerialPortQuerry)
 # Excluded: LtsTimeline (depends on LtsWidgets which has DDS dependencies)
 ADD_SUBDIRECTORY(LtsUtils)
 ADD_SUBDIRECTORY(LtsWebSocket)
 ADD_SUBDIRECTORY(PluginInterfaces)
 ADD_SUBDIRECTORY(ProjectConfig)
 # Excluded: CodeGen, LtsAppManager, LtsBotan, LtsCoordinate, LtsElevation, LtsLogin,
 # LtsMultiMonitor, LtsPluginManager, LtsPrinting, LtsProjectionWorkstation,
 # LtsScriptTimeline, LtsSession, LtsTimelineClassic, LtsVirtualKeyboard, LtsWidgets,
-# PluginInterfaces (TopicReplayInterface, RecordReplayPlugin), TopicEditorBase
+# TopicEditorBase
 if(RELEASE_BUILD)
  # Core modules needed for TetraIF and Z
  ADD_SUBDIRECTORY(CommonUnitTestsPlaceholder)
  ADD_SUBDIRECTORY(httq)
  ADD_SUBDIRECTORY(LtsAppDescriptor)
  ADD_SUBDIRECTORY(LtsCommandLineParser)
  ADD_SUBDIRECTORY(LtsCoordTrans)
  ADD_SUBDIRECTORY(LtsLicence)
  ADD_SUBDIRECTORY(LtsNotification)
  ADD_SUBDIRECTORY(LtsRestClient)
  ADD_SUBDIRECTORY(LtsSerialPortQuerry)
  # Excluded: LtsTimeline (depends on LtsWidgets which has DDS dependencies)
  ADD_SUBDIRECTORY(LtsUtils)
  ADD_SUBDIRECTORY(LtsWebSocket)
  ADD_SUBDIRECTORY(PluginInterfaces)
  ADD_SUBDIRECTORY(ProjectConfig)
  # Excluded: CodeGen, LtsAppManager, LtsBotan, LtsCoordinate, LtsElevation, LtsLogin,
  # LtsMultiMonitor, LtsPluginManager, LtsPrinting, LtsProjectionWorkstation,
  # LtsScriptTimeline, LtsSession, LtsTimelineClassic, LtsVirtualKeyboard, LtsWidgets,
  # TopicEditorBase
 else()
  ADD_SUBDIRECTORY(CodeGen)
  ADD_SUBDIRECTORY(CommonUnitTestsPlaceholder)
  ADD_SUBDIRECTORY(httq)
  ADD_SUBDIRECTORY(LtsAppDescriptor)
  ADD_SUBDIRECTORY(LtsAppManager)
  ADD_SUBDIRECTORY(LtsCommandLineParser)
  ADD_SUBDIRECTORY(LtsCoordinate)
  ADD_SUBDIRECTORY(LtsCoordTrans)
  ADD_SUBDIRECTORY(LtsElevation)
  ADD_SUBDIRECTORY(LtsLicence)
  ADD_SUBDIRECTORY(LtsLogin)
  ADD_SUBDIRECTORY(LtsMultiMonitor)
  ADD_SUBDIRECTORY(LtsNotification)
  ADD_SUBDIRECTORY(LtsPluginManager)
  ADD_SUBDIRECTORY(LtsPrinting)
  ADD_SUBDIRECTORY(LtsProjectionWorkstation)
  ADD_SUBDIRECTORY(LtsRestClient)
  ADD_SUBDIRECTORY(LtsScriptTimeline)
  ADD_SUBDIRECTORY(LtsSerialPortQuerry)
  ADD_SUBDIRECTORY(LtsSession)
  ADD_SUBDIRECTORY(LtsTimeline)
  ADD_SUBDIRECTORY(LtsUtils)
  ADD_SUBDIRECTORY(LtsVirtualKeyboard)
  ADD_SUBDIRECTORY(LtsWebSocket)
  ADD_SUBDIRECTORY(LtsWidgets)
  ADD_SUBDIRECTORY(PluginInterfaces)
  ADD_SUBDIRECTORY(ProjectConfig)
  ADD_SUBDIRECTORY(TopicEditorBase)
 endif()
@@ -1,4 +1,4 @@
-// Stub GTest smoke test for coordTrans
+
 #include <gtest/gtest.h>
 TEST(CoordTransSmokeTest, StubTest)
@@ -1,4 +1,4 @@
-// Stub QtTest smoke test for coordTrans
+
 #include <QTest>
 class CoordTransSmokeTest : public QObject
@@ -1,5 +1,3 @@
 // MockCoordTrans.h - Stub mock for CoordTrans functionality
 // This is a placeholder to allow builds without full CoordTrans implementation
 #ifndef MOCK_COORD_TRANS_H
 #define MOCK_COORD_TRANS_H
@@ -35,8 +35,6 @@ NGL_TARGET_LINK_LIBRARIES(LtsAppDescriptor
 NGL_INSTALL_TARGET(LtsAppDescriptor)
 # LtsAppDescriptorChecker
 SET(LtsAppDescriptorChecker_SRCS
  checker/main.cpp
@@ -51,27 +49,6 @@ NGL_TARGET_LINK_LIBRARIES(LtsAppDescriptorChecker
    Qt6::Core
 )
 # LtsAppDescriptorEditor  =>  Hat niemand benutzt, wird keiner benutzen, also wird der bis auf Weiteres auch nicht an die neue Syntax angepasst.
 #SET(LtsAppDescriptorEditor_SRCS
 #  lts_app_descriptor_editor.cpp
 #  lts_app_descriptor_editor.h
 #)
 #NGL_WRAP_UI(LtsAppDescriptorEditor_SRCS
 #  lts_app_descriptor_editor.ui
 #)
 #NGL_ADD_LIBRARY2(WS NO_TRANSLATION LtsAppDescriptorEditor SHARED ${LtsAppDescriptorEditor_SRCS})
 #NGL_TARGET_INCLUDE_DIRECTORIES(LtsAppDescriptorEditor
 #  PUBLIC
 #    ${CMAKE_CURRENT_SOURCE_DIR}/../
 #)
 if(QT6_GUI_AVAILABLE)
  #NGL_TARGET_LINK_LIBRARIES(LtsAppDescriptorEditor
  #  PUBLIC
@@ -8,7 +8,4 @@
 ADD_SUBDIRECTORY(LtsUtilsCore)
 IF(NOT RELEASE_BUILD)
  ADD_SUBDIRECTORY(LtsUtilsGui)
 ENDIF()
 ADD_SUBDIRECTORY(LtsUtilsSettings)
@@ -48,22 +48,3 @@ NGL_TARGET_LINK_LIBRARIES(LtsUtilsCore
    Qt6::Core
    LtsUtilsCoreHeaderOnly
 )
 #
 # --- Tests --------------------------------------------------------------
 #
 IF(BUILD_RTI AND (BUILD_WS OR BUILD_SV) AND BUILD_TESTING)
  ADD_EXECUTABLE(utils_test
    UnitTests/utils_test.cpp
    UnitTests/utils_test.h
    promise_examples.h
    promise_examples.cpp
  )
  TARGET_LINK_LIBRARIES(utils_test
    LtsUtilsCore
    Qt6::Core
    Qt6::Test
    ddscore
  )
  ADD_TEST(NAME utils_test COMMAND $<TARGET_FILE:utils_test>)
 ENDIF()
@@ -45,9 +45,6 @@ if(QT6_GUI_AVAILABLE)
      Qt6::Svg
  )
 endif()
 IF(BUILD_RTI)
  TARGET_LINK_LIBRARIES(LtsUtilsGuiDds PUBLIC ddscore)
 ENDIF(BUILD_RTI)
 NGL_TARGET_COMPILE_DEFINITIONS(LtsUtilsGuiDds
  PUBLIC
    REQUEST_HELPER_WITH_GUI
@@ -66,6 +63,3 @@ NGL_TARGET_LINK_LIBRARIES(LtsUtilsDds
  PUBLIC
    Qt6::Core
 )
 IF(BUILD_RTI)
  TARGET_LINK_LIBRARIES(LtsUtilsDds PUBLIC ddscore)
 ENDIF(BUILD_RTI)
@@ -14,16 +14,6 @@ ADD_LIBRARY(DataPluginInterface SHARED
 TARGET_INCLUDE_DIRECTORIES(DataPluginInterface PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/..)
 TARGET_LINK_LIBRARIES(DataPluginInterface PUBLIC Qt6::Core)
 # GuiPluginInterface
 IF(NOT RELEASE_BUILD)
 ADD_LIBRARY(GuiPluginInterface SHARED
  ${CMAKE_CURRENT_SOURCE_DIR}/gui_plugin_interface.h
  ${CMAKE_CURRENT_SOURCE_DIR}/gui_plugin_interface.cpp
 )
 TARGET_INCLUDE_DIRECTORIES(GuiPluginInterface PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/..)
 TARGET_LINK_LIBRARIES(GuiPluginInterface PUBLIC Qt6::Core LtsWidgets ProjectConfig LtsAppDescriptor LtsUtilsCore)
 ENDIF()
 # projectPluginInterface
 ADD_LIBRARY(ProjectPluginInterface SHARED
  ${CMAKE_CURRENT_SOURCE_DIR}/project_plugin_interface.h
@@ -39,24 +29,3 @@ ADD_LIBRARY(StylePluginInterface SHARED
 )
 TARGET_INCLUDE_DIRECTORIES(StylePluginInterface PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/..)
 TARGET_LINK_LIBRARIES(StylePluginInterface PUBLIC Qt6::Core)
 # record_replay_plugin (requires RTI DDS)
 if(BUILD_RTI)
  ADD_LIBRARY(RecordReplayPlugin SHARED
    ${CMAKE_CURRENT_SOURCE_DIR}/record_replay_plugin.h
    ${CMAKE_CURRENT_SOURCE_DIR}/record_replay_plugin.cpp
  )
  TARGET_INCLUDE_DIRECTORIES(RecordReplayPlugin PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/..)
  TARGET_LINK_LIBRARIES(RecordReplayPlugin PUBLIC Qt6::Core)
  # Topic Replay Interface (requires RTI DDS and TopicEditorBase)
  ADD_LIBRARY(TopicReplayInterface SHARED
    ${CMAKE_CURRENT_SOURCE_DIR}/topic_replay_interface.h
    ${CMAKE_CURRENT_SOURCE_DIR}/topic_replay_interface.cpp
  )
  TARGET_INCLUDE_DIRECTORIES(TopicReplayInterface PUBLIC 
    ${CMAKE_CURRENT_SOURCE_DIR}/..
    ${CMAKE_BINARY_DIR}/Lts/Common/TopicEditorBase # topiceditorbase_export.h
  )
  TARGET_LINK_LIBRARIES(TopicReplayInterface PUBLIC Qt6::Core TopicEditorBase)
 endif()
@@ -1,14 +1,6 @@
 # Modified CMakeLists.txt from github.com/wille-io/httq
 # Make ${Qt6_WebSockets} optional
 # Link the real WebSockets module whenever the websocket code path is
 # compiled: QT6_WEBSOCKETS_AVAILABLE (root CMakeLists) and the manual
 # Qt6::WebSockets import are set when the real module was found. The old
 # QT6_GUI_AVAILABLE condition never held in this environment (Qt6
 # discovery takes the minimal path) and the Qt6_WebSockets variable was
 # never defined, so AbstractServer.cpp compiled the websocket code
 # without the module on the link line (undefined reference to
 # QWebSocketServer::handleConnection).
 if(QT6_WEBSOCKETS_REAL_FOUND OR Qt6WebSockets_FOUND)
  set(Qt6_WebSockets Qt6::WebSockets)
 else()
@@ -16,9 +16,6 @@ else()
 endif()
 INCLUDE(MacroRTIDDSGen)
 INCLUDE(MacroCodeGenIdl)
 ADD_SUBDIRECTORY(Plugins)
 SET(xml_FILE tab_service.xml)
@@ -36,6 +33,9 @@ SET(SRCS_telegrams
  training_area_telegrams.h
 )
 NGL_ADD_LIBRARY(AAR SV WS HLA tabTelegrams STATIC ${SRCS_telegrams})
 # tabTelegrams is a STATIC lib linked into shared/MODULE targets
 SET_TARGET_PROPERTIES(tabTelegrams PROPERTIES POSITION_INDEPENDENT_CODE ON)
 NGL_TARGET_INCLUDE_DIRECTORIES(tabTelegrams
  PUBLIC
    ${CMAKE_CURRENT_SOURCE_DIR}/..
@@ -70,34 +70,17 @@ SET(SRCS_common
  tab_export.h
 )
-IF(BUILD_RTI)
+# Stub files (no RTI code generation in the release scope)
-  # Generate tab_enums.idl / tab.idl
+LIST(APPEND SRCS_common
  CODEGEN_IDL_SVC(SRCS_common ${xml_FILE})
  # Generate tab_db_impl.cpp/.h, tab_db.h
  CODEGEN_DATABASE(SRCS_common ${xml_FILE})
  # Generate *.cpp/*.hpp from idl (only with BUILD_RTI)
  RTIDDSGEN(SRCS_common tab_enums.idl)
  # tab.idl includes pdm.idl, so add explicit dependency on pdm.idl generation
  RTIDDSGEN(SRCS_common tab.idl DEPENDS ${CMAKE_BINARY_DIR}/Lts/Services/ProjectDataManagement/pdm.idl)
  # Generate tab_dt[s,c]_types.h, tab_ft[s,c]_types.h
  CODEGEN_TOPIC_TYPEDEFS(SRCS_common ${xml_FILE})
  # generate tab_[d|f]tc.h
  CODEGEN_CLIENT_TOPICS_IFC(SRCS_common ${xml_FILE})
 ELSE()
  # Stub files for BUILD_RTI=OFF - NO code generation
  LIST(APPEND SRCS_common
  stubs/tab_enums_stub.hpp
  stubs/tab_stub.hpp
  stubs/tab_db_stub.hpp
  stubs/tab_topic_type_plugin_stub.cpp
-  )
+)
 ENDIF()
 # Create target only if component flags allow
 NGL_ADD_LIBRARY2(AAR SV WS HLA svcTabCommon SHARED  ${SRCS_common})
 # Generate export header ALWAYS (needed for logger.h even if target not built)
 # Use custom command to create minimal export header if target wasn't created
 IF(NOT TARGET svcTabCommon)
  # Create a dummy static library just for export header generation
  ADD_LIBRARY(svcTabCommon STATIC ${SRCS_common})
@@ -121,220 +104,8 @@ NGL_TARGET_LINK_LIBRARIES(svcTabCommon
    $<IF:$<TARGET_EXISTS:svcPdmCommon>,svcPdmCommon,>
    LtsUtilsCoreHeaderOnly
 )
 IF(BUILD_RTI)
 NGL_TARGET_LINK_LIBRARIES(svcTabCommon
  PRIVATE
    RTI::nddscpp2
  PUBLIC
    ddscore
 )
 ENDIF(BUILD_RTI)
 NGL_INSTALL_TARGET(svcTabCommon)
 #
 # --- Library svcTabClient --------------------------------------------------------------------------------
 #
 # Skip for release builds - DDS-dependent service library
 IF(NOT RELEASE_BUILD)
 SET(SRCS_client
  tab_export.h
 )
 IF(BUILD_RTI)
  # generate tab_[d|f]tc_impl.[cpp|h]
  CODEGEN_CLIENT_TOPICS_IMPL(SRCS_client ${xml_FILE})
 ENDIF()
 NGL_ADD_LIBRARY2(AAR SV WS HLA svcTabClient SHARED ${SRCS_client})
 # NGL_ADD_LIBRARY2 (unlike NGL_ADD_LIBRARY) does not define the
 # MAKE_<SYMBOL>_LIB compile guard, but the generated tab_[d|f]tc_impl.h
 # headers require MAKE_SVCTABCLIENT_LIB — same situation as
 # svcCoreClient/ddscore, which define their guards explicitly.
 TARGET_COMPILE_DEFINITIONS(svcTabClient PRIVATE MAKE_SVCTABCLIENT_LIB)
 NGL_TARGET_INCLUDE_DIRECTORIES(svcTabClient
  PUBLIC
    ${CMAKE_CURRENT_SOURCE_DIR}/../
    ${CMAKE_CURRENT_BINARY_DIR}/../
 )
 IF(BUILD_RTI)
 NGL_TARGET_LINK_LIBRARIES(svcTabClient
  PRIVATE
    RTI::nddscpp2
    ddsconnector
  PUBLIC
    svcTabCommon
    ddsftc
 )
 ENDIF(BUILD_RTI)
 NGL_INSTALL_TARGET(svcTabClient)
 ENDIF() # NOT RELEASE_BUILD
 #
 # --- Library svcTabServer --------------------------------------------------------------------------------
 #
 # Skip for release builds - DDS-dependent service library
 IF(NOT RELEASE_BUILD)
 SET(SRCS_server
  tx_mixin.cpp
  tx_mixin.h
 )
 IF(BUILD_RTI)
  # generate tab_[d|f]ts.h, tab_[d|f]ts_impl.[cpp|h]
  CODEGEN_SERVER_TOPICS(SRCS_server ${xml_FILE})
 ENDIF()
 NGL_ADD_LIBRARY2(AAR HLA SV svcTabServer SHARED ${SRCS_server}) # NGL_ADD_LIBRARY2 won't work here - no time for investigations
 # Generated tab_[d|f]ts_impl.h require MAKE_SVCTABSERVER_LIB (see svcTabClient above).
 TARGET_COMPILE_DEFINITIONS(svcTabServer PRIVATE MAKE_SVCTABSERVER_LIB)
 if(BUILD_SV OR  BUILD_HLA)
  GENERATE_EXPORT_HEADER(svcTabServer) # FIXME: quick workaround
 endif()
 NGL_TARGET_INCLUDE_DIRECTORIES(svcTabServer
  PUBLIC
    ${CMAKE_CURRENT_SOURCE_DIR}/../
    ${CMAKE_CURRENT_BINARY_DIR}/../
 )
 NGL_TARGET_LINK_LIBRARIES(svcTabServer
  PUBLIC
    svcTabCommon
    ngldb
    ${_QT_CORE_TARGET}
    $<IF:$<AND:$<BOOL:${QT6_GUI_AVAILABLE}>,$<TARGET_EXISTS:Qt6::Gui>>,Qt6::Gui,>
    ${_QT_NETWORK_TARGET}
 )
 IF(BUILD_RTI)
  NGL_TARGET_LINK_LIBRARIES(svcTabServer
    PRIVATE
      RTI::nddscpp2
      ddsconnector
      ddsfts
  )
 ENDIF(BUILD_RTI)
 NGL_INSTALL_TARGET(svcTabServer)
 ENDIF() # NOT RELEASE_BUILD
 #
 # --- Topic Type Plugin --------------------------------------------------------------
 #
 IF(BUILD_RTI)
 CREATE_TOPIC_TYPE_PLUGIN(${xml_FILE})
 ENDIF()
 #
 # --- RecordReplayPlugin --------------------------------------------------------------
 #
 IF(BUILD_RTI)
 CREATE_RECORD_REPLAY_PLUGIN_SHARED(${xml_FILE})
 IF (TARGET tabRecordReplayPlugin)
  TARGET_SOURCES(tabRecordReplayPlugin
    PRIVATE
      tab_record_replay_plugin_custom.cpp
      tab_record_replay_plugin_custom.h
  )
 ENDIF()
 ENDIF()
 #
 # --- Executable svcTrainingAreaBase (sTAB) -------------------------------------------------
 #
 # Skip for release builds - DDS-dependent executable
 IF(NOT RELEASE_BUILD)
 SET(SRCS_exe
  dds_handler.cpp
  dds_handler.h
  exm_handler.cpp
  exm_handler.h
  ism_handler.cpp
  ism_handler.h
  main.cpp
  main_handler.cpp
  main_handler.h
  pdm_handler.cpp
  pdm_handler.h
  ppm_handler.cpp
  ppm_handler.h
  position_handler.cpp
  position_handler.h
  recv_from_dds_aes.cpp
  recv_from_dds_aes.h
  recv_from_dds_fts.cpp
  recv_from_dds_fts.h
  recv_from_tab.h
  send_to_dds.cpp
  send_to_dds.h
  send_to_tab.h
  settings.cpp
  settings.h
  tab_export.h
  tab_plugin_interface.h
  WebSocketInterface/data_manager.cpp
  WebSocketInterface/data_manager.h
  WebSocketInterface/json_keys.h
  WebSocketInterface/websocket_interface_handler.cpp
  WebSocketInterface/websocket_interface_handler.h
  WebSocketInterface/Messages/client_message.cpp
  WebSocketInterface/Messages/client_message.h
  WebSocketInterface/Messages/reply_message.cpp
  WebSocketInterface/Messages/reply_message.h
 #  tx_mixin.cpp
 #  tx_mixin.h
  log4cxx_tab.props
  ${xml_FILE}
 )
 IF(BUILD_RTI)
  # Generate tab.sql, tab.xml
  CODEGEN_SQL(SRCS_exe ${xml_FILE})
 ENDIF()
 NGL_ADD_SVC_ICON(SRCS_exe)
 NGL_ADD_EXECUTABLE(AAR SV svcTrainingAreaBase ${SRCS_exe})
 NGL_TARGET_LINK_LIBRARIES(svcTrainingAreaBase
  Qt6::Core
  Qt6::Network
  LtsCoordTrans
  LtsWebSocketServer
  LtsCommandLineParser
  LtsPluginLoader
  LtsUtilsCoreHeaderOnly
  LtsUtilsCore
  svcTabCommon
  svcTabServer
  # main_handler.cpp includes the generated <TrainingAreaBase/tab_record_replay_plugin.h>
  # and directly instantiates TrainingAreaBase::RecordReplayPluginCustom (whose methods
  # live in the plugin .so). Linking the plugin target (rather than relying on a full
  # `make all` having generated the header first) makes this a proper build dependency:
  # the plugin's codegen runs before the exe compiles (so the generated header exists),
  # the plugin's PUBLIC build-tree include dir is inherited (so the include resolves),
  # and the plugin .so is linked (so the RecordReplayPluginCustom symbols resolve).
  $<IF:$<TARGET_EXISTS:tabRecordReplayPlugin>,tabRecordReplayPlugin,>
  svcNomClient
  svcAesClient
  svcOpmClient
  svcCoreClient
  svcAsmClient
  svcExmClient
  $<IF:$<TARGET_EXISTS:svcIsmClient>,svcIsmClient,>
  svcPdmClient
  svcPpmClient
  $<IF:$<TARGET_EXISTS:ddsconnector>,ddsconnector,>
  nglsettings
  ProjectConfig
  NGLLogger
  nglcoreapplication
  ngltools
  tabTelegrams
 )
 NGL_INSTALL_TARGET(svcTrainingAreaBase)
 NGL_INSTALL(AAR SV FILES log4cxx_tab.props DESTINATION bin)
 NGL_ADD_TARGET_LINK(svcTrainingAreaBase sTAB)
 ENDIF() # NOT RELEASE_BUILD
 # clientPluginInterface
 ADD_LIBRARY(tabPluginInterface INTERFACE)
 TARGET_SOURCES(tabPluginInterface INTERFACE
@@ -4,43 +4,5 @@
 # $Author$
 #
-IF (NOT BUILD_RPM AND NOT RELEASE_BUILD)
+# Release scope: only the TetraJson plugin is in the tree (GUEZ project, no RTI)
-  ADD_SUBDIRECTORY(DebugJsonDir)
+ADD_SUBDIRECTORY(TetraJson)
 ENDIF()
 #ADD_SUBDIRECTORY(Spu)
 IF (BUILD_WLS AND NOT RELEASE_BUILD)
    ADD_SUBDIRECTORY(WlsTetra)
 ELSE()
   ADD_SUBDIRECTORY(TetraJson)
 ENDIF()
 IF ("${_pname}" STREQUAL "commaster")
   ADD_SUBDIRECTORY(Nmea)
 ENDIF()
 IF (BUILD_SV AND DEFINED _pname)
  IF ("${_pname}" STREQUAL "guez")
     IF(NOT RELEASE_BUILD)
     ADD_SUBDIRECTORY(HlaJson)
     ENDIF()
  ENDIF()
 ENDIF()
 IF (BUILD_SVC_HLA)
  IF ("${_pname}" STREQUAL "ahtc")
     ADD_SUBDIRECTORY(ApacheHlaJson)
  ENDIF()
 ENDIF()
 # AdlerJson depends on svcPdmClient (ProjectDataManagement) which is not in release scope
 IF(NOT RELEASE_BUILD)
 ADD_SUBDIRECTORY(AdlerJson)
 ENDIF()
 OPTION(BUILD_UAS_PROXY "Build the UAS TAB Plugin (default: OFF) [needs BUILD_SV = ON and UNIX-like OS]" OFF) # TODO: use 'pname = guez' if done
 if (BUILD_SV AND BUILD_UAS_PROXY AND NOT WIN32 AND NOT RELEASE_BUILD)
  add_subdirectory(UAS)
 endif()
@@ -1,5 +1,3 @@
 // Stub file for tab_db - BUILD_RTI=OFF
 // Auto-generated stub to replace RTI IDL-generated database code
 #ifndef TAB_DB_STUB_HPP
 #define TAB_DB_STUB_HPP
@@ -1,5 +1,3 @@
 // Stub file for tab_enums - BUILD_RTI=OFF
 // Auto-generated stub to replace RTI IDL-generated enums
 #ifndef TAB_ENUMS_STUB_HPP
 #define TAB_ENUMS_STUB_HPP
@@ -1,6 +1,3 @@
 // Stub file for tab types - BUILD_RTI=OFF
 // Auto-generated stub to replace RTI IDL-generated types
 #ifndef TAB_STUB_HPP
 #define TAB_STUB_HPP
@@ -1,6 +1,3 @@
 // Stub file for tab_topic_type_plugin - BUILD_RTI=OFF
 // Auto-generated stub to replace RTI IDL-generated plugin code
 #include "tab_enums_stub.hpp"
 namespace tab
@@ -1,5 +1,3 @@
 // Stub file for pdm - BUILD_RTI=OFF
 // Auto-generated stub to replace RTI IDL-generated code
 #ifndef PDM_HPP
 #define PDM_HPP
@@ -10,9 +8,6 @@
 #include <QString>
 #include <QStringList>
 // Forward declarations and stub types for ProjectDataManagement namespace
 // Used when BUILD_RTI=OFF to allow compilation without RTI Connext DDS
 namespace ProjectDataManagement
 {
@@ -1,6 +1,3 @@
 // Stub file for pdm_db - BUILD_RTI=OFF
 // Auto-generated stub to replace RTI IDL-generated database code
 #ifndef PDM_DB_STUB_HPP
 #define PDM_DB_STUB_HPP
@@ -1,5 +1,3 @@
 // Stub file for pdm_enums - BUILD_RTI=OFF
 // Auto-generated stub to replace RTI IDL-generated code
 #ifndef PDM_ENUMS_STUB_HPP
 #define PDM_ENUMS_STUB_HPP
@@ -1,5 +1,3 @@
 // Stub file for pdm - BUILD_RTI=OFF
 // Auto-generated stub to replace RTI IDL-generated code
 #ifndef PDM_STUB_HPP
 #define PDM_STUB_HPP
@@ -1,30 +1,31 @@
-# qt6-migrated-legatus — compile and run (step by step)
+# qt6-migrated-legatus — build and run, step by step
 Build guide for the Qt6-migrated legatus tree on the release
 **validation-scope** branch. Everything runs inside a prebuilt Docker
 image; the host only needs Docker.
-## Scope and layout
+## Scope
-The release scope built by `new_docker_build.sh` is:
+What `new_docker_build.sh` builds and packages:
 | Area | Contents |
 |---|---|
-| `TetraIF/` | `CoPrtCnv`, `LogView`, `PrtCnv` (+ `unit-test/` — see below) |
+| `TetraIF/` | `CoPrtCnv`, `LogView`, `PrtCnv` (+ `unit-test/` — see Step 3) |
 | `Z/src/` | NGL application/core library stack (NGLLogger, nglcoreapplication, …) |
-| `Lts/Common/` | LTS common libraries (LtsCoordTrans, LtsLicence, …) |
+| `Lts/Common/` | LTS common libraries (LtsCoordTrans, LtsLicence, LtsUtils, …) |
-| `Lts/Proxies/TrainingAreaBase` | built as a dependency of TetraIF |
+| `Lts/Proxies/TrainingAreaBase` | `tabTelegrams` library, built as a TetraIF dependency |
-Useful entries at the tree root:
+Entries at the tree root:
- `new_docker_build.sh` — the build driver (image build, compile, ctest, DEB packaging)
+- `new_docker_build.sh` — build driver (image build, compile, ctest, DEB packaging)
 - `Dockerfile` — recipe of the prebuilt build image (Ubuntu 26.04 + Qt 6.10.2 + deps)
 - `rpmbuild/make_rpm_ubuntu26.py` — in-tree DEB package producer (self-contained)
 - `jenkins-ci-rme/` — in-tree copy of the Jenkins CI flow (see its own `README.md`)
 - `build4/` — build tree, created by the driver (git-ignored scratch area)
 Toolchain inside the image: **Ubuntu 26.04, GCC 15.2.0, Qt 6.10.2**
-(`/opt/Qt/6.10.2/gcc_64`), C++17, Release build.
+(`/opt/Qt/6.10.2/gcc_64`), C++17, Release build. No license file is
 required.
 ## Prerequisites
@@ -35,14 +36,12 @@ Toolchain inside the image: **Ubuntu 26.04, GCC 15.2.0, Qt 6.10.2**
   `new_docker_build.sh` invokes Docker, so running the driver as-is
   satisfies this.
-No license file is required: this branch builds the release scope only
+The driver resolves the pipeline root from its own location (override
-(TetraIF, Z/src, Lts/Common) with `BUILD_RTI=OFF`, so the RTI Connext
+with the exported `MIGRATE_PIPELINE_ROOT` or the `.envrc` in this
-DDS modules (the only consumers of an RTI license) are not compiled.
+directory).
 `new_docker_build.sh` resolves the pipeline root from its own location
 (override with the exported `MIGRATE_PIPELINE_ROOT` or the `.envrc` in
 this directory).
-All commands below are run **from this directory** (`qt6-migrated-legatus/`).
+All commands below are run **from this directory**
 (`qt6-migrated-legatus/`).
 ## Step 1 — Build the prebuilt Docker image (once)
@@ -70,22 +69,21 @@ To remove it later:
 What the driver does inside the container:
 1. `rm -rf build4 && mkdir build4 && cd build4` (fresh build tree)
-2. Configure with CMake — the mandatory flags:
+2. Configure with CMake:
   ```bash
   cmake .. \
     -DBUILD_TESTING=ON \
     -DBUILD_ARCGIS=OFF \
     -DRELEASE_BUILD=ON \
     -DCMAKE_CXX_STANDARD=17 \
     -DCMAKE_BUILD_TYPE=Release \
     -DCMAKE_PREFIX_PATH=/opt/Qt/6.10.2/gcc_64:/usr/local
   ```
-   (`BUILD_ARCGIS` and `RELEASE_BUILD` override CMake defaults that do
+   (`RELEASE_BUILD=ON` selects the release scope; everything else is at
-   not match this branch.)
+   its CMake default.)
 3. `make -j8` the release-scope targets (TetraIF modules, Z stack,
-   Lts/Common libs, all test executables — the list is
+   Lts/Common libraries, all test executables — the list is
   `RELEASE_BUILD_TARGETS` in `new_docker_build.sh`).
 4. Run **ctest** (see Step 3).
@@ -97,28 +95,47 @@ Output to inspect after the run:
 - `build4/lib/` — shared libraries
 To rebuild incrementally without a fresh tree, run `make` directly in an
-interactive container (Step 4).
+interactive container against the existing `build4/`:
 ```bash
 docker run --rm -it -v /path/to/pipeline-root:/workspace legatus-qt6:1.0 \
  bash -c 'cd /workspace/qt-migration-legatus/qt6-after/qt6-migrated-legatus/build4 \
  && make -j8'
 ```
 ## Run an executable directly
 To run a built executable interactively — e.g. the GUI apps under
 `build4/bin/` (`LogView`, `PrtCnv`) against your local display — start a
 shell inside the container with X11 forwarding:
 ```bash
 docker run --rm -it \
  -e DISPLAY \
  -e LC_ALL=C.UTF-8 \
  -v /tmp/.X11-unix:/tmp/.X11-unix \
  -v /path/to/pipeline-root:/workspace \
  legatus-qt6:1.0 \
  bash -c 'cd /workspace/qt-migration-legatus/qt6-after/qt6-migrated-legatus/build4 && exec bash'
 ```
 ## Step 3 — Run the tests
 ### 3.1 ctest (automatic)
 `new_docker_build.sh` already runs `ctest --test-dir build4
--output-on-failure` after the compile. Expected baseline (8 tests):
+--output-on-failure` after the compile. Expected baseline (7 tests, all
 passed):
 | # | Test | Result |
 |---|---|---|
 | 1 | `coprtcnv_unit_test` | Passed |
 | 2 | `logview_unit_test` | Passed |
 | 3 | `prtcnv_unit_test` | Passed |
-| 4 | `nglcomp_test` | **Not Run** (pre-existing: compression "Unknown error" in Qt6) |
+| 4 | `NGLToolsQtSmoke` | Passed |
-| 5 | `NGLToolsQtSmoke` | Passed |
+| 5 | `test_nglpdfwidget` | Passed |
-| 6 | `test_nglpdfwidget` | Passed |
+| 6 | `lts_coord_trans_unit_test` | Passed |
-| 7 | `lts_coord_trans_unit_test` | Passed |
+| 7 | `aes_crypt_test` | Passed |
 | 8 | `aes_crypt_test` | Passed |
 `nglcomp_test` being *Not Run* is the expected baseline — the pipeline
 logs a ctest failure for it but continues.
 ### 3.2 Build the unit tests only
@@ -149,7 +166,7 @@ ctest --output-on-failure'
 Each QtTest binary accepts a single slot name to run just one test,
 e.g. `./bin/coprtcnv_unit_test radioTelegramFragmentationRoundtrip`.
-### 3.4 TetraIF unit tests (this tree, `TetraIF/unit-test/`)
+### 3.4 TetraIF unit tests (`TetraIF/unit-test/`)
 | Test | Module covered | Note |
 |---|---|---|
@@ -186,7 +203,7 @@ DEBs in `${WORKSPACE}/rpms/${PROJECT}/${OS_VERSION}/`:
 | `qt6-release-sources_*` | release-scope sources |
 | `qt6-release-ctest-runtime_*` | test executables under `/usr/lib/ctest/` (incl. the TetraIF unit tests) |
 | `qt6-release-ctest-sources_*` | test sources (files with "test" in the name under the release dirs, incl. `TetraIF/unit-test/*.cpp`) |
-| `qt6-release-build-pipeline_*` | the in-tree pipeline files (`new_docker_build.sh`, `Dockerfile`, `rpmbuild/`, `jenkins-ci-rme/`) under `/usr/src/pipeline/` |
+| `qt6-release-build-pipeline_*` | the in-tree pipeline files (`new_docker_build.sh`, `Dockerfile`, `CMakeLists.txt`, `rpmbuild/`, `jenkins-ci-rme/`) under `/usr/src/pipeline/` |
 Verify a package:
@@ -211,6 +228,45 @@ jenkins-ci-rme/release-16-10-2026.sh
 See `jenkins-ci-rme/README.md` for the pipeline details.
 ## Step 6 — Code coverage (lcov)
 ```bash
 export WORKSPACE=/path/to/pipeline-root   # e.g. ~/release/qt6-migration-pipeline
 export PROJECT=guez
 export OS_VERSION=26.04
 ./new_docker_build.sh --docker-image legatus-qt6:1.0 \
  --run-coverage \
  --coverage-output-dir "${WORKSPACE}/coverage/${PROJECT}/${OS_VERSION}/" \
  > /path/to/coverage.log 2>&1
 ```
 (export the variables *before* the command — command-prefix variables are
 not expanded in the same command's arguments.)
 The driver builds the release scope with `-O0 --coverage`, runs the same ctest
 suite, then captures the data with lcov: the report covers the release scope
 (`TetraIF`, `Z/src`, `Lts/Common`, `Lts/Proxies/TrainingAreaBase`), and test
 sources are filtered out of the report, so the percentages reflect the module
 code.
 Artifacts in the coverage output directory:
 | File | Contents |
 |---|---|
 | `html/index.html` | browsable report (line + branch coverage per file) |
 | `coverage.info` | machine-readable lcov tracefile |
 | `coverage_summary.txt` | whole-scope totals |
 `--run-coverage` is mutually exclusive with `--run-jenkins-builder` (different
 instrumentation of the same build tree).
 The Jenkins pipeline runs the same step on every build (`RunCoverage`
 parameter, on by default) and archives the report as build artifacts under
 `coverage/<project>/<os>/`; the local dry run
 (`jenkins-ci-rme/release-16-10-2026.sh`) does the same, with
 `DRYRUN_COVERAGE=OFF` to skip coverage there.
 ## Options reference
 `./new_docker_build.sh --help` prints the full option list. The main
@@ -218,23 +274,24 @@ ones:
 | Option | Default | Purpose |
 |---|---|---|
-| `--docker-image IMAGE` | `legatus-qt6-prebuilt:latest` | image to use/build/delete |
+| `--docker-image IMAGE` | `legatus-qt6:1.0` | image to use/build/delete |
 | `--build-prebuilt-image` | — | build the image from `./Dockerfile` and exit |
 | `--delete-prebuilt-image` | — | delete the image and exit |
 | `--run-jenkins-builder` | off | produce the DEB packages (Step 4) |
 | `--package-output-dir DIR` | `./packages-out` | where the DEBs are written |
 | `--lts-version / --project / --build-number / --build-tag` | `1.0` / `guez` / `1` / `manual-build` | package metadata |
 | `--run-coverage` | off | coverage build + lcov report (Step 6) |
 | `--coverage-output-dir DIR` | `./coverage-out` | where the coverage report is written |
 Environment overrides: `DOCKER_IMAGE`, `RUN_JENKINS_BUILDER`,
-`PACKAGE_OUTPUT_DIR`, `PROJECT`, `LTS_VERSION`, `GUEZ_MODE`,
+`PACKAGE_OUTPUT_DIR`, `RUN_COVERAGE`, `COVERAGE_OUTPUT_DIR`, `PROJECT`,
-`BUILD_NUMBER`, `BUILD_TAG`, `MIGRATE_PIPELINE_ROOT`.
+`LTS_VERSION`, `GUEZ_MODE`, `BUILD_NUMBER`, `BUILD_TAG`,
 `MIGRATE_PIPELINE_ROOT`.
 ## Troubleshooting
 - **"no Qt platform plugin could be initialized"** when running a test
  binary by hand → `export QT_QPA_PLATFORM=offscreen`.
 - **ctest fails with `nglcomp_test (Not Run)`** → expected baseline
  (pre-existing Qt6 compression issue); the pipeline continues.
 - **Stale build tree** → the driver always recreates `build4/`; for
  manual builds delete `build4/` and rerun Step 2 if CMake behaves oddly.
 - **DEBs not on the host** → the output dir must be a path that exists
@@ -14,6 +14,8 @@ NGL_TARGET_LINK_LIBRARIES(LogViewLogger
  NGLLogger
 )
 SET_TARGET_PROPERTIES(LogViewLogger PROPERTIES POSITION_INDEPENDENT_CODE ON)
 SET(my_SRCS
  IntegerCalculator.cpp
  IntegerCalculator.hpp
@@ -15,4 +15,26 @@
        <file>image/ShowSend.png</file>
        <file>image/Wls.png</file>
    </qresource>
    <qresource prefix="/icons/16x16">
        <file alias="configure.png">../../Z/src/nglwidgets/icons/16x16/configure.png</file>
        <file alias="dialog-ok-apply.png">../../Z/src/nglwidgets/icons/16x16/dialog-ok-apply.png</file>
        <file alias="document-edit.png">../../Z/src/nglwidgets/icons/16x16/document-edit.png</file>
        <file alias="document-import.png">../../Z/src/nglwidgets/icons/16x16/document-import.png</file>
        <file alias="document-new.png">../../Z/src/nglwidgets/icons/16x16/document-new.png</file>
        <file alias="document-open-data.png">../../Z/src/nglwidgets/icons/16x16/document-open-data.png</file>
        <file alias="document-save.png">../../Z/src/nglwidgets/icons/16x16/document-save.png</file>
        <file alias="edit-copy.png">../../Z/src/nglwidgets/icons/16x16/edit-copy.png</file>
        <file alias="edit-delete.png">../../Z/src/nglwidgets/icons/16x16/edit-delete.png</file>
        <file alias="edit-paste.png">../../Z/src/nglwidgets/icons/16x16/edit-paste.png</file>
        <file alias="edit-redo.png">../../Z/src/nglwidgets/icons/16x16/edit-redo.png</file>
        <file alias="go-down.png">../../Z/src/nglwidgets/icons/16x16/go-down.png</file>
        <file alias="go-up.png">../../Z/src/nglwidgets/icons/16x16/go-up.png</file>
        <file alias="list-add.png">../../Z/src/nglwidgets/icons/16x16/list-add.png</file>
        <file alias="list-remove.png">../../Z/src/nglwidgets/icons/16x16/list-remove.png</file>
        <file alias="mail-send.png">../../Z/src/nglwidgets/icons/16x16/mail-send.png</file>
        <file alias="media-play-normal.png">../../Z/src/nglwidgets/icons/16x16/media-play-normal.png</file>
        <file alias="media-playback-start.png">../../Z/src/nglwidgets/icons/16x16/media-playback-start.png</file>
        <file alias="media-playback-stop.png">../../Z/src/nglwidgets/icons/16x16/media-playback-stop.png</file>
        <file alias="rde_16x16.png">../../Z/src/nglwidgets/icons/16x16/rde_16x16.png</file>
    </qresource>
 </RCC>
@@ -5,12 +5,6 @@
 #
 #ADD_SUBDIRECTORY(TetraTestServer)
 IF(NOT RELEASE_BUILD)
  ADD_SUBDIRECTORY(LastTest)
  ADD_SUBDIRECTORY(LastTestAuswertung)
 ENDIF()
 SET(PrtCnv_SRCS
  logger.h
  logger.cpp
@@ -2,9 +2,7 @@
 # Unit tests for the TetraIF modules (CoPrtCnv, LogView, PrtCnv).
 # One test executable per module, each registered with ctest.
 #
-# LogView: the module's classes are compiled into the LogView executable,
+# LogView: the module is classes are compiled into the LogView executable
 # so the test compiles the pure class source (IntegerCalculator) directly
 # instead of linking a library.
 #
 if (NOT BUILD_TESTING)
@@ -34,8 +32,6 @@ TARGET_LINK_LIBRARIES(logview_unit_test
 ADD_TEST(NAME logview_unit_test COMMAND $<TARGET_FILE:logview_unit_test>)
 # --- PrtCnv: PrtCnvMember (fragmented telegram handling) --------------------
 # PrtCnvLib is built with hidden visibility, so the test compiles the class
 # source directly instead of linking the library.
 if (TARGET CoPrtCnv)
  ADD_EXECUTABLE(prtcnv_unit_test
    prtcnv_unit_test.cpp
@@ -28,18 +28,3 @@ NGL_TARGET_LINK_LIBRARIES(nglcompression
 )
 # BZip2 disabled - no linking needed
 NGL_INSTALL_TARGET(nglcompression)
 IF(BUILD_WS AND BUILD_TESTING)
  REMOVE_DEFINITIONS(-DQT_GUI_LIB)
  ADD_EXECUTABLE(nglcomp_test nglcomp_test.cpp nglcomp_test.h)
  TARGET_LINK_LIBRARIES(nglcomp_test
      NGLLogger
      nglcoreapplication
      ngltools
      nglcompression
      Qt6::Test
      )
  ADD_TEST(NAME nglcomp_test COMMAND $<TARGET_FILE:nglcomp_test>)
 ENDIF()
@@ -83,11 +83,13 @@ NGL_WRAP_UI(nglwidgets_SRCS
 )
 # Collect big resource QRCs
-set(oxygen_SRCS nglresources.qrc)
+set(oxygen_SRCS)
 if(TARGET Qt6::Core)
-  # Use Qt6's CMake helper to generate resource sources so resources are available at runtime
+  # Use Qt6's CMake helper to generate resource sources so resources are available at runtime.
-  qt_add_resources(RME_LIGHT_RCC rme_light_style.qrc)
+  # Both qrcs MUST go through qt_add_resources: a raw .qrc left in the source list is not
-  list(APPEND oxygen_SRCS ${RME_LIGHT_RCC})
+  # compiled (CMAKE_AUTORCC is off), so its resources would be missing at runtime
  # (e.g. :icons/16x16/* toolbar/window icons used by LogView).
  qt_add_resources(oxygen_SRCS nglresources.qrc rme_light_style.qrc)
 else()
  NGL_ADD_BIG_RESOURCES(oxygen_SRCS nglresources.qrc rme_light_style.qrc)
 endif()
@@ -1,125 +0,0 @@
 IF(ARCGIS_INCLUDE_DIR AND ARCGIS_LIBRARY)
  SET(ARCGIS_FOUND TRUE)
 ELSE()
  INCLUDE(FindLibraryWithDebug)
  INCLUDE(FindPackageHandleStandardArgs)
  SET(QT_MIN_VERSION 6.0.0)
  FIND_PACKAGE(Qt6 COMPONENTS Core Gui Location Network Sensors)
  IF (NOT Qt6_FOUND)
    MESSAGE(WARNING "Qt6 not found; skipping ArcGIS")
    SET(BUILD_ARCGIS OFF CACHE BOOL "Build ArcGIS SDK dependent modules" FORCE)
    RETURN()
  ENDIF()
  SET(_arcgis_include_hint "${CMAKE_SOURCE_DIR}/external/ArcGIS/MapsSDK_Qt_300.0.0/ArcGIS_Maps_SDK_Qt_300.0.0/qt300.0.0/sdk/include")
  SET(_arcgis_library_hint "${CMAKE_SOURCE_DIR}/external/ArcGIS/MapsSDK_Qt_300.0.0/ArcGIS_Maps_SDK_Qt_300.0.0/qt300.0.0/sdk/linux/x64/lib")
  # Check if paths exist, if not try alternative paths
  IF(NOT EXISTS "${_arcgis_include_hint}")
    SET(_arcgis_include_hint "${CMAKE_SOURCE_DIR}/../../external/ArcGIS/MapsSDK_Qt_300.0.0/ArcGIS_Maps_SDK_Qt_300.0.0/qt300.0.0/sdk/include")
    SET(_arcgis_library_hint "${CMAKE_SOURCE_DIR}/../../external/ArcGIS/MapsSDK_Qt_300.0.0/ArcGIS_Maps_SDK_Qt_300.0.0/qt300.0.0/sdk/linux/x64/lib")
  ENDIF()
  SET(_arcgis_lib_dir $ENV{ARCGIS_LIB_DIR})
  SET(_arcgis_inc_dir $ENV{ARCGIS_INC_DIR})
  IF (NOT ${_arcgis_lib_dir} STREQUAL "")
    SET(_arcgis_library_hint "${_arcgis_lib_dir}")
  ENDIF()
  IF (NOT ${_arcgis_inc_dir} STREQUAL "")
    SET(_arcgis_include_hint "${_arcgis_inc_dir}")
  ENDIF()
  IF(WIN32)
    GET_FILENAME_COMPONENT(_arcgis_root_path  "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Wow6432Node\\ESRI\\ArcGISRuntimeQt100.0.0;InstallDir]" ABSOLUTE)
    IF(_arcgis_root_path)
      SET(_arcgis_include_hint "${_arcgis_root_path}/sdk/windows/include/")
      SET(_arcgis_library_hint "${_arcgis_root_path}/sdk/windows/x86/lib/")
    ELSE()
      SET(_root "$ENV{KDEROOT}")
      FILE(TO_CMAKE_PATH "${_root}" _root)
      IF(NOT EXISTS "${_root}" OR NOT IS_DIRECTORY "${_root}")
        SET(_root $ENV{WORKSPACE})
        FILE(TO_CMAKE_PATH "${_root}" _root)
      ENDIF()
      IF(NOT EXISTS "${_root}" OR NOT IS_DIRECTORY "${_root}")
        SET(_root ${EXTERNAL_LIBRARY_DIR})
        FILE(TO_CMAKE_PATH "${_root}" _root)
      ENDIF()
      SET(_arcgis_include_hint "${_root}/include/")
      SET(_arcgis_library_hint "${_root}/lib/")
    ENDIF()
  ENDIF()
  FIND_PATH(ARCGIS_INCLUDE_DIR ArcGISQt_global.h HINTS ${_arcgis_include_hint})
  FIND_LIBRARY(ARCGIS_LIBRARY NAMES EsriRuntimeQt HINTS ${_arcgis_library_hint})
  FIND_LIBRARY(ARCGIS_COMMON_LIBRARY NAMES EsriCommonQt HINTS ${_arcgis_library_hint})
  IF (UNIX)
    FIND_LIBRARY(ARCGIS_CPP_LIBRARY NAMES runtimecore HINTS ${_arcgis_library_hint})
  ENDIF()
  FIND_PACKAGE_HANDLE_STANDARD_ARGS(ArcGIS DEFAULT_MSG ARCGIS_LIBRARY ARCGIS_INCLUDE_DIR)
  MARK_AS_ADVANCED(ARCGIS_INCLUDE_DIR ARCGIS_LIBRARY)
  IF(NOT ARCGIS_FOUND)
    SET(BUILD_ARCGIS OFF CACHE BOOL "Build ArcGIS SDK dependent modules" FORCE)
  ENDIF()
 ENDIF()
 IF(NOT TARGET ArcGIS::ArcGIS)
  ADD_LIBRARY(ArcGIS::ArcGIS UNKNOWN IMPORTED)
  SET_PROPERTY(TARGET ArcGIS::ArcGIS PROPERTY INTERFACE_INCLUDE_DIRECTORIES        "${ARCGIS_INCLUDE_DIR}")
  SET_PROPERTY(TARGET ArcGIS::ArcGIS PROPERTY INTERFACE_SYSTEM_INCLUDE_DIRECTORIES "${ARCGIS_INCLUDE_DIR}") 
  IF(ARCGIS_LIBRARY_RELEASE)
    SET_PROPERTY(TARGET ArcGIS::ArcGIS APPEND PROPERTY IMPORTED_CONFIGURATIONS RELEASE)
    SET_PROPERTY(TARGET ArcGIS::ArcGIS PROPERTY IMPORTED_LOCATION_RELEASE "${ARCGIS_LIBRARY_RELEASE}")
  ENDIF()
  IF(ARCGIS_LIBRARY_DEBUG)
    SET_PROPERTY(TARGET ArcGIS::ArcGIS APPEND PROPERTY IMPORTED_CONFIGURATIONS DEBUG)
    SET_PROPERTY(TARGET ArcGIS::ArcGIS PROPERTY IMPORTED_LOCATION_DEBUG "${ARCGIS_LIBRARY_DEBUG}")
  ENDIF()
  IF(NOT ARCGIS_LIBRARY_RELEASE AND NOT ARCGIS_LIBRARY_DEBUG)
    SET_PROPERTY(TARGET ArcGIS::ArcGIS PROPERTY IMPORTED_LOCATION "${ARCGIS_LIBRARY}")
  ENDIF()
  # APPEND (not replace): line 95 above set the ArcGIS SDK include dir; a plain
  # SET_PROPERTY here overwrote it, so consumers (e.g. advancedSymbology) never
  # saw <Symbol.h> etc. Base-state defect carried over from the legacy Qt5 file
  # (identical overwrite of the Qt5 include dirs), never surfaced because the
  # ArcGIS-ON GROUP5 path was never validated in this pipeline.
  SET_PROPERTY(TARGET ArcGIS::ArcGIS APPEND PROPERTY INTERFACE_INCLUDE_DIRECTORIES
    $<TARGET_PROPERTY:Qt6::Core,INTERFACE_INCLUDE_DIRECTORIES>
    $<TARGET_PROPERTY:Qt6::Location,INTERFACE_INCLUDE_DIRECTORIES>
    $<TARGET_PROPERTY:Qt6::Network,INTERFACE_INCLUDE_DIRECTORIES>
    $<TARGET_PROPERTY:Qt6::Sensors,INTERFACE_INCLUDE_DIRECTORIES>
    )
  IF (UNIX)
    IF(ARCGIS_COMMON_LIBRARY_RELEASE)
      SET_PROPERTY(TARGET ArcGIS::ArcGIS APPEND PROPERTY INTERFACE_LINK_LIBRARIES $<$<CONFIG:Release>:"${ARCGIS_COMMON_LIBRARY_RELEASE}">)
      SET_PROPERTY(TARGET ArcGIS::ArcGIS APPEND PROPERTY INTERFACE_LINK_LIBRARIES $<$<CONFIG:Release>:"${ARCGIS_CPP_LIBRARY_RELEASE}">)
    ENDIF()
    IF(ARCGIS_COMMON_LIBRARY_DEBUG)
      SET_PROPERTY(TARGET ArcGIS::ArcGIS APPEND PROPERTY INTERFACE_LINK_LIBRARIES $<$<CONFIG:Debug>:"${ARCGIS_COMMON_LIBRARY_DEBUG}">)
      SET_PROPERTY(TARGET ArcGIS::ArcGIS APPEND PROPERTY INTERFACE_LINK_LIBRARIES $<$<CONFIG:Debug>:"${ARCGIS_CPP_LIBRARY_DEBUG}">)
    ENDIF()
    IF(ARCGIS_COMMON_LIBRARY AND NOT ARCGIS_COMMON_LIBRARY_RELEASE AND NOT ARCGIS_COMMON_LIBRARY_DEBUG)
      SET_PROPERTY(TARGET ArcGIS::ArcGIS APPEND PROPERTY INTERFACE_LINK_LIBRARIES "${ARCGIS_COMMON_LIBRARY}" "${ARCGIS_CPP_LIBRARY}")
    ENDIF()
  ELSE()
    IF(ARCGIS_COMMON_LIBRARY_RELEASE)
      SET_PROPERTY(TARGET ArcGIS::ArcGIS APPEND PROPERTY INTERFACE_LINK_LIBRARIES $<$<CONFIG:Release>:${ARCGIS_COMMON_LIBRARY_RELEASE}>)
      SET_PROPERTY(TARGET ArcGIS::ArcGIS APPEND PROPERTY INTERFACE_LINK_LIBRARIES $<$<CONFIG:RelWithDebInfo>:${ARCGIS_COMMON_LIBRARY_RELEASE}>)
    ENDIF()
    IF(ARCGIS_COMMON_LIBRARY_DEBUG)
      SET_PROPERTY(TARGET ArcGIS::ArcGIS APPEND PROPERTY INTERFACE_LINK_LIBRARIES $<$<CONFIG:Debug>:${ARCGIS_COMMON_LIBRARY_DEBUG}>)
    ENDIF()
    IF(ARCGIS_COMMON_LIBRARY AND NOT ARCGIS_COMMON_LIBRARY_RELEASE AND NOT ARCGIS_COMMON_LIBRARY_DEBUG)
      SET_PROPERTY(TARGET ArcGIS::ArcGIS APPEND PROPERTY INTERFACE_LINK_LIBRARIES "${ARCGIS_COMMON_LIBRARY}")
    ENDIF()
  ENDIF()
 ENDIF()
@@ -1,26 +0,0 @@
 INCLUDE(FindPackageHandleStandardArgs)
 INCLUDE(FindLibraryWithDebug)
 # Allow user to supply BGVIEWER_DIR or check ./external/BgViewer by default
 if(NOT DEFINED BGVIEWER_DIR)
  if(DEFINED ENV{EXTERNAL_DIR})
    set(_external_hint "$ENV{EXTERNAL_DIR}")
  else()
    set(_external_hint "${CMAKE_SOURCE_DIR}/external")
  endif()
  set(BGVIEWER_DIR "${_external_hint}/BgViewer" CACHE PATH "BgViewer root directory (optional)")
 endif()
 # Search in common system locations and in BGVIEWER_DIR
 set(_hints "${BGVIEWER_DIR}/lib" "${BGVIEWER_DIR}/lib/*" "${BGVIEWER_DIR}/lib/*/*")
 FIND_LIBRARY_WITH_DEBUG(BGVIEWER_DTENTITY_LIBRARY WIN32_DEBUG_POSTFIX d dtEntity HINTS ${_hints})
 FIND_LIBRARY_WITH_DEBUG(BGVIEWER_DTENTITYOSG_LIBRARY WIN32_DEBUG_POSTFIX d dtEntityOSG HINTS ${_hints})
 FIND_PATH(BGVIEWER_INCLUDE_DIR dtEntity/export.h HINTS "${BGVIEWER_DIR}/include" "${BGVIEWER_DIR}/include/dtEntity" ${_hints} )
 FIND_PACKAGE_HANDLE_STANDARD_ARGS(BgViewer DEFAULT_MSG
                                  BGVIEWER_DTENTITY_LIBRARY
                                  BGVIEWER_DTENTITYOSG_LIBRARY
                                  BGVIEWER_INCLUDE_DIR)
 SET(BGVIEWER_LIBRARIES ${BGVIEWER_DTENTITYOSG_LIBRARY}
                       ${BGVIEWER_DTENTITY_LIBRARY})
@@ -1,48 +0,0 @@
 include(FindPkgConfig)
 if(NOT BOTAN_FOUND)
  pkg_check_modules(Botan botan-2)
 endif()
 if(NOT BOTAN_FOUND)
  find_path(BOTAN_INCLUDE_DIRS NAMES botan/botan.h
      PATH_SUFFIXES botan-2
      DOC "The botan include directory")
  find_library(BOTAN_LIBRARIES NAMES botan botan-2
      DOC "The botan library")
  include(FindPackageHandleStandardArgs)
  find_package_handle_standard_args(Botan REQUIRED_VARS BOTAN_LIBRARIES BOTAN_INCLUDE_DIRS)
  if(BOTAN_FOUND)
    set(BOTAN_LIBRARY ${BOTAN_LIBRARIES} CACHE INTERNAL "")
    set(BOTAN_INCLUDE_DIR ${BOTAN_INCLUDE_DIRS} CACHE INTERNAL "")
    set(BOTAN_FOUND ${BOTAN_FOUND} CACHE INTERNAL "")
  endif()
 endif()
 mark_as_advanced(BOTAN_INCLUDE_DIRS BOTAN_LIBRARIES)
@@ -1,43 +0,0 @@
 # Find module for Grantlee5 (Qt5) / Grantlee (Qt6 compatible)
 # Grantlee 5.3.0 provides Qt6-compatible targets
 if (TARGET Grantlee5::Templates)
  set(Grantlee5_FOUND TRUE)
  return()
 endif()
 # Try config-mode: look for Grantlee5Config.cmake in standard locations
 # Grantlee 5.3.0 installs to /usr/local/lib/cmake/Grantlee5/
 find_package(Grantlee5 CONFIG QUIET)
 if(TARGET Grantlee5::Templates)
  set(Grantlee5_FOUND TRUE)
  return()
 endif()
 # Try pkg-config as a best-effort (may fail)
 find_package(PkgConfig QUIET)
 if (PKG_CONFIG_FOUND)
  pkg_check_modules(GRANTLEE5 QUIET grantlee-templates)
  if (GRANTLEE5_FOUND)
    set(Grantlee5_FOUND TRUE)
    # No imported targets provided by this shim
    return()
  endif()
 endif()
 # Try config-mode: look for Grantlee5Config.cmake in CMAKE_PREFIX_PATH or installed location
 # Try to locate Grantlee5Config.cmake via common locations: CMAKE_PREFIX_PATH, EXTERNAL_DIR, repo/external, and typical install paths
 find_file(_Grantlee5Config NAMES Grantlee5Config.cmake
  PATHS ${CMAKE_PREFIX_PATH} $ENV{EXTERNAL_DIR} ${CMAKE_SOURCE_DIR}/../external /home/torsten/swy/sandbox/external /repo/external /repo/external/grantlee /usr/local/lib/cmake/Grantlee5
  PATH_SUFFIXES grantlee/lib/cmake/Grantlee5 lib/cmake/Grantlee5)
 if(_Grantlee5Config)
  include(${_Grantlee5Config})
  if(TARGET Grantlee5::Templates)
    set(Grantlee5_FOUND TRUE)
    return()
  endif()
 endif()
 # Not found: provide helpful message and stop. Downstream CMakeLists check TARGET Grantlee5::Templates
 set(Grantlee5_FOUND FALSE)
 message(STATUS "Grantlee5 not found (shim cmake/FindGrantlee5.cmake); codegen_grantlee will be skipped if present.")
@@ -1,40 +0,0 @@
 IF(KDCHART_INCLUDE_DIRS AND KDCHART_LIBRARY)
  SET(KDCHART_FOUND TRUE)
 ELSE()
  FIND_PATH(KDCHART_INCLUDE_DIRS KDChart/kdchart_export.h)
  FIND_LIBRARY(KDCHART_LIBRARY NAMES kdchart)
  INCLUDE(FindPackageHandleStandardArgs)
  FIND_PACKAGE_HANDLE_STANDARD_ARGS(KDChart DEFAULT_MSG KDCHART_LIBRARY KDCHART_INCLUDE_DIRS)
  MARK_AS_ADVANCED(KDCHART_INCLUDE_DIRS KDCHART_LIBRARY)
 ENDIF()
 IF(NOT TARGET KDChart::KDChart)
  ADD_LIBRARY(KDChart::KDChart UNKNOWN IMPORTED)
  SET_PROPERTY(TARGET KDChart::KDChart PROPERTY INTERFACE_INCLUDE_DIRECTORIES        "${KDCHART_INCLUDE_DIRS}")
  SET_PROPERTY(TARGET KDChart::KDChart PROPERTY INTERFACE_SYSTEM_INCLUDE_DIRECTORIES "${KDCHART_INCLUDE_DIRS}") 
  SET_PROPERTY(TARGET KDChart::KDChart PROPERTY IMPORTED_LOCATION                    "${KDCHART_LIBRARY}")
 ENDIF()
@@ -1,62 +0,0 @@
 # Qt6 only - no Qt5 fallback
 find_package(Qt6 COMPONENTS Core Gui PrintSupport Sql Svg Widgets Xml QUIET)
 if(NOT Qt6_FOUND)
  set(KDReports_FOUND FALSE)
  return()
 endif()
 set(_qt_prefix "Qt6")
 # Prefer KDReports-qt6 package config if installed under standard prefixes
 # Search in common installation locations for KDReports cmake config
 list(APPEND CMAKE_PREFIX_PATH /usr/local /usr)
 find_package(KDReports-qt6 CONFIG QUIET PATHS /usr/local/lib/cmake/KDReports-qt6 /usr/local/lib64/cmake/KDReports-qt6 /usr/lib/cmake/KDReports-qt6 /usr/lib64/cmake/KDReports-qt6)
 if(KDReports-qt6_FOUND OR KDReports-qt6_CONFIG)
  message(STATUS "Found KDReports-qt6 package config")
  set(KDREPORTS_FOUND TRUE)
  set(KDReports_FOUND TRUE)
  # KDReports-qt6 config provides KDReports::KDReports imported target
  # Set variables for compatibility with code that uses them
  set(KDREPORTS_INCLUDE_DIR "/usr/local/include/KDReports-qt6")
  set(KDREPORTS_KDREPORTS_INCLUDE_DIR "/usr/local/include/KDReports-qt6")
  # Check lib64 first, then lib
  if(EXISTS "/usr/local/lib64/libkdreports-qt6.so")
    set(KDREPORTS_LIBRARY "/usr/local/lib64/libkdreports-qt6.so")
  else()
    set(KDREPORTS_LIBRARY "/usr/local/lib/libkdreports-qt6.so")
  endif()
 else()
  # Search both /usr and /usr/local for apt-installed or manually built KDReports
  FIND_PATH(KDREPORTS_INCLUDE_DIR   KDReports/KDReports.h PATHS /usr/include /usr/local/include)
  FIND_PATH(KDREPORTS_KDREPORTS_INCLUDE_DIR KDReports.h PATH_SUFFIXES KDReports PATHS /usr/include /usr/local/include)
  FIND_LIBRARY(KDREPORTS_LIBRARY NAMES kdreports kdreport kdreports-qt6 PATHS /usr/lib /usr/lib64 /usr/local/lib /usr/local/lib64)
  INCLUDE(FindPackageHandleStandardArgs)
  FIND_PACKAGE_HANDLE_STANDARD_ARGS(KDReports DEFAULT_MSG
                                    KDREPORTS_LIBRARY
                                    KDREPORTS_INCLUDE_DIR
                                    KDREPORTS_KDREPORTS_INCLUDE_DIR
                                    )
  MARK_AS_ADVANCED(KDREPORTS_INCLUDE_DIR KDREPORTS_LIBRARY)
  MARK_AS_ADVANCED(KDREPORTS_KDREPORTS_INCLUDE_DIR KDREPORTS_LIBRARY)
 endif()
 # The root CMakeLists may already have created a no-op stub target for
 # KDReports::KDReports (before FindKDReports ran). When the library was found,
 # upgrade that existing target to the real imported target instead of skipping.
 IF(KDReports_FOUND)
  IF(NOT TARGET KDReports::KDReports)
    ADD_LIBRARY(KDReports::KDReports UNKNOWN IMPORTED)
  ENDIF()
  SET_PROPERTY(TARGET KDReports::KDReports PROPERTY INTERFACE_INCLUDE_DIRECTORIES        "${KDREPORTS_INCLUDE_DIR}" "${KDREPORTS_KDREPORTS_INCLUDE_DIR}")
  SET_PROPERTY(TARGET KDReports::KDReports PROPERTY INTERFACE_SYSTEM_INCLUDE_DIRECTORIES "${KDREPORTS_INCLUDE_DIR}" "${KDREPORTS_KDREPORTS_INCLUDE_DIR}")
  SET_PROPERTY(TARGET KDReports::KDReports PROPERTY IMPORTED_LOCATION                    "${KDREPORTS_LIBRARY}")
  SET_PROPERTY(TARGET KDReports::KDReports PROPERTY INTERFACE_COMPILE_DEFINITIONS        "")
  SET_PROPERTY(TARGET KDReports::KDReports APPEND PROPERTY INTERFACE_LINK_LIBRARIES ${_qt_prefix}::Core ${_qt_prefix}::Gui ${_qt_prefix}::PrintSupport ${_qt_prefix}::Widgets)
 ELSE()
  IF(NOT TARGET KDReports::KDReports)
    ADD_LIBRARY(KDReports::KDReports UNKNOWN IMPORTED)
  ENDIF()
 ENDIF()
@@ -1,134 +0,0 @@
 IF(NGS_INCLUDE_DIRS AND NGS_LIBRARIES)
  SET(NGS_FOUND TRUE)
 ELSE()
  SET(FOM_NAME "RPRFOM20d17E")
  IF("$ENV{NGS_ROOT}" STREQUAL "")
    SET(NGS_ROOT "/opt/NGS/NGSPublic")
    MESSAGE(STATUS "NGS_ROOT env var not set - using ${NGS_ROOT}")
  ELSE()
    SET(NGS_ROOT "$ENV{NGS_ROOT}")
  ENDIF()
  FIND_PROGRAM(NGS_FOMBUILD fombuild
            PATHS ${NGS_ROOT}/exe
            )
  FIND_PATH(NGS_INCLUDE_DIR NGSUtils/SimTime.h
            PATHS ${NGS_ROOT}/include
            )
  FIND_PATH(NGS_SM_INCLUDE_DIR ISystem.h
            PATHS ${NGS_INCLUDE_DIR}
            PATH_SUFFIXES SimulationManager
            )
  FIND_PATH(NGS_FC_INCLUDE_DIR IRTIAmbassador.h
            PATHS ${NGS_INCLUDE_DIR}
            PATH_SUFFIXES RTIFacadeAPI
            )
  FIND_PATH(NGS_GE_INCLUDE_DIR SimulatedWorldAPI.h
            PATHS ${NGS_INCLUDE_DIR}
            PATH_SUFFIXES SWGeneral
            )
  FIND_PATH(NGS_UT_INCLUDE_DIR NGSConfig.h
            PATHS ${NGS_INCLUDE_DIR}
            PATH_SUFFIXES NGSUtils
            )
  FIND_PATH(NGS_PF_INCLUDE_DIR configureBool.h
            PATHS ${NGS_INCLUDE_DIR}
            PATH_SUFFIXES NGSPlatformConfigure
            )
  FIND_PATH(NGS_FOM_INCLUDE_DIR WorldLocationStruct.h
            PATHS ${NGS_INCLUDE_DIR}
            PATH_SUFFIXES sw${FOM_NAME}/rpr
            PATH_SUFFIXES sw${FOM_NAME}/rpr2
            )
  FIND_LIBRARY(NGS_LIBRARY NGS
            PATHS ${NGS_ROOT}/lib
            PATHS ${NGS_ROOT}/lib64
            )
  FIND_LIBRARY(NGS_LIBRARY_SWGENERAL SWGENERAL
            PATHS ${NGS_ROOT}/lib
            PATHS ${NGS_ROOT}/lib64
            )
  FIND_LIBRARY(NGS_LIBRARY_UTILS NGSUtils
            PATHS ${NGS_ROOT}/lib
            PATHS ${NGS_ROOT}/lib64
            )
  FIND_LIBRARY(FOM_LIBRARY SW${FOM_NAME}
            PATHS ${NGS_ROOT}/lib
            PATHS ${NGS_ROOT}/lib64
            )
  FIND_LIBRARY(NGS_LIBRARY_CORBA CorbaNotify
            PATHS ${NGS_ROOT}/lib/CorbaNotifyCdr
            )
  INCLUDE(FindPackageHandleStandardArgs)
  FIND_PACKAGE_HANDLE_STANDARD_ARGS(NGS DEFAULT_MSG NGS_LIBRARY
                                                    NGS_LIBRARY_SWGENERAL
                                                    NGS_LIBRARY_UTILS
                                                    NGS_LIBRARY_CORBA
                                                    FOM_LIBRARY
                                                    NGS_SM_INCLUDE_DIR
                                                    NGS_FC_INCLUDE_DIR
                                                    NGS_GE_INCLUDE_DIR
                                                    NGS_UT_INCLUDE_DIR
                                                    )
  SET(NGS_INCLUDE_DIRS
    ${NGS_INCLUDE_DIR}
    ${NGS_SM_INCLUDE_DIR}
    ${NGS_FC_INCLUDE_DIR}
    ${NGS_GE_INCLUDE_DIR}
    ${NGS_UT_INCLUDE_DIR}
    ${NGS_PF_INCLUDE_DIR}
    ${NGS_FOM_INCLUDE_DIR}
    CACHE STRING "All ngs include dirs" FORCE
  )
  SET(NGS_LIBRARIES
      ${NGS_LIBRARY}
      ${NGS_LIBRARY_SWGENERAL}
      ${NGS_LIBRARY_UTILS}
      ${NGS_LIBRARY_CORBA}
      ${FOM_LIBRARY}
      CACHE STRING "All ngs libraries" FORCE
  )
  MARK_AS_ADVANCED(NGS_INCLUDE_DIR NGS_LIBRARY FOM_LIBRARY)
 ENDIF()
 SET(NGS_IS_GUEZ OFF)
 SET(NGS_IS_AHTC OFF)
 IF (NGS_FOUND)
  FIND_PATH(NGS_GUEZ_INCLUDE_DIR TacticalStatusStruct.h
            PATHS ${NGS_FOM_INCLUDE_DIR})
  FIND_PATH(NGS_AHTC_INCLUDE_DIR LongBowApacheObjClass.h
            PATHS ${NGS_FOM_INCLUDE_DIR})
  IF (NGS_GUEZ_INCLUDE_DIR AND EXISTS "${NGS_GUEZ_INCLUDE_DIR}/TacticalStatusStruct.h")
    SET(NGS_IS_GUEZ ON)
    MESSAGE(STATUS "NGS - GUEZ version (${NGS_GUEZ_INCLUDE_DIR})")
  ELSE()
    SET(NGS_IS_GUEZ OFF)
  ENDIF()
  IF (NGS_AHTC_INCLUDE_DIR AND EXISTS "${NGS_AHTC_INCLUDE_DIR}/LongBowApacheObjClass.h")
    SET(NGS_IS_AHTC ON)
    MESSAGE(STATUS "NGS - AHTC version (${NGS_AHTC_INCLUDE_DIR})")
  ELSE()
    SET(NGS_IS_AHTC OFF)
  ENDIF()
 ENDIF()
 IF(NOT TARGET NGS::NGS)
  ADD_LIBRARY(NGS::NGS UNKNOWN IMPORTED)
  SET_PROPERTY(TARGET NGS::NGS PROPERTY INTERFACE_INCLUDE_DIRECTORIES        ${NGS_INCLUDE_DIRS})
  SET_PROPERTY(TARGET NGS::NGS PROPERTY INTERFACE_SYSTEM_INCLUDE_DIRECTORIES ${NGS_INCLUDE_DIRS}) 
  SET_PROPERTY(TARGET NGS::NGS PROPERTY IMPORTED_LOCATION "${NGS_LIBRARY}")
  SET_PROPERTY(TARGET NGS::NGS APPEND PROPERTY INTERFACE_LINK_LIBRARIES
    "${NGS_LIBRARY_SWGENERAL}"
    "${NGS_LIBRARY_UTILS}"
    "${NGS_LIBRARY_CORBA}"
    "${FOM_LIBRARY}"
    )
 ENDIF()
@@ -1,103 +0,0 @@
 # FindPopplerQt6.cmake - Find Poppler Qt6 bindings
 # Sets: POPPLER_QT6_INCLUDE_DIR, POPPLER_QT6_LIBRARY, PopplerQt6::Poppler target
 if(POPPLER_QT6_INCLUDE_DIR AND POPPLER_QT6_LIBRARY)
  set(POPPLER_QT6_FOUND TRUE)
 else()
  set(_poppler_version_bad FALSE)
  if(NOT WIN32)
    include(FindPkgConfig)
    # Prefer poppler-qt6
    pkg_check_modules(_pc_poppler poppler-qt6)
    if(_pc_poppler_FOUND)
      set(_pc_poppler_pkgname poppler-qt6)
      if(NOT "${_pc_poppler_VERSION}" VERSION_GREATER 0.24.0)
        set(_poppler_version_bad TRUE)
      endif()
    endif()
  endif()
  if(NOT _poppler_version_bad)
    set(POPPLER_QT6_FOUND FALSE)
    # Try library name discovered by pkg-config
    if(_pc_poppler_FOUND)
      set(_pkg_var "pkgcfg_lib__pc_poppler_${_pc_poppler_pkgname}")
      message(STATUS "FindPoppler: pkg-config found ${_pc_poppler_pkgname}, var ${_pkg_var} defined? ${${_pkg_var}}")
      if(DEFINED ${_pkg_var})
        set(POPPLER_QT6_LIBRARY ${${_pkg_var}})
        message(STATUS "FindPoppler: using pkgcfg path ${POPPLER_QT6_LIBRARY}")
      endif()
    endif()
    if(NOT POPPLER_QT6_LIBRARY)
      find_library(POPPLER_QT6_LIBRARY ${_pc_poppler_pkgname}
                   HINTS ${_pc_poppler_LIBRARY_DIRS}
      )
    endif()
    # Fallback: try common library names
    if(NOT POPPLER_QT6_LIBRARY)
      find_library(POPPLER_QT6_LIBRARY NAMES poppler-qt6 poppler-qt6)
    endif()
    # Extra fallback paths
    if(NOT POPPLER_QT6_LIBRARY)
      find_library(POPPLER_QT6_LIBRARY NAMES poppler-qt6 poppler-qt6 
                   PATHS /usr/lib/x86_64-linux-gnu /usr/lib /usr/local/lib)
    endif()
    # Check for headers (Qt6 layout: poppler/qt6/poppler-qt6.h)
    find_path(POPPLER_QT6_INCLUDE_DIR poppler/qt6/poppler-qt6.h
              HINTS ${_pc_poppler_INCLUDE_DIRS}
              PATH_SUFFIXES poppler
    )
    if(POPPLER_QT6_LIBRARY AND POPPLER_QT6_INCLUDE_DIR)
      set(POPPLER_QT6_FOUND TRUE)
      # Expose a modern imported target for consumers
      if(NOT TARGET PopplerQt6::Poppler)
        add_library(PopplerQt6::Poppler UNKNOWN IMPORTED)
        set_target_properties(PopplerQt6::Poppler PROPERTIES
          IMPORTED_LOCATION "${POPPLER_QT6_LIBRARY}"
          INTERFACE_INCLUDE_DIRECTORIES "${POPPLER_QT6_INCLUDE_DIR}"
        )
      endif()
      # Cache the variables
      set(POPPLER_QT6_LIBRARY "${POPPLER_QT6_LIBRARY}" CACHE FILEPATH "Path to poppler-qt6 library")
      set(POPPLER_QT6_INCLUDE_DIR "${POPPLER_QT6_INCLUDE_DIR}" CACHE PATH "Poppler-Qt6 include dirs")
    endif()
  endif()
  if(POPPLER_QT6_LIBRARY AND POPPLER_QT6_INCLUDE_DIR)
    include(FindPackageHandleStandardArgs)
    find_package_handle_standard_args(PopplerQt6 DEFAULT_MSG
                                      POPPLER_QT6_LIBRARY
                                      POPPLER_QT6_INCLUDE_DIR)
  else()
    message(WARNING "Poppler Qt6 bindings not found. Creating placeholder PopplerQt6::Poppler target.")
    set(POPPLER_QT6_LIBRARY "" CACHE STRING "Placeholder poppler library" FORCE)
    set(POPPLER_QT6_INCLUDE_DIR "" CACHE STRING "Placeholder poppler include dir" FORCE)
    if(NOT TARGET PopplerQt6::Poppler)
      add_library(PopplerQt6::Poppler UNKNOWN IMPORTED)
      set_property(TARGET PopplerQt6::Poppler PROPERTY INTERFACE_INCLUDE_DIRECTORIES "")
    endif()
    set(POPPLER_QT6_FOUND TRUE CACHE INTERNAL "Poppler placeholder present")
  endif()
 endif()
@@ -1,333 +0,0 @@
 SET(_rti_gcc_arch "")
 # Suppress CMP0153 warning: EXEC_PROGRAM is deprecated
 if(POLICY CMP0153)
  cmake_policy(SET CMP0153 OLD)
 endif()
 # Check if RTI_DIR is not set OR is empty (cached empty string from previous failed detection)
 IF(NOT RTI_DIR OR RTI_DIR STREQUAL "")
  # First check RTI_INSTALL_DIR CMake variable (set by parent CMakeLists.txt)
  IF(RTI_INSTALL_DIR AND EXISTS "${RTI_INSTALL_DIR}")
    SET(_RTI_DIR "${RTI_INSTALL_DIR}")
  ELSE()
    SET(_arch "unknown")
    IF(WIN32)
      SET(_RTI_DIR $ENV{DDS_PATH})
    IF(NOT _RTI_DIR)
      GET_FILENAME_COMPONENT(_rti_root_path  "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Real-Time Innovations\\RTI Connext DDS Pro 5.2.3;Location]" ABSOLUTE)
      SET(_RTI_DIR "${_rti_root_path}")
    ENDIF()
    IF(MSVC_VERSION EQUAL 1900)
      SET(_rti_msvc_ver "VS2015")
    ELSEIF(MSVC_VERSION GREATER_EQUAL 1910)
      SET(_rti_msvc_ver "VS2017")
    ENDIF()
    IF(CMAKE_SIZEOF_VOID_P EQUAL 8)
      SET(_rti_msvc_ver "x64Win64${_rti_msvc_ver}")
    ELSE()
      SET(_rti_msvc_ver "i86Win32${_rti_msvc_ver}")
    ENDIF()
    IF(NOT ${_rti_root_path})
      SET(_RTI_DIR $ENV{KDEROOT})
      FILE(TO_CMAKE_PATH "${_RTI_DIR}" _RTI_DIR)
      IF(NOT EXISTS "${_RTI_DIR}" OR NOT IS_DIRECTORY "${_RTI_DIR}")
        SET(_RTI_DIR $ENV{WORKSPACE})
        FILE(TO_CMAKE_PATH "${_RTI_DIR}" _RTI_DIR)
      ENDIF()
      IF(NOT EXISTS "${_RTI_DIR}" OR NOT IS_DIRECTORY "${_RTI_DIR}")
        SET(_RTI_DIR ${EXTERNAL_LIBRARY_DIR})
        FILE(TO_CMAKE_PATH "${_RTI_DIR}" _RTI_DIR)
      ENDIF()
    ENDIF()
    SET(_arch "${_rti_msvc_ver}")
  ELSE(WIN32)
    SET(_RTI_DIR $ENV{DDS_PATH})
    IF(NOT _RTI_DIR)
      # Try local external directory first (check multiple levels for different repo structures)
      # Check container path first (/workspace/external), then host-relative paths
      IF(EXISTS "${CMAKE_SOURCE_DIR}/external/rti_connext_dds-7.7.0")
        SET(_RTI_DIR "${CMAKE_SOURCE_DIR}/external/rti_connext_dds-7.7.0")
      ELSEIF(EXISTS "${CMAKE_SOURCE_DIR}/../external/rti_connext_dds-7.7.0")
        SET(_RTI_DIR "${CMAKE_SOURCE_DIR}/../external/rti_connext_dds-7.7.0")
      ELSEIF(EXISTS "${CMAKE_SOURCE_DIR}/../../../external/rti_connext_dds-7.7.0")
        SET(_RTI_DIR "${CMAKE_SOURCE_DIR}/../../../external/rti_connext_dds-7.7.0")
      ELSE()
        SET(_RTI_DIR "/opt/RTI")
      ENDIF()
    ENDIF()
    IF(NOT EXISTS "${_RTI_DIR}" OR NOT IS_DIRECTORY "${_RTI_DIR}")
      MESSAGE(WARNING "RTI directory ${_RTI_DIR} not found; continuing without RTI. Set DDS_PATH to RTI installation to enable RTI features.")
      # mark as not available
      set(_RTI_DIR_NOT_FOUND TRUE)
      set(_RTI_DIR "")
    ENDIF()
    SET(_rti_gcc_arch "x64Linux3gcc4.8.2")
    IF("${CMAKE_CXX_COMPILER_ID}" STREQUAL "GNU" OR "${CMAKE_CXX_COMPILER_ID}" STREQUAL "Clang")
      IF(CMAKE_CXX_COMPILER_VERSION VERSION_GREATER 5.0.0)
        # Prefer newer gcc-based RTI builds; try a sequence then fall back to any x64Linux4gcc* dir found under RTI lib
        SET(_preferred_archs "x64Linux4gcc8.5.0;x64Linux4gcc7.3.0;x64Linux3gcc5.4.0")
        SET(_found_arch "")
        foreach(_cand IN LISTS _preferred_archs)
          if(EXISTS "${_RTI_DIR}/lib/${_cand}")
            SET(_found_arch "${_cand}")
            break()
          endif()
        endforeach()
        if(_found_arch STREQUAL "")
          # fallback: pick any x64Linux* directory under lib
          file(GLOB _rti_arch_dirs RELATIVE "${_RTI_DIR}/lib" "${_RTI_DIR}/lib/x64Linux*")
          list(LENGTH _rti_arch_dirs _rti_arch_dirs_len)
          if(_rti_arch_dirs_len GREATER 0)
            list(GET _rti_arch_dirs 0 _found_arch)
          endif()
        endif()
        if(NOT _found_arch STREQUAL "")
          SET(_rti_gcc_arch "${_found_arch}")
        else()
          # final fallbacks
          SET(_rti_gcc_arch "x64Linux4gcc7.3.0")
        endif()
      ENDIF()
    ENDIF()
    SET(_arch "${_rti_gcc_arch}")
  ENDIF()
  ENDIF()
  SET(RTI_DIR "${_RTI_DIR}" CACHE STRING "RTI base path" FORCE)
  MESSAGE(STATUS "Trying to use RTI from ${RTI_DIR} with arch ${_arch}")
 ELSE()
  # RTI_DIR was provided externally - auto-detect architecture
  SET(_rti_gcc_arch "x64Linux3gcc4.8.2")
  IF("${CMAKE_CXX_COMPILER_ID}" STREQUAL "GNU" OR "${CMAKE_CXX_COMPILER_ID}" STREQUAL "Clang")
    IF(CMAKE_CXX_COMPILER_VERSION VERSION_GREATER 5.0.0)
      # Prefer newer gcc-based RTI builds; try a sequence then fall back to any x64Linux4gcc* dir found under RTI lib
      SET(_preferred_archs "x64Linux4gcc8.5.0;x64Linux4gcc7.3.0;x64Linux3gcc5.4.0")
      SET(_found_arch "")
      foreach(_cand IN LISTS _preferred_archs)
        if(EXISTS "${RTI_DIR}/lib/${_cand}")
          SET(_found_arch "${_cand}")
          break()
        endif()
      endforeach()
      if(_found_arch STREQUAL "")
        # fallback: pick any x64Linux* directory under lib
        file(GLOB _rti_arch_dirs RELATIVE "${RTI_DIR}/lib" "${RTI_DIR}/lib/x64Linux*")
        list(LENGTH _rti_arch_dirs _rti_arch_dirs_len)
        if(_rti_arch_dirs_len GREATER 0)
          list(GET _rti_arch_dirs 0 _found_arch)
        endif()
      endif()
      if(NOT _found_arch STREQUAL "")
        SET(_rti_gcc_arch "${_found_arch}")
      else()
        # final fallbacks
        SET(_rti_gcc_arch "x64Linux4gcc7.3.0")
      endif()
    ENDIF()
  ENDIF()
  MESSAGE(STATUS "Using externally provided RTI from ${RTI_DIR} with arch ${_rti_gcc_arch}")
 ENDIF()
 IF(WIN32)
  SET(_rti_include_hint "${RTI_DIR}/include/")
  SET(_rti_library_hint "${RTI_DIR}/lib/${_rti_msvc_ver}/")
 ELSE()
  SET(_rti_include_hint "${RTI_DIR}/include/")
  SET(_rti_library_hint "${RTI_DIR}/lib/")
 ENDIF()
 IF(NOT RTI_INCLUDE_DIR)
  if(DEFINED _RTI_DIR_NOT_FOUND AND _RTI_DIR STREQUAL "")
    # RTI directory was not found earlier; skip searching for includes and create empty placeholder
    message(WARNING "Skipping RTI include search because RTI installation was not found")
    set(RTI_INCLUDE_DIR "")
    set(RTI_INCLUDE_DIRS "" CACHE STRING "RTI include directories" FORCE)
    # Create placeholder INTERFACE targets for all RTI libraries when RTI is not installed
    # These allow configuration to succeed but will cause link errors if actually used
    SET(_RTI_LIBS nddscore nddsc nddscpp2 rtiroutingservice)
    FOREACH(_lib ${_RTI_LIBS})
      SET(_tgt_name RTI::${_lib})
      IF(NOT TARGET ${_tgt_name})
        ADD_LIBRARY(${_tgt_name} INTERFACE IMPORTED)
        SET_PROPERTY(TARGET ${_tgt_name} PROPERTY INTERFACE_INCLUDE_DIRECTORIES "")
        # Set dummy library variables to satisfy Ninja dependency tracking
        SET(RTI_${_lib}_LIBRARY "" CACHE STRING "RTI ${_lib} library (placeholder)" FORCE)
        SET(RTI_${_lib}_LIBRARY_RELEASE "" CACHE STRING "RTI ${_lib} library release (placeholder)" FORCE)
        SET(RTI_${_lib}_LIBRARY_DEBUG "" CACHE STRING "RTI ${_lib} library debug (placeholder)" FORCE)
      ENDIF()
    ENDFOREACH()
    SET(RTI_LIBRARIES "" CACHE STRING "All rti libraries (placeholder)" FORCE)
    SET(RTI_FOUND FALSE CACHE BOOL "RTI not found" FORCE)
    # Force BUILD_RTI to OFF when RTI is not actually installed
    SET(BUILD_RTI OFF CACHE BOOL "Build with RTI support" FORCE)
    MESSAGE(WARNING "RTI not found - disabling BUILD_RTI. Set DDS_PATH to RTI installation to enable RTI features.")
    return()
  else()
    # Use PATHS instead of HINTS for more reliable path resolution
    FIND_PATH(RTI_INCLUDE_DIR ndds/ndds_cpp.h PATHS ${_rti_include_hint} NO_DEFAULT_PATH)
    IF(RTI_INCLUDE_DIR)
      SET(RTI_INCLUDE_DIRS "${RTI_INCLUDE_DIR}" "${RTI_INCLUDE_DIR}/ndds" "${RTI_INCLUDE_DIR}/ndds/hpp" CACHE STRING "RTI include directories" FORCE)
      MARK_AS_ADVANCED(RTI_INCLUDE_DIRS)
    ELSE()
      MESSAGE(FATAL "Could not find RTI include directory at ${_rti_include_hint}")
    ENDIF()
  endif()
 ENDIF()
 IF(NOT RTI_DDSGEN_EXECUTABLE)
  FIND_PROGRAM(RTI_DDSGEN_EXECUTABLE NAMES rtiddsgen rtiddsgen.bat HINTS ${RTI_DIR}/scripts ${RTI_DIR}/bin)
 ENDIF()
 IF(NOT RTI_VERSION_MAJOR)
  EXEC_PROGRAM(${RTI_DDSGEN_EXECUTABLE} ARGS -version OUTPUT_VARIABLE _dds_version_output)
  STRING(REGEX REPLACE ".* ([0-9]\\.[0-9]\\.[0-9]).*" "\\1" _dds_version_output ${_dds_version_output})
  SET(_rti_version_major 5)
  IF(_dds_version_output VERSION_GREATER 2.9.9)
    SET(_rti_version_major 6)
  ENDIF()
  SET(RTI_VERSION_MAJOR ${_rti_version_major} CACHE STRING "RTI version" FORCE)
 ENDIF()
 INCLUDE(FindPackageHandleStandardArgs)
 # Set policy for imported target library requirements
 if(POLICY CMP0111)
  cmake_policy(SET CMP0111 NEW)
 endif()
 SET(_RTI_LIBS nddscore nddsc nddscpp2 rtiroutingservice)
 SET(_libs "")
 SET(_lib_vars "")
 # Build list of library search paths including arch-specific subdirs
 set(_rti_lib_search_paths "${RTI_DIR}/lib" "${RTI_DIR}/lib/${_rti_gcc_arch}")
 # Also scan for any arch subdirs under lib/
 file(GLOB _rti_arch_dirs "${RTI_DIR}/lib/*")
 foreach(_arch_dir IN LISTS _rti_arch_dirs)
  if(IS_DIRECTORY "${_arch_dir}")
    list(APPEND _rti_lib_search_paths "${_arch_dir}")
  endif()
 endforeach()
 FOREACH(_lib ${_RTI_LIBS})
  SET(_libname "RTI_${_lib}_LIBRARY")
  SET(_libname_release "RTI_${_lib}_LIBRARY_RELEASE")
  SET(_libname_debug "RTI_${_lib}_LIBRARY_DEBUG")
  # Build explicit search paths for this library
  set(_lib_search_paths 
      "${RTI_DIR}/lib/${_rti_gcc_arch}"
      "${RTI_DIR}/lib"
  )
  # Find release library (no suffix)
  FIND_LIBRARY(${_libname_release}
               NAMES ${_lib}
               PATHS ${_lib_search_paths}
               NO_DEFAULT_PATH)
  # Find debug library (d suffix on Linux)
  FIND_LIBRARY(${_libname_debug}
               NAMES ${_lib}d
               PATHS ${_lib_search_paths}
               NO_DEFAULT_PATH)
  # Set combined library variable
  IF(${_libname_release})
    SET(${_libname} "${${_libname_release}}" CACHE STRING "RTI ${_lib} library" FORCE)
  ELSEIF(${_libname_debug})
    SET(${_libname} "${${_libname_debug}}" CACHE STRING "RTI ${_lib} library" FORCE)
  ENDIF()
  SET(_tgt_name RTI::${_lib})
  IF(NOT TARGET ${_tgt_name})
    ADD_LIBRARY(${_tgt_name} UNKNOWN IMPORTED)
    SET_PROPERTY(TARGET ${_tgt_name} PROPERTY INTERFACE_INCLUDE_DIRECTORIES        "${RTI_INCLUDE_DIRS}")
    SET_PROPERTY(TARGET ${_tgt_name} PROPERTY INTERFACE_SYSTEM_INCLUDE_DIRECTORIES "${RTI_INCLUDE_DIRS}")
    IF(UNIX)
      SET_PROPERTY(TARGET ${_tgt_name} PROPERTY INTERFACE_COMPILE_DEFINITIONS      "RTI_UNIX;RTI_LINUX;RTI_64BIT" )
    ENDIF()
    IF(WIN32)
      IF("${_lib}" STREQUAL "rtiroutingservice")
        SET_PROPERTY(TARGET ${_tgt_name} PROPERTY INTERFACE_COMPILE_DEFINITIONS    "RTI_WIN32;RTI_routingservice_DLL_VARIABLE" )
      ELSE()
        SET_PROPERTY(TARGET ${_tgt_name} PROPERTY INTERFACE_COMPILE_DEFINITIONS    "RTI_WIN32;NDDS_DLL_VARIABLE" )
      ENDIF()
    ENDIF()
    # Set library locations - use release for both configs if debug not found
    IF(${_libname}_RELEASE AND ${_libname}_DEBUG)
      SET_PROPERTY(TARGET ${_tgt_name} PROPERTY IMPORTED_CONFIGURATIONS RELEASE DEBUG)
      SET_PROPERTY(TARGET ${_tgt_name} PROPERTY IMPORTED_LOCATION_RELEASE "${${_libname}_RELEASE}")
      SET_PROPERTY(TARGET ${_tgt_name} PROPERTY IMPORTED_LOCATION_DEBUG "${${_libname}_DEBUG}")
      # Set default IMPORTED_LOCATION for non-configured builds
      SET_PROPERTY(TARGET ${_tgt_name} PROPERTY IMPORTED_LOCATION "${${_libname}_RELEASE}")
    ELSEIF(${_libname}_RELEASE)
      SET_PROPERTY(TARGET ${_tgt_name} PROPERTY IMPORTED_CONFIGURATIONS RELEASE DEBUG)
      SET_PROPERTY(TARGET ${_tgt_name} PROPERTY IMPORTED_LOCATION_RELEASE "${${_libname}_RELEASE}")
      SET_PROPERTY(TARGET ${_tgt_name} PROPERTY IMPORTED_LOCATION_DEBUG "${${_libname}_RELEASE}")
      # Set default IMPORTED_LOCATION for non-configured builds
      SET_PROPERTY(TARGET ${_tgt_name} PROPERTY IMPORTED_LOCATION "${${_libname}_RELEASE}")
    ELSEIF(${_libname}_DEBUG)
      SET_PROPERTY(TARGET ${_tgt_name} PROPERTY IMPORTED_CONFIGURATIONS RELEASE DEBUG)
      SET_PROPERTY(TARGET ${_tgt_name} PROPERTY IMPORTED_LOCATION_RELEASE "${${_libname}_DEBUG}")
      SET_PROPERTY(TARGET ${_tgt_name} PROPERTY IMPORTED_LOCATION_DEBUG "${${_libname}_DEBUG}")
      # Set default IMPORTED_LOCATION for non-configured builds
      SET_PROPERTY(TARGET ${_tgt_name} PROPERTY IMPORTED_LOCATION "${${_libname}_DEBUG}")
    ELSE()
      # No library found - skip creating this target
      MESSAGE(WARNING "RTI library ${_lib} not found in ${RTI_DIR}")
      SET(${_libname} "" CACHE STRING "RTI ${_lib} library (not found)" FORCE)
      CONTINUE()
    ENDIF()
  ENDIF()
  LIST(APPEND _libs "${${_libname}}")
  # rtiroutingservice is optional - only add required libs to _lib_vars for FIND_PACKAGE_HANDLE_STANDARD_ARGS
  IF(NOT "${_lib}" STREQUAL "rtiroutingservice")
    LIST(APPEND _lib_vars "${_libname}")
  ENDIF()
 ENDFOREACH()
 IF(TARGET RTI::nddscore AND UNIX)
  SET_PROPERTY(TARGET RTI::nddscore PROPERTY INTERFACE_LINK_LIBRARIES "dl" )
 ENDIF()
 SET(RTI_LIBRARIES ${_libs} CACHE STRING "All rti libraries" FORCE)
 MARK_AS_ADVANCED(RTI_LIBRARIES)
 INCLUDE(FindPackageHandleStandardArgs)
 FIND_PACKAGE_HANDLE_STANDARD_ARGS(RTI DEFAULT_MSG RTI_DIR RTI_INCLUDE_DIR RTI_DDSGEN_EXECUTABLE ${_lib_vars})
@@ -1,40 +0,0 @@
 IF(SCHUSSTAFEL_INCLUDE_DIR AND SCHUSSTAFEL_LIBRARY)
  SET(SCHUSSTAFEL_FOUND TRUE)
 ELSE(SCHUSSTAFEL_INCLUDE_DIR AND SCHUSSTAFEL_LIBRARY)
  FIND_PATH(SCHUSSTAFEL_INCLUDE_DIR Schusstafel.h)
  FIND_LIBRARY_WITH_DEBUG(SCHUSSTAFEL_LIBRARY WIN32_DEBUG_POSTFIX d NAMES Schusstafel libSchusstafel)
  INCLUDE(FindPackageHandleStandardArgs)
  FIND_PACKAGE_HANDLE_STANDARD_ARGS(Schusstafel DEFAULT_MSG SCHUSSTAFEL_LIBRARY SCHUSSTAFEL_INCLUDE_DIR)
  MARK_AS_ADVANCED(SCHUSSTAFEL_INCLUDE_DIR SCHUSSTAFEL_LIBRARY)
 ENDIF(SCHUSSTAFEL_INCLUDE_DIR AND SCHUSSTAFEL_LIBRARY)
@@ -1,104 +0,0 @@
 IF(NOT TMSIF_DIR)
  SET(_arch "unknown")
  SET(_TMSIF_DIR $ENV{TMSIF_PATH})
  IF(NOT _TMSIF_DIR)
    SET(_TMSIF_DIR "/opt/tmsif")
  ENDIF()
  IF(NOT EXISTS "${_TMSIF_DIR}" OR NOT IS_DIRECTORY "${_TMSIF_DIR}")
    MESSAGE(FATAL_ERROR "Umgebungsvariable TMSIF_PATH nicht gesetzt!")
  ENDIF()
  SET(TMSIF_DIR "${_TMSIF_DIR}" CACHE STRING "TMSIF base path" FORCE)
  MESSAGE(STATUS "Trying to use TMSIF_DIR from ${TMSIF_DIR}")
 ENDIF()
 SET(_tmsif_include_hint "${TMSIF_DIR}/include/")
 SET(_tmsif_library_hint "${TMSIF_DIR}/lib/")
 IF(NOT TMSIF_INCLUDE_DIR)
  FIND_PATH(TMSIF_INCLUDE_DIR Common.h HINTS ${_tmsif_include_hint})
  IF(TMSIF_INCLUDE_DIR)
    SET(TMSIF_INCLUDE_DIRS "${TMSIF_INCLUDE_DIR}" "${TMSIF_INCLUDE_DIR}/ddscxx" CACHE STRING "TMSIF include directories" FORCE)
    MARK_AS_ADVANCED(TMSIF_INCLUDE_DIRS)
  ELSE()
    MESSAGE(FATAL "Could not find TMSIF include directory at ${_tmsif_include_hint}")
  ENDIF()
 ENDIF()
 SET(_TMSIF_LIBS tmsif-cyclone ddscxx ddkit-cyclone )
 SET(_libs "")
 SET(_lib_vars "")
 FOREACH(_lib ${_TMSIF_LIBS})
  SET(_libname "TMSIF_${_lib}_LIBRARY")
  IF (NOT ${_libname})
    FIND_LIBRARY_WITH_DEBUG("${_libname}"
                            WIN32_DEBUG_POSTFIX d
                            NAMES ${_lib}
                            HINTS ${_tmsif_library_hint} ${TMSIF_DIR}/lib )
  ENDIF()
  SET(_tgt_name TMSIF::${_lib})
  IF(NOT TARGET ${_tgt_name})
    ADD_LIBRARY(${_tgt_name} UNKNOWN IMPORTED)
    SET_PROPERTY(TARGET ${_tgt_name} PROPERTY INTERFACE_INCLUDE_DIRECTORIES        "${TMSIF_INCLUDE_DIRS}")
    SET_PROPERTY(TARGET ${_tgt_name} PROPERTY INTERFACE_SYSTEM_INCLUDE_DIRECTORIES "${TMSIF_INCLUDE_DIRS}")
    IF(UNIX)
      SET_PROPERTY(TARGET ${_tgt_name} PROPERTY INTERFACE_COMPILE_DEFINITIONS      "TMSIF_UNIX;TMSIF_LINUX;TMSIF_64BIT" )
    ENDIF()
    IF(${_libname}_RELEASE)
      SET_PROPERTY(TARGET ${_tgt_name} APPEND PROPERTY IMPORTED_CONFIGURATIONS RELEASE)
      SET_PROPERTY(TARGET ${_tgt_name} PROPERTY IMPORTED_LOCATION_RELEASE "${${_libname}_RELEASE}")
    ENDIF()
    IF(${_libname}_DEBUG)
      SET_PROPERTY(TARGET ${_tgt_name} APPEND PROPERTY IMPORTED_CONFIGURATIONS DEBUG)
      SET_PROPERTY(TARGET ${_tgt_name} PROPERTY IMPORTED_LOCATION_DEBUG "${${_libname}_DEBUG}")
    ENDIF()
    IF(NOT ${_libname}_RELEASE AND NOT ${_libname}_DEBUG)
      SET_PROPERTY(TARGET ${_tgt_name} PROPERTY IMPORTED_LOCATION "${${_libname}}")
    ENDIF()
  ENDIF()
  LIST(APPEND _libs "${${_libname}}")
  LIST(APPEND _lib_vars "${_libname}")
 ENDFOREACH()
 SET(TMSIF_LIBRARIES ${_libs} CACHE STRING "All TMSIF libraries" FORCE)
 MARK_AS_ADVANCED(TMSIF_LIBRARIES)
 INCLUDE(FindPackageHandleStandardArgs)
 FIND_PACKAGE_HANDLE_STANDARD_ARGS(TMSIF DEFAULT_MSG TMSIF_DIR TMSIF_INCLUDE_DIR ${_lib_vars})
@@ -1,49 +0,0 @@
 IF(VLC_INCLUDE_DIR AND VLC_LIBRARIES)
  SET(VLC_FOUND TRUE)
 ELSE()
  INCLUDE(FindPackageHandleStandardArgs)
  INCLUDE(FindLibraryWithDebug)
  FIND_LIBRARY_WITH_DEBUG(VLC_LIBRARIES WIN32_DEBUG_POSTFIX d NAMES vlc libvlc)
  FIND_PATH(VLC_INCLUDE_DIR vlc/vlc.h)
  FIND_PACKAGE_HANDLE_STANDARD_ARGS(VLC DEFAULT_MSG VLC_LIBRARIES VLC_INCLUDE_DIR)
  FIND_PATH(VLC_IS_2_0_ABOVE vlc/libvlc_version.h
            PATHS ${VLC_INCLUDE_DIR}
            NO_DEFAULT_PATH)
  IF(NOT VLC_IS_2_0_ABOVE)
    MESSAGE(FATAL_ERROR "Need at least VLC 2.x")
  ENDIF()
  MARK_AS_ADVANCED(VLC_DEFINES)
 ENDIF()
@@ -1,81 +0,0 @@
 IF(XSD_INCLUDE_DIR AND XSD_COMPILER)
  SET(XSD_FOUND TRUE)
 ELSE(XSD_INCLUDE_DIR AND XSD_COMPILER)
  FIND_PROGRAM(XSD_COMPILER NAMES xsdcxx xsd)
  FIND_PATH(XSD_INCLUDE_DIR xsd/cxx/config.hxx)
  FIND_PACKAGE_HANDLE_STANDARD_ARGS(XSD DEFAULT_MSG
                                    XSD_COMPILER
                                    XSD_INCLUDE_DIR
  )
  MARK_AS_ADVANCED(XSD_COMPILER
                   XSD_INCLUDE_DIR)
 ENDIF(XSD_INCLUDE_DIR AND XSD_COMPILER)
 MACRO(XSD_GENERATE_TREE srcList infile)
  GET_FILENAME_COMPONENT(output  ${infile} NAME)
  GET_FILENAME_COMPONENT(input   ${infile} ABSOLUTE)
  GET_FILENAME_COMPONENT(dir     ${infile} DIRECTORY)
  EXEC_PROGRAM(${XSD_COMPILER} ARGS version OUTPUT_VARIABLE _xsd_version_output)
  STRING(REGEX REPLACE ".* ([0-9]\\.[0-9]\\.[0-9]).*" "\\1" _xsd_version_output ${_xsd_version_output})
  SET(_xsd_in  ${input})
  SET(_cpp_out ${dir}/${output}.cxx)
  SET(_hpp_out ${dir}/${output}.hxx)
  STRING(REPLACE ".xsd" "" _cpp_out "${_cpp_out}")
  STRING(REPLACE ".xsd" "" _hpp_out "${_hpp_out}")
  SET(additional_xsd_args "")
  IF(_xsd_version_output VERSION_GREATER 3.9.0)
    IF(CMAKE_CXX_COMPILER_VERSION VERSION_GREATER 4.7.0)
      SET(additional_xsd_args --std c++11)
    ELSE()
      IF(WIN32 OR NOT CMAKE_COMPILER_IS_GNUCC)
        SET(additional_xsd_args --std c++11)
      ENDIF(WIN32 OR NOT CMAKE_COMPILER_IS_GNUCC)
    ENDIF()
  ENDIF()
  ADD_CUSTOM_COMMAND(OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/${dir}
                     COMMAND ${CMAKE_COMMAND}
                        ARGS -E make_directory ${CMAKE_CURRENT_BINARY_DIR}/${dir}
                     WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}
  )
  ADD_CUSTOM_COMMAND(OUTPUT ${_cpp_out} ${_hpp_out}
                     COMMAND ${XSD_COMPILER}
                        ARGS cxx-tree ${additional_xsd_args} --generate-serialization ${_xsd_in}
                     DEPENDS ${_xsd_in} ${CMAKE_CURRENT_BINARY_DIR}/${dir}
                     WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}/${dir}
  )
  LIST(APPEND ${srcList} ${_cpp_out} ${_hpp_out} ${infile})
 ENDMACRO(XSD_GENERATE_TREE srcList infile)
@@ -1,527 +0,0 @@
 INCLUDE(CMakeParseArguments)
 MACRO(_ADD_SERVICE_RESTART_FLAG svcName)
  STRING(TOUPPER ${svcName} _svcNameUpper)
  STRING(TOLOWER ${svcName} _svcNameLower)
  SET(_optionName DONTRESTARTSVC_${_svcNameUpper})
  OPTION(${_optionName} "Do not automatically restart Service ${_svcNameUpper} (build dir only)" OFF)
  SET(_fn "${CMAKE_BINARY_DIR}/share/Lts/xml/${_svcNameLower}.dontRestart")
  IF (${_optionName})
    FILE(WRITE ${_fn} "blub")
  ELSE()
    FILE(REMOVE ${_fn})
  ENDIF()
 ENDMACRO()
 MACRO(_GET_SERVICENAME xmlFile_in svcNameOut)
  GET_FILENAME_COMPONENT(xmlFile ${xmlFile_in} NAME_WE)
  SET(_idx -1)
  STRING(FIND "${xmlFile}" "_" _idx)
  STRING(SUBSTRING "${xmlFile}" 0 ${_idx} ${svcNameOut})
 ENDMACRO()
 MACRO(_CODEGEN_ACTION action srcList xmlIn in_files out_files)
  LIST(APPEND dependFiles ${ARGN} ${xmlIn} ${${in_files}})
  SET(_cg $<TARGET_FILE:ngl_codegen>)
  SET(_env "QT_PLUGIN_PATH=/usr/lib/x86_64-linux-gnu/qt6/plugins/kf6/ktexttemplate")
  ADD_CUSTOM_COMMAND(OUTPUT ${${out_files}}
                     COMMAND ${CMAKE_COMMAND} -E env ${_env} ${_cg}
                        ARGS -s ${xmlIn}
                             -a ${action}
                             -o ${CMAKE_CURRENT_BINARY_DIR}
                             -i ${CMAKE_BINARY_DIR}/service_idl_files.txt
                             ${${in_files}}
                     DEPENDS ${_cg} ${dependFiles}
                     WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
                     )
  LIST(APPEND ${srcList} ${${out_files}})
  GET_FILENAME_COMPONENT(_xml "${CMAKE_CURRENT_SOURCE_DIR}/${xmlIn}" ABSOLUTE)
  SET_PROPERTY(GLOBAL APPEND PROPERTY CODEGEN_IDL_FILES "${_xml}")
 ENDMACRO()
 MACRO(CODEGEN_DATABASE_STRUCTS srcList_h xmlFile_in)
  _GET_SERVICENAME( "${xmlFile_in}" svcNameOut )
  SET(in_files  "${CMAKE_SOURCE_DIR}/Lts/Common/CodeGen/svc_db_structs.cpp.grantlee"
                "${CMAKE_SOURCE_DIR}/Lts/Common/CodeGen/svc_db_structs.h.grantlee"
     )
  SET(out_files "${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_db_structs.cpp"
                "${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_db_structs.h"
     )
  _CODEGEN_ACTION("DATABASE" ${srcList_h} ${xmlFile_in} in_files out_files ${ARGN})
 ENDMACRO()
 MACRO(CODEGEN_DATABASE_SQL srcList xmlFile_in)
  _GET_SERVICENAME( "${xmlFile_in}" svcNameOut )
  SET(in_files  "${CMAKE_SOURCE_DIR}/Lts/Common/CodeGen/svc_db.h.grantlee"
                "${CMAKE_SOURCE_DIR}/Lts/Common/CodeGen/svc_db_impl.cpp.grantlee"
                "${CMAKE_SOURCE_DIR}/Lts/Common/CodeGen/svc_db_impl.h.grantlee"
     )
  SET(out_files "${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_db.h"
                "${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_db_impl.cpp"
                "${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_db_impl.h"
     )
  _CODEGEN_ACTION("DATABASE" ${srcList} ${xmlFile_in} in_files out_files ${ARGN})
  IF(NOT POLICY CMP0071)
    QT6_WRAP_CPP(${srcList} "${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_db.h"
                            "${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_db_impl.h")
  ENDIF()
 ENDMACRO()
 MACRO(CODEGEN_DAO srcList xmlFile_in)
  _GET_SERVICENAME( "${xmlFile_in}" svcNameOut )
  SET(in_files  "${CMAKE_SOURCE_DIR}/Lts/Common/CodeGen/svc_dao.cpp.grantlee"
                "${CMAKE_SOURCE_DIR}/Lts/Common/CodeGen/svc_dao.h.grantlee"
     )
  SET(out_files "${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_dao.cpp"
                "${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_dao.h"
     )
  _CODEGEN_ACTION("dao" ${srcList} ${xmlFile_in} in_files out_files ${ARGN})
  IF(NOT POLICY CMP0071)
    QT6_WRAP_CPP(${srcList} "${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_dao.cpp"
                            "${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_dao.h")
  ENDIF()
 ENDMACRO()
 MACRO(CODEGEN_DATABASE srcList xmlFile_in)
  _GET_SERVICENAME( "${xmlFile_in}" svcNameOut )
  SET(in_files  "${CMAKE_SOURCE_DIR}/Lts/Common/CodeGen/svc_db_structs.cpp.grantlee"
                "${CMAKE_SOURCE_DIR}/Lts/Common/CodeGen/svc_db_structs.h.grantlee"
                "${CMAKE_SOURCE_DIR}/Lts/Common/CodeGen/svc_db_impl.cpp.grantlee"
                "${CMAKE_SOURCE_DIR}/Lts/Common/CodeGen/svc_db_impl.h.grantlee"
                "${CMAKE_SOURCE_DIR}/Lts/Common/CodeGen/svc_db.h.grantlee"
     )
  SET(out_files "${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_db_structs.cpp"
                "${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_db_structs.h"
                "${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_db_impl.cpp"
                "${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_db_impl.h"
                "${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_db.h"
     )
  _CODEGEN_ACTION("DATABASE_SERVER" ${srcList} ${xmlFile_in} in_files out_files ${ARGN})
  IF(NOT POLICY CMP0071)
    QT6_WRAP_CPP(${srcList} "${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_db.h"
                            "${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_db_impl.h")
  ENDIF()
 ENDMACRO()
 MACRO(INSTALL_SHARED_FILES srcList)
  SET(options)
  SET(oneValueArgs DESTINATION)
  SET(multiValueArgs FILES)
  CMAKE_PARSE_ARGUMENTS(_ISF "${options}" "${oneValueArgs}" "${multiValueArgs}" ${ARGN})
  SET(build_out_dir  ${CMAKE_BINARY_DIR}/share/Lts/${_ISF_DESTINATION})
  SET(inst_out_dir   share/Lts/${_ISF_DESTINATION})
  FOREACH(filename ${_ISF_FILES})
    GET_FILENAME_COMPONENT(fn ${filename} NAME)
    SET(build_out_file ${build_out_dir}/${fn})
    SET(in_file        ${CMAKE_CURRENT_SOURCE_DIR}/${filename})
    ADD_CUSTOM_COMMAND(OUTPUT ${build_out_file}
                       COMMAND ${CMAKE_COMMAND}
                          ARGS -E make_directory ${build_out_dir}
                       COMMAND ${CMAKE_COMMAND}
                          ARGS -E copy_if_different ${in_file} ${build_out_file}
                       DEPENDS ${in_file}
                       )
    LIST(APPEND ${srcList} ${in_file} ${build_out_file})
  ENDFOREACH()
  NGL_INSTALL(${_ISF_UNPARSED_ARGUMENTS} FILES ${_ISF_FILES} DESTINATION ${inst_out_dir})
 ENDMACRO()
 MACRO(CODEGEN_SQL srcList xmlFile_in)
  _GET_SERVICENAME( "${xmlFile_in}" svcNameOut )
  SET(out_dir_sql  "${CMAKE_BINARY_DIR}/share/Lts/sql/")
  SET(out_file_sql "${out_dir_sql}/${svcNameOut}.sql")
  SET(action "SQL")
  SET(_cg $<TARGET_FILE:ngl_codegen>)
  ADD_CUSTOM_COMMAND(OUTPUT ${out_file_sql}
                     COMMAND ${CMAKE_COMMAND}
                     ARGS -E make_directory ${out_dir_sql}
                     COMMAND ${CMAKE_COMMAND} -E env QT_PLUGIN_PATH=/usr/lib/x86_64-linux-gnu/qt6/plugins/kf6/ktexttemplate ${_cg}
                        ARGS -s ${xmlFile_in}
                             -a ${action}
                             -o ${out_dir_sql}
                             -i ${CMAKE_BINARY_DIR}/service_idl_files.txt
                     DEPENDS ${_cg} ${xmlFile_in}
                     WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
                     )
  LIST(APPEND ${srcList} ${out_file_sql})
  NGL_INSTALL(SV AAR FILES ${out_file_sql} DESTINATION share/Lts/sql)
 ENDMACRO()
 MACRO(CODEGEN_HANDLE_SVC_XML srcList xmlFile_in)
  _GET_SERVICENAME( "${xmlFile_in}" svcNameOut )
  SET(out_dir_xml  "${CMAKE_BINARY_DIR}/share/Lts/xml/")
  SET(out_file_xml "${out_dir_xml}/${svcNameOut}.xml")
  ADD_CUSTOM_COMMAND(OUTPUT ${out_file_xml}
                     COMMAND ${CMAKE_COMMAND}
                       ARGS -E make_directory ${out_dir_xml}
                     COMMAND ${CMAKE_COMMAND}
                       ARGS -E copy_if_different ${xmlFile_in} ${out_file_xml}
                     DEPENDS ${xmlFile_in}
                     WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
                     )
  LIST(APPEND ${srcList} ${xmlFile_in} ${out_file_xml})
  _ADD_SERVICE_RESTART_FLAG(${svcNameOut})
  NGL_INSTALL(SV AAR FILES ${out_file_xml} DESTINATION share/Lts/xml)
 ENDMACRO()
 MACRO(CODEGEN_IDL_SVC srcList xmlFile_in)
  _GET_SERVICENAME( "${xmlFile_in}" svcNameOut )
  SET(out_files "${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}.idl"
                "${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_enums.idl"
                "${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_json.cpp"
                "${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_json.h"
                "${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_translation.cpp"
                "${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_translation.h")
  SET(in_files  "${CMAKE_SOURCE_DIR}/Lts/Common/CodeGen/svc.idl.grantlee"
                "${CMAKE_SOURCE_DIR}/Lts/Common/CodeGen/svc_enums.idl.grantlee"
                "${CMAKE_SOURCE_DIR}/Lts/Common/CodeGen/svc_json.cpp.grantlee"
                "${CMAKE_SOURCE_DIR}/Lts/Common/CodeGen/svc_json.h.grantlee"
                "${CMAKE_SOURCE_DIR}/Lts/Common/CodeGen/svc_translation.cpp.grantlee"
                "${CMAKE_SOURCE_DIR}/Lts/Common/CodeGen/svc_translation.h.grantlee"
                )
  SET(idl_out_files "${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}.idl"
                    "${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_enums.idl")
  SET_PROPERTY(GLOBAL APPEND PROPERTY CODEGEN_IDL_FILES "${idl_out_files}")
  SET_SOURCE_FILES_PROPERTIES(${idl_out_files} PROPERTIES HEADER_FILE_ONLY TRUE)
  _CODEGEN_ACTION("DDS_TOPICS" ${srcList} "${xmlFile_in}" in_files out_files ${ARGN})
  CODEGEN_HANDLE_SVC_XML(${srcList} ${xmlFile_in})
 ENDMACRO()
 # Use Python 3 (Python 2.7 not available on modern distributions like openSUSE Leap 16.0)
 FIND_PACKAGE(Python3 COMPONENTS Interpreter REQUIRED)
 SET(PYTHON_EXECUTABLE ${Python3_EXECUTABLE})
 MACRO(CODEGEN_TOPIC_TYPEDEFS srcList xmlFile_in)
  _GET_SERVICENAME( "${xmlFile_in}" svcNameOut )
  SET(inFile ${xmlFile_in})
  IF(NOT IS_ABSOLUTE ${inFile})
    SET(inFile ${CMAKE_CURRENT_SOURCE_DIR}/${inFile})
    IF(NOT EXISTS ${inFile})
      SET(inFile ${CMAKE_CURRENT_BINARY_DIR}/${inFile})
    ENDIF()
  ENDIF()
  SET(prog ${CMAKE_SOURCE_DIR}/Lts/Common/CodeGen/codegen_simple.py)
  SET(out_files "${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_dts_types.h"
                "${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_dtc_types.h"
                "${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_fts_types.h"
                "${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_ftc_types.h"
                "${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_operator_rights.h"
                "${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_operator_rights.cpp"
                "${CMAKE_BINARY_DIR}/share/Lts/sql/${svcNameOut}_operator_rights.sql"
  )
  ADD_CUSTOM_COMMAND( OUTPUT ${out_files}
                     COMMAND ${CMAKE_COMMAND}
                     ARGS -E make_directory ${CMAKE_CURRENT_BINARY_DIR}
                     COMMAND ${CMAKE_COMMAND}
                     ARGS -E make_directory ${CMAKE_BINARY_DIR}/share/Lts/sql/
                     COMMAND ${PYTHON_EXECUTABLE}
                        ARGS ${prog} ALL
                             ${inFile}
                             ${CMAKE_CURRENT_BINARY_DIR}
                     COMMAND ${PYTHON_EXECUTABLE}
                        ARGS ${prog} SQL
                             ${inFile}
                             ${CMAKE_BINARY_DIR}/share/Lts/sql
                     DEPENDS ${inFile}
                             ${prog}
                    )
  LIST(APPEND ${srcList} ${out_files})
  SET_PROPERTY(GLOBAL APPEND PROPERTY CODEGEN_XML_FILES "${inFile}")
 ENDMACRO()
 MACRO(CODEGEN_CLIENT_TOPICS_IFC srcList xmlFile_in)
  SET(options)
  SET(oneValueArgs)
  SET(multiValueArgs PARTS)
  CMAKE_PARSE_ARGUMENTS(_CST "${options}" "${oneValueArgs}" "${multiValueArgs}" ${ARGN})
  _GET_SERVICENAME( "${xmlFile_in}" svcNameOut )
  IF(NOT _CST_PARTS)
    SET(_CST_PARTS "DTC" "FTC")
  ENDIF()
  SET(in_files "")
  SET(out_files "")
  FOREACH(part ${_CST_PARTS})
    IF(part STREQUAL "DTC")
      LIST(APPEND in_files
            "${CMAKE_SOURCE_DIR}/Lts/Common/CodeGen/svc_dtc.h.grantlee"
            )
      LIST(APPEND out_files
            "${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_dtc.h"
            )
      IF(NOT POLICY CMP0071)
        QT6_WRAP_CPP(${srcList} "${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_dtc.h")
      ENDIF()
    ELSEIF(part STREQUAL "FTC")
      LIST(APPEND in_files
            "${CMAKE_SOURCE_DIR}/Lts/Common/CodeGen/svc_ftc.h.grantlee"
            )
      LIST(APPEND out_files
            "${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_ftc.h"
            )
      IF(NOT POLICY CMP0071)
        QT6_WRAP_CPP(${srcList} "${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_ftc.h")
      ENDIF()
    ELSE()
      MESSAGE(FATAL_ERROR "Unkown part argument for CODEGEN_SERVER_TOPICS (${part})")
    ENDIF()
  ENDFOREACH()
  _CODEGEN_ACTION("DDS_TOPICS" ${srcList} "${xmlFile_in}" in_files out_files)
 ENDMACRO()
 MACRO(CODEGEN_CLIENT_TOPICS_IMPL srcList xmlFile_in)
  SET(options)
  SET(oneValueArgs)
  SET(multiValueArgs PARTS)
  CMAKE_PARSE_ARGUMENTS(_CST "${options}" "${oneValueArgs}" "${multiValueArgs}" ${ARGN})
  _GET_SERVICENAME( "${xmlFile_in}" svcNameOut )
  IF(NOT _CST_PARTS)
    SET(_CST_PARTS "DTC" "FTC")
  ENDIF()
  SET(in_files "")
  SET(out_files "")
  FOREACH(part ${_CST_PARTS})
    IF(part STREQUAL "DTC")
      LIST(APPEND in_files
            "${CMAKE_SOURCE_DIR}/Lts/Common/CodeGen/svc_dtc_impl.h.grantlee"
            "${CMAKE_SOURCE_DIR}/Lts/Common/CodeGen/svc_dtc_impl.cpp.grantlee"
            )
      LIST(APPEND out_files
            "${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_dtc_impl.h"
            "${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_dtc_impl.cpp"
            )
      IF(NOT POLICY CMP0071)
        QT6_WRAP_CPP(${srcList} "${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_dtc_impl.h")
      ENDIF()
    ELSEIF(part STREQUAL "FTC")
      LIST(APPEND in_files
            "${CMAKE_SOURCE_DIR}/Lts/Common/CodeGen/svc_ftc_impl.h.grantlee"
            "${CMAKE_SOURCE_DIR}/Lts/Common/CodeGen/svc_ftc_impl.cpp.grantlee"
            )
      LIST(APPEND out_files
            "${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_ftc_impl.h"
            "${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_ftc_impl.cpp"
            )
      IF(NOT POLICY CMP0071)
        QT6_WRAP_CPP(${srcList} "${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_ftc_impl.h")
      ENDIF()
    ELSE()
      MESSAGE(FATAL_ERROR "Unkown part argument for CODEGEN_SERVER_TOPICS (${part})")
    ENDIF()
  ENDFOREACH()
  _CODEGEN_ACTION("DDS_TOPICS" ${srcList} "${xmlFile_in}" in_files out_files)
 ENDMACRO()
 MACRO(CODEGEN_SERVER_TOPICS srcList xmlFile_in)
  SET(options)
  SET(oneValueArgs)
  SET(multiValueArgs PARTS)
  CMAKE_PARSE_ARGUMENTS(_CST "${options}" "${oneValueArgs}" "${multiValueArgs}" ${ARGN})
  _GET_SERVICENAME( "${xmlFile_in}" svcNameOut )
  IF(NOT _CST_PARTS)
    SET(_CST_PARTS "DTS" "FTS")
  ENDIF()
  SET(in_files "")
  SET(out_files "")
  FOREACH(part ${_CST_PARTS})
    IF(part STREQUAL "DTS")
      LIST(APPEND in_files
            "${CMAKE_SOURCE_DIR}/Lts/Common/CodeGen/svc_dts.h.grantlee"
            "${CMAKE_SOURCE_DIR}/Lts/Common/CodeGen/svc_dts_impl.h.grantlee"
            "${CMAKE_SOURCE_DIR}/Lts/Common/CodeGen/svc_dts_impl.cpp.grantlee"
            )
      LIST(APPEND out_files
            "${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_dts.h"
            "${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_dts_impl.h"
            "${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_dts_impl.cpp"
            )
    ELSEIF(part STREQUAL "FTS")
      LIST(APPEND in_files
            "${CMAKE_SOURCE_DIR}/Lts/Common/CodeGen/svc_fts.h.grantlee"
            "${CMAKE_SOURCE_DIR}/Lts/Common/CodeGen/svc_fts_impl.h.grantlee"
            "${CMAKE_SOURCE_DIR}/Lts/Common/CodeGen/svc_fts_impl.cpp.grantlee"
            )
      LIST(APPEND out_files
            "${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_fts.h"
            "${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_fts_impl.h"
            "${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_fts_impl.cpp"
            )
      IF(NOT POLICY CMP0071)
        QT6_WRAP_CPP(${srcList} ${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_fts_impl.h)
      ENDIF()
    ELSE()
      MESSAGE(FATAL_ERROR "Unkown part argument for CODEGEN_SERVER_TOPICS (${part})")
    ENDIF()
  ENDFOREACH()
  _CODEGEN_ACTION("DDS_TOPICS" ${srcList} "${xmlFile_in}" in_files out_files)
 ENDMACRO()
 MACRO(CODEGEN_TOPIC_TYPE_PLUGIN srcList xmlFile_in)
  _GET_SERVICENAME( "${xmlFile_in}" svcNameOut )
  SET(in_files  "${CMAKE_SOURCE_DIR}/Lts/Common/CodeGen/svc_topic_type_plugin.cpp.grantlee"
                "${CMAKE_SOURCE_DIR}/Lts/Common/CodeGen/svc_topic_type_plugin.h.grantlee"
    )
  SET(out_files "${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_topic_type_plugin.cpp"
                "${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_topic_type_plugin.h"
    )
  _CODEGEN_ACTION("DDS_TOPICS" ${srcList} "${xmlFile_in}" in_files out_files)
  IF(NOT POLICY CMP0071)
    QT6_WRAP_CPP(${srcList} ${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_topic_type_plugin.h)
  ENDIF()
 ENDMACRO()
 MACRO(CREATE_TOPIC_TYPE_PLUGIN xmlFile_in)
  SET(_my_srcs "")
  _GET_SERVICENAME( "${xmlFile_in}" svcNameOut )
  CODEGEN_TOPIC_TYPE_PLUGIN(_my_srcs ${xmlFile_in})
  STRING(SUBSTRING ${svcNameOut} 0 1 _ss1)
  STRING(SUBSTRING ${svcNameOut} 1 -1 _ss2)
  STRING(TOUPPER ${_ss1} _ss1)
  SET(_commonLib "svc${_ss1}${_ss2}Common")
  IF(svcNameOut STREQUAL "core")
    SET(_commonLib ddscore)
  ENDIF()
  NGL_ADD_LIBRARY(WS AAR SV NO_TRANSLATION ${svcNameOut}TopicTypePlugin MODULE
    ${_my_srcs}
  )
  NGL_TARGET_LINK_LIBRARIES(${svcNameOut}TopicTypePlugin
    topic_type_plugin
    routing_plugin
    ddscore
    ddsftccore
    # The generated *_topic_type_plugin.cpp includes generic_fts_impl.h
    # -> generic_fts_internal.h -> "ddsfts_export.h". Linking ddsfts also
    # propagates its exported include dirs (source and binary dir).
    ddsfts
    ${_commonLib}
  )
  NGL_INSTALL_TARGET(${svcNameOut}TopicTypePlugin)
 ENDMACRO()
 MACRO(CODEGEN_RECORD_REPLAY_PLUGIN srcList xmlFile_in)
  _GET_SERVICENAME( "${xmlFile_in}" svcNameOut )
  SET(in_files  "${CMAKE_SOURCE_DIR}/Lts/Common/CodeGen/svc_record_replay_plugin.cpp.grantlee"
                "${CMAKE_SOURCE_DIR}/Lts/Common/CodeGen/svc_record_replay_plugin.h.grantlee"
    )
  SET(out_files "${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_record_replay_plugin.cpp"
                "${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_record_replay_plugin.h"
    )
  _CODEGEN_ACTION("DDS_TOPICS" ${srcList} "${xmlFile_in}" in_files out_files)
  IF(NOT POLICY CMP0071)
    QT6_WRAP_CPP(${srcList} ${CMAKE_CURRENT_BINARY_DIR}/${svcNameOut}_record_replay_plugin.h)
  ENDIF()
 ENDMACRO()
 MACRO(CREATE_RECORD_REPLAY_PLUGIN_INTERN xmlFile_in svcSourceList libtype)
  SET(_my_srcs "")
  _GET_SERVICENAME( "${xmlFile_in}" svcNameOut )
  CODEGEN_RECORD_REPLAY_PLUGIN(_my_srcs ${xmlFile_in})
  STRING(SUBSTRING ${svcNameOut} 0 1 _ss1)
  STRING(SUBSTRING ${svcNameOut} 1 -1 _ss2)
  STRING(TOUPPER ${_ss1} _ss1)
  SET(_commonLib "svc${_ss1}${_ss2}Common")
  IF(svcNameOut STREQUAL "core")
    SET(_commonLib ddscore)
  ENDIF()
  LIST(APPEND ${svcSourceList} ${_my_srcs})
  NGL_ADD_LIBRARY(SV AAR WS ${svcNameOut}RecordReplayPlugin ${libtype}
    ${_my_srcs}
  )
  NGL_TARGET_LINK_LIBRARIES(${svcNameOut}RecordReplayPlugin
    RecordReplayPlugin
    ddscore
    ddsconnector
    ddsdtc
    ngldb
    LtsUtilsCore
    ${_commonLib}
  )
  NGL_INSTALL_TARGET(${svcNameOut}RecordReplayPlugin)
  NGL_TARGET_INCLUDE_DIRECTORIES(${svcNameOut}RecordReplayPlugin
    PUBLIC
      ${CMAKE_CURRENT_SOURCE_DIR}/../
      ${CMAKE_CURRENT_BINARY_DIR}/../
  )
 ENDMACRO()
 MACRO(CREATE_RECORD_REPLAY_PLUGIN xmlFile_in svcSourceList)
  CREATE_RECORD_REPLAY_PLUGIN_INTERN(${xmlFile_in} ${svcSourceList} MODULE)
 ENDMACRO()
 MACRO(CREATE_RECORD_REPLAY_PLUGIN_SHARED xmlFile_in)
  CREATE_RECORD_REPLAY_PLUGIN_INTERN(${xmlFile_in} _unused SHARED)
 ENDMACRO()
 MACRO(CODEGEN_WRITE_SERVICEFILE_INFO)
  GET_PROPERTY(idl_files GLOBAL PROPERTY CODEGEN_IDL_FILES)
  LIST(REMOVE_DUPLICATES idl_files)
  FILE(WRITE ${CMAKE_BINARY_DIR}/service_idl_files.txt "-- all available service idl files\n")
  FOREACH(idl_file ${idl_files})
    FILE(APPEND ${CMAKE_BINARY_DIR}/service_idl_files.txt "${idl_file}\n")
  ENDFOREACH()
 ENDMACRO()
@@ -1,77 +0,0 @@
 MACRO(RTIDDSGEN srcList infile)
  # RTI (DDS) code generation is optional during migration; if RTI is not found, skip code generation.
  FIND_PACKAGE(RTI)
  if (NOT RTI_FOUND)
    message(STATUS "RTI not found; skipping RTI IDL code generation for ${infile}")
    return()
  endif()
  SET(input ${infile})
  IF(NOT IS_ABSOLUTE ${input})
    SET(input "${CMAKE_CURRENT_BINARY_DIR}/${input}")
  ENDIF()
  GET_FILENAME_COMPONENT(output  ${infile} NAME_WE)
  GET_FILENAME_COMPONENT(input   ${input} ABSOLUTE)
  SET(_ddsgen_args "")
  SET(output_cxx
    ${CMAKE_CURRENT_BINARY_DIR}/${output}.cxx
    ${CMAKE_CURRENT_BINARY_DIR}/${output}Plugin.cxx
  )
  SET(output_hpp
    ${CMAKE_CURRENT_BINARY_DIR}/${output}.hpp
    ${CMAKE_CURRENT_BINARY_DIR}/${output}Plugin.hpp
  )
  ADD_CUSTOM_COMMAND(OUTPUT ${output_cxx} ${output_hpp}
                     COMMAND ${CMAKE_COMMAND}
                     ARGS -E remove ${output_cxx}
                     COMMAND ${RTI_DDSGEN_EXECUTABLE}
                     ARGS -language "C++11"
                     ARGS -unboundedSupport
                     ARGS -verbosity 2
                     ARGS -update typefiles
                     ARGS -stl
                     ARGS -d ${CMAKE_CURRENT_BINARY_DIR}
                     ARGS -inputIdl ${input}
                     ARGS -I ${CMAKE_CURRENT_BINARY_DIR}
                     ARGS -I ${CMAKE_CURRENT_BINARY_DIR}/../
                     ARGS -I ${CMAKE_CURRENT_BINARY_DIR}/../../
                     ARGS -I ${CMAKE_CURRENT_SOURCE_DIR}
                     ARGS -I ${CMAKE_CURRENT_SOURCE_DIR}/../
                     ARGS -I ${CMAKE_CURRENT_SOURCE_DIR}/../../
                     WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
                     DEPENDS ${input} ${ARGN}
                     )
  IF(WIN32)
    SET_SOURCE_FILES_PROPERTIES(${output_cxx} PROPERTIES COMPILE_FLAGS "-DNDDS_USER_DLL_EXPORT")
  ELSE()
    SET_SOURCE_FILES_PROPERTIES(${output_cxx} PROPERTIES SKIP_UNITY_BUILD_INCLUSION TRUE)
  ENDIF()
  LIST(APPEND ${srcList} ${output_cxx} ${output_hpp})
 ENDMACRO()
@@ -38,11 +38,20 @@ if(POLICY CMP0177)
  cmake_policy(SET CMP0177 OLD)
 endif()
-# Compatibility stubs for Qt5 CMake macros when Qt6 is used.
+# Compatibility stubs for Qt5 CMake macros when Qt6 is used (UI/CPP wrapping
-# These stubs allow configure to succeed; actual resource/ui generation should be addressed during source migration.
+# still no-op; resource handling is implemented below).
 # QT5_ADD_RESOURCES maps onto Qt6's qt6_add_resources() in the outfiles-variable
 # form: the generated qrc_<name>.cpp sources are appended to the given source
 # list, so .qrc files are compiled into the targets that reference them
 # (e.g. TetraIF/LogView). Without this the resources are silently dropped and
 # ":/..." icons render empty at runtime.
 if(NOT COMMAND QT5_ADD_RESOURCES)
  macro(QT5_ADD_RESOURCES _out)
-    set(${_out} "" PARENT_SCOPE)
+    if(TARGET Qt6::Core)
      qt6_add_resources(${_out} ${ARGN})
    else()
      message(WARNING "QT5_ADD_RESOURCES stub: Qt6::Core not found, skipping resources: ${ARGN}")
    endif()
  endmacro()
 endif()
 if(NOT COMMAND QT5_ADD_BIG_RESOURCES)
@@ -1,30 +0,0 @@
 # Placeholder internal targets to allow partial configure during migration
 # Creates IMPORTED targets for internal DDS generator targets that are not
 # yet available in the repository. These placeholders allow CMake checks
 # like "if(TARGET ddsgen)" to behave consistently and let subdirs add
 # tests during migration. They should be removed/replaced when real
 # targets are added during module migration.
 if(NOT TARGET ddsgen)
  add_library(ddsgen UNKNOWN IMPORTED)
  # Qt6 Migration: Removed INTERFACE_POSITION_INDEPENDENT_CODE - conflicts with Qt6 reduce_relocations
  # set_target_properties(ddsgen PROPERTIES INTERFACE_POSITION_INDEPENDENT_CODE ON)
 endif()
 if(NOT TARGET ddsdtc)
  add_library(ddsdtc UNKNOWN IMPORTED)
  # Qt6 Migration: Removed INTERFACE_POSITION_INDEPENDENT_CODE - conflicts with Qt6 reduce_relocations
  # set_target_properties(ddsdtc PROPERTIES INTERFACE_POSITION_INDEPENDENT_CODE ON)
 endif()
 if(NOT TARGET ddsfts)
  add_library(ddsfts UNKNOWN IMPORTED)
  # Qt6 Migration: Removed INTERFACE_POSITION_INDEPENDENT_CODE - conflicts with Qt6 reduce_relocations
  # set_target_properties(ddsfts PROPERTIES INTERFACE_POSITION_INDEPENDENT_CODE ON)
 endif()
 if(NOT TARGET ddsQoS)
  add_library(ddsQoS UNKNOWN IMPORTED)
  # Qt6 Migration: Removed INTERFACE_POSITION_INDEPENDENT_CODE - conflicts with Qt6 reduce_relocations
  # set_target_properties(ddsQoS PROPERTIES INTERFACE_POSITION_INDEPENDENT_CODE ON)
 endif()
@@ -1,121 +1,27 @@
-// Release pipeline for the Qt6-migrated legatus validation-scope branch
+// Entry point of the release pipeline for the Qt6-migrated legatus
-// (story/release-validation-scope): TetraIF, Z, Lts/Common (+
+// validation-scope branch (story/release-validation-scope).
 // Lts/Proxies/TrainingAreaBase) -> 5 release DEB packages.
 //
-// Workspace layout (checked out by Jenkins, outer pipeline repo):
+// Lives in jenkins-ci-rme/ of the DLBO Qt6 repo. Declares the job properties,
-//   <WORKSPACE>/
+// allocates the build node, checks out the repo with its submodules and
-//     external/
+// loads the build body from jenkins-ci-rme/jenkins/Jenkinsfile.
 //     qt-migration-legatus/qt6-after/qt6-migrated-legatus/   <- LEGATUS_ROOT
 //       Dockerfile                     (prebuilt build image recipe)
 //       new_docker_build.sh            (local build driver)
 //       rpmbuild/make_rpm_ubuntu26.py  (in-tree packaging)
 //       jenkins-ci-rme/                (this pipeline)
 //
 // The build container image is the prebuilt image built from the in-tree
 // Dockerfile; it is built on the agent when not present (RebuildImage
 // forces a fresh build).
 def project = 'guez'
 def legatusRoot = 'qt-migration-legatus/qt6-after/qt6-migrated-legatus'
 def imageName = 'legatus-qt6-prebuilt:latest'
 properties([
    disableConcurrentBuilds(),
    parameters([
-        string(name: 'OsVersions', defaultValue: '26.04', description: 'Comma-separated Ubuntu base versions, all built in parallel'),
+        choice(name: 'ProjectName', choices: ['guez'], description: 'LTS project flavor (passed to make_rpm_ubuntu26.py --project_name)'),
        string(name: 'OsVersions', defaultValue: '26.04', description: 'Comma-separated Ubuntu base versions, built sequentially'),
        string(name: 'LtsVersion', defaultValue: '1.0', description: 'LTS version (major.minor) passed to make_rpm_ubuntu26.py --version'),
-        booleanParam(name: 'ClearWorkspace', defaultValue: false, description: 'Clear entire workspace on all nodes used for build'),
+        booleanParam(name: 'ClearWorkspace', defaultValue: false, description: 'Clear entire workspace used for build'),
        booleanParam(name: 'PublishArtifactRepo', defaultValue: true, description: 'Upload produced DEBs to the internal artifact repository'),
-        booleanParam(name: 'RebuildImage', defaultValue: false, description: 'Rebuild the prebuilt build image from the in-tree Dockerfile (default: reuse when present)')
+        booleanParam(name: 'RunCoverage', defaultValue: true, description: 'Build the release scope with -O0 --coverage, run ctest, collect the lcov report and archive it')
    ])
 ])
-env.GIT_TERMINAL_PROMPT = '0'
+node('jenkins-linux-node-2.sl.defence-elec.de') {
-env.LTS_VERSION = "${params.LtsVersion}"
+    stage('Init submodule') {
 env.ARTIFACTREPO = 'https://internal-repo.sl.defence-elec.de'
 // OS versions this build covers; every build is isolated under
 // rpms/${project}/${osVersion} so concurrent OS builds never collide.
 def osVersions = params.OsVersions.split(',').collect { it.trim() }.findAll { it }
 def builds = [:]
 osVersions.each { osVersion ->
    def rpmsDir = "rpms/${project}/${osVersion}"
    builds["${project} (${osVersion})"] = {
        stage("Prepare ${project} (${osVersion})") {
            sh "rm -rf ${rpmsDir}"
            sh "mkdir -p ${rpmsDir}"
        }
        stage("Prepare build image ${project} (${osVersion})") {
            if (params.RebuildImage) {
                sh "docker rmi ${imageName} || true"
            }
            // The in-tree driver owns the Dockerfile build args (APT_PACKAGES,
            // QT_VERSION, ...) - single source of truth.
            sh """
                if docker image inspect ${imageName} >/dev/null 2>&1; then
                    echo "Reusing existing prebuilt image ${imageName}"
                else
                    echo "Building prebuilt image ${imageName} from the in-tree Dockerfile..."
                    cd ${legatusRoot} && bash ./new_docker_build.sh --build-prebuilt-image --docker-image ${imageName}
                fi
            """
        }
        stage("Build DEB ${project} (${osVersion})") {
            def buildContainer = docker.image("${imageName}")
            def guezMode = (project == 'guez') ? 'ON' : 'OFF'
            def dockerOpts = "--init --shm-size=2g" +
                             " -v ${WORKSPACE}:/workspace" +
                             " -e WORKSPACE=/workspace" +
                             " -e PROJECT_BASE_DIR=/workspace" +
                             " -e PROJECT=${project}" +
                             " -e OS_VERSION=${osVersion}" +
                             " -e LTS_VERSION=${LTS_VERSION}" +
                             " -e GUEZ_MODE=${guezMode}" +
                             " -e BUILD_NUMBER=${env.BUILD_NUMBER}" +
                             " -e BUILD_TAG=${env.BUILD_TAG}"
            buildContainer.inside(dockerOpts) {
                sh "bash /workspace/${legatusRoot}/jenkins-ci-rme/jenkins_builder_ubuntu26.sh"
            }
        }
        stage("Publish ${project} (${osVersion})") {
            if (params.PublishArtifactRepo) {
                withCredentials([usernamePassword(credentialsId: 'internal-repo-uploader',
                                                  usernameVariable: 'CURL_USER',
                                                  passwordVariable: 'CURL_PASS')]) {
                    sh """
                        export CURL_CRED="\${CURL_USER}:\${CURL_PASS}"
                        export PROJECT='${project}'
                        export OS_VERSION='${osVersion}'
                        export LTS_VERSION='${LTS_VERSION}'
                        export BUILD_NUMBER='${env.BUILD_NUMBER}'
                        export ARTIFACTREPO='${env.ARTIFACTREPO}'
                        export ARTIFACTFOLDER='${project}'
                        bash ${legatusRoot}/jenkins-ci-rme/jenkins_publisher_ubuntu26.sh
                    """
                }
                def tdsUrl     = readFile("url-${project}-${osVersion}.txt").trim()
                def tdsVersion = readFile("tdsversion-${project}-${osVersion}.txt").trim()
                def link = """<a href="${tdsUrl}" target="_blank">${project} ${tdsVersion} (OS ${osVersion})</a>"""
                currentBuild.description = currentBuild.description ? "${currentBuild.description}<br/>${link}" : link
            } else {
                echo "Artifact-repo publish skipped for ${project} (OS ${osVersion}, PublishArtifactRepo=false)"
            }
        }
    }
 }
 try {
    stage("Initialization") {
        if (params.ClearWorkspace) {
            cleanWs()
        }
        checkout([
            $class: 'GitSCM',
            branches: scm.branches,
@@ -124,17 +30,5 @@ try {
            userRemoteConfigs: scm.userRemoteConfigs
        ])
    }
-        echo "Legatus Qt6 release build initialized — branch '${env.BRANCH_NAME}', project: ${project}, LTS ${env.LTS_VERSION}, OS version(s): ${osVersions.join(', ')}"
+    load 'jenkins-ci-rme/jenkins/Jenkinsfile'
    }
    parallel builds
    stage("Finalization") {
        echo "Legatus Qt6 release build completed — project: ${project} (LTS ${env.LTS_VERSION}), OS version(s): ${osVersions.join(', ')}"
    }
    currentBuild.result = 'SUCCESS'
 } catch (e) {
    currentBuild.result = 'FAILURE'
    throw e
 }
@@ -5,7 +5,8 @@ only on files inside this source tree:
 | File | Purpose |
 |---|---|
-| `Jenkinsfile` | Jenkins pipeline: prepare the prebuilt image (in-tree `Dockerfile`), run the builder inside the container, publish the DEBs to the artifact repo |
+| `Jenkinsfile` | Jenkins entry point (job script path `jenkins-ci-rme/Jenkinsfile`): job properties/parameters, build node, checkout with submodules, then `load`s `jenkins-ci-rme/jenkins/Jenkinsfile` |
 | `jenkins/Jenkinsfile` | Build body (per OS version, sequentially): install the prebuilt image from `legatus-qt6_1.0.tar.gz` when missing, run the builder inside the container, coverage, publish the DEBs to the artifact repo |
 | `jenkins_builder_ubuntu26.sh` | Runs **inside** the build container: stages the workspace, runs the in-tree `rpmbuild/make_rpm_ubuntu26.py`, copies the DEBs to the packages-out mount |
 | `jenkins_publisher_ubuntu26.sh` | Runs on the Jenkins agent: uploads the DEBs from `${WORKSPACE}/rpms/${PROJECT}/${OS_VERSION}/` to the internal artifact repository |
 | `release-16-10-2026.sh` | Local driver: the same flow without Jenkins, through the in-tree `new_docker_build.sh` |
@@ -24,9 +25,9 @@ only on files inside this source tree:
 - Packaging uses the **in-tree** `rpmbuild/make_rpm_ubuntu26.py`
  (was `${WORKSPACE}/rpmbuild` from the outer repo)
- The prebuilt build image is built from the **in-tree** `Dockerfile` via
+- The prebuilt build image `legatus-qt6:1.0` ships in the repo as
-  `new_docker_build.sh --build-prebuilt-image` (was a pre-pulled harbor
+  `legatus-qt6_1.0.tar.gz` (repo root); Jenkins `docker load`s it only when
-  image) — build args stay in `new_docker_build.sh` (single source of truth)
+  the image is not installed on the agent yet, and never builds it
 - `MIGRATE_PIPELINE_ROOT` is no longer needed: `new_docker_build.sh`
  derives it from its own location
 - DEB output path: `${WORKSPACE}/rpms/${PROJECT}/${OS_VERSION}/` (Jenkins
@@ -40,15 +41,14 @@ only on files inside this source tree:
 ## Local run
 ```bash
-cd qt6-migrated-legatus
+cd "DLBO Qt6"
 bash ./jenkins-ci-rme/release-16-10-2026.sh
-# DEBs: <pipeline-root>/rpms/guez/26.04/
+# DEBs: <repo-root>/rpms/guez/26.04/
 ```
 ## Jenkins setup
-The job SCM must be the outer pipeline repository (the Jenkinsfile lives in
+The job SCM is the DLBO Qt6 repository; the script path is
-the `qt-migration-legatus` submodule; point the job's script path at
+`jenkins-ci-rme/Jenkinsfile`, which loads `jenkins-ci-rme/jenkins/Jenkinsfile`.
 `qt-migration-legatus/qt6-after/qt6-migrated-legatus/jenkins-ci-rme/Jenkinsfile`).
 Required Jenkins credential: `internal-repo-uploader` (username/password for
 the artifact repository).
@@ -0,0 +1,135 @@
 // Build body of the release pipeline for the Qt6-migrated legatus
 // validation-scope branch (story/release-validation-scope): TetraIF, Z,
 // Lts/Common (+ Lts/Proxies/TrainingAreaBase) -> 5 release DEB packages.
 //
 // Loaded by jenkins-ci-rme/Jenkinsfile inside the allocated node after the
 // checkout; job properties/parameters live there.
 //
 // Workspace layout (checked out by Jenkins, DLBO Qt6 repo):
 //   <WORKSPACE>/
 //     jenkins-ci-rme/Jenkinsfile     (entry point)
 //     new_docker_build.sh            (local build driver)
 //     rpmbuild/make_rpm_ubuntu26.py  (in-tree packaging)
 //     jenkins-ci-rme/                (this pipeline)
 //
 // The build container image is the prebuilt image shipped in the repo as
 // legatus-qt6_1.0.tar.gz; it is loaded onto the agent when not installed
 // yet, never built here.
 def project = params.ProjectName
 def imageName = 'legatus-qt6:1.0'
 def imageArchive = 'legatus-qt6_1.0.tar.gz'
 env.GIT_TERMINAL_PROMPT = '0'
 env.LTS_VERSION = "${params.LtsVersion}"
 env.ARTIFACTREPO = 'https://internal-repo.sl.defence-elec.de'
 // OS versions this build covers, built one after another (the builder
 // stages the workspace into a shared deb_stage directory); output is
 // still isolated under rpms/${project}/${osVersion}.
 def osVersions = params.OsVersions.split(',').collect { it.trim() }.findAll { it }
 def buildOsVersion = { String osVersion ->
    def rpmsDir = "rpms/${project}/${osVersion}"
    stage("Prepare ${project} (${osVersion})") {
        sh "rm -rf ${rpmsDir}"
        sh "mkdir -p ${rpmsDir}"
    }
    stage("Build DEB ${project} (${osVersion})") {
        def buildContainer = docker.image("${imageName}")
        def guezMode = (project == 'guez') ? 'ON' : 'OFF'
        def dockerOpts = "--init --shm-size=2g" +
                         " -v ${WORKSPACE}:/workspace" +
                         " -e WORKSPACE=/workspace" +
                         " -e PROJECT_BASE_DIR=/workspace" +
                         " -e PROJECT=${project}" +
                         " -e OS_VERSION=${osVersion}" +
                         " -e LTS_VERSION=${LTS_VERSION}" +
                         " -e GUEZ_MODE=${guezMode}" +
                         " -e BUILD_NUMBER=${env.BUILD_NUMBER}" +
                         " -e BUILD_TAG=${env.BUILD_TAG}"
        buildContainer.inside(dockerOpts) {
            sh "bash /workspace/jenkins-ci-rme/jenkins_builder_ubuntu26.sh"
        }
    }
    stage("Coverage ${project} (${osVersion})") {
        if (!params.RunCoverage) {
            echo "Coverage skipped for ${project} (OS ${osVersion}, RunCoverage=false)"
            return
        }
        // The driver (run on the agent, same pattern as the image-build
        // stage) builds the scope with -O0 --coverage, runs ctest and
        // collects the lcov report into the workspace mount.
        sh "bash ./new_docker_build.sh --docker-image ${imageName} --run-coverage --coverage-output-dir ${WORKSPACE}/coverage/${project}/${osVersion}"
        archiveArtifacts artifacts: "coverage/${project}/${osVersion}/**", allowEmptyArchive: true
    }
    stage("Publish ${project} (${osVersion})") {
        if (params.PublishArtifactRepo) {
            withCredentials([usernamePassword(credentialsId: 'internal-repo-uploader',
                                              usernameVariable: 'CURL_USER',
                                              passwordVariable: 'CURL_PASS')]) {
                sh """
                    export CURL_CRED="\${CURL_USER}:\${CURL_PASS}"
                    export PROJECT='${project}'
                    export OS_VERSION='${osVersion}'
                    export LTS_VERSION='${LTS_VERSION}'
                    export BUILD_NUMBER='${env.BUILD_NUMBER}'
                    export ARTIFACTREPO='${env.ARTIFACTREPO}'
                    export ARTIFACTFOLDER='${project}'
                    bash jenkins-ci-rme/jenkins_publisher_ubuntu26.sh
                """
            }
            def tdsUrl     = readFile("url-${project}-${osVersion}.txt").trim()
            def tdsVersion = readFile("tdsversion-${project}-${osVersion}.txt").trim()
            def link = """<a href="${tdsUrl}" target="_blank">${project} ${tdsVersion} (OS ${osVersion})</a>"""
            currentBuild.description = currentBuild.description ? "${currentBuild.description}<br/>${link}" : link
        } else {
            echo "Artifact-repo publish skipped for ${project} (OS ${osVersion}, PublishArtifactRepo=false)"
        }
    }
 }
 try {
    stage("Initialization") {
        echo "Legatus Qt6 release build initialized — branch '${env.BRANCH_NAME}', project: ${project}, LTS ${env.LTS_VERSION}, OS version(s): ${osVersions.join(', ')}"
    }
    stage("Install build image") {
        // Reuse the prebuilt image when it is already installed on the agent;
        // otherwise load it from the archive shipped in the repo.
        def imageInstalled = sh(script: "docker image inspect '${imageName}' >/dev/null 2>&1", returnStatus: true) == 0
        if (imageInstalled) {
            echo "Build image ${imageName} is already installed on the agent - reusing it"
        } else {
            if (!fileExists(imageArchive)) {
                error "Build image ${imageName} not installed and image archive ${imageArchive} not found in the workspace"
            }
            echo "Build image ${imageName} not installed on the agent - loading it from ${imageArchive}"
            sh "docker load -i '${imageArchive}'"
            if (sh(script: "docker image inspect '${imageName}' >/dev/null 2>&1", returnStatus: true) != 0) {
                error "Build image ${imageName} still not available after loading ${imageArchive}"
            }
            echo "Build image ${imageName} installed on the agent"
        }
    }
    for (osVersion in osVersions) {
        buildOsVersion(osVersion)
    }
    stage("Finalization") {
        echo "Legatus Qt6 release build completed — project: ${project} (LTS ${env.LTS_VERSION}), OS version(s): ${osVersions.join(', ')}"
    }
    currentBuild.result = 'SUCCESS'
 } catch (e) {
    currentBuild.result = 'FAILURE'
    throw e
 }
@@ -7,7 +7,7 @@
 # Runs inside the prebuilt build container (built from the in-tree
 # Dockerfile) with the pipeline workspace mounted at /workspace.
 # Packaging is done by the IN-TREE rpmbuild copy
-# (qt-migration-legatus/qt6-after/qt6-migrated-legatus/rpmbuild/), so the
+# (rpmbuild/ at the DLBO Qt6 repo root), so the
 # release flow needs no files outside the source tree.
 #
 # Required environment (set by the Jenkinsfile or `docker run -e ...`):
@@ -41,13 +41,14 @@ rm -rf "${STAGE_DIR}"
 mkdir -p "${STAGE_DIR}"
 tar --exclude='./rpms' --exclude='./.git' --exclude='./build' \
    --exclude='./deb_build_tmp' --exclude='./deb_stage' --exclude='./packages-out' \
    --exclude='./legatus-qt6_1.0.tar.gz' \
    -cf - -C "${WORKSPACE}" . | tar -xf - -C "${STAGE_DIR}"
 export VERSION_DATE
 VERSION_DATE=$(date +%Y-%m-%d)
-# Real CMake project root inside the staged tree (the in-tree source)
+# CMake project root inside the staged tree (the DLBO Qt6 repo root)
-SOURCE_DIR="${STAGE_DIR}/qt-migration-legatus/qt6-after/qt6-migrated-legatus"
+SOURCE_DIR="${STAGE_DIR}"
 if [ ! -f "${SOURCE_DIR}/CMakeLists.txt" ] || [ ! -f "${SOURCE_DIR}/rpmbuild/make_rpm_ubuntu26.py" ]; then
    echo "ERROR: staged source incomplete under ${SOURCE_DIR} (CMakeLists.txt or rpmbuild/make_rpm_ubuntu26.py missing)" >&2
    exit 1
@@ -8,6 +8,8 @@
 #     image is not present yet
 #   - builds the release scope, runs ctest and produces the release DEB
 #     packages with the in-tree rpmbuild script
 #   - collects the lcov code-coverage report (--run-coverage; set
 #     DRYRUN_COVERAGE=OFF to skip)
 #
 # The DEB packages land in ${WORKSPACE}/rpms/${PROJECT}/${OS_VERSION}/
 # (Jenkins-style layout; locally WORKSPACE is the pipeline root).
@@ -16,7 +18,7 @@ set -euo pipefail
 SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
 LEGATUS_ROOT="$(cd "${SCRIPT_DIR}/.." && pwd)"
-PIPELINE_ROOT="$(cd "${LEGATUS_ROOT}/../../.." && pwd)"
+PIPELINE_ROOT="${LEGATUS_ROOT}"
 # Release build configuration (Jenkins-style variables)
 export WORKSPACE="${PIPELINE_ROOT}"
@@ -27,7 +29,7 @@ export GUEZ_MODE="${GUEZ_MODE:-ON}"
 export BUILD_NUMBER="${BUILD_NUMBER:-$(date +%Y%m%d-%H%M%S)}"
 export BUILD_TAG="${BUILD_TAG:-release-qt6-first}"
-DOCKER_IMAGE="${DOCKER_IMAGE:-legatus-qt6-prebuilt:latest}"
+DOCKER_IMAGE="${DOCKER_IMAGE:-legatus-qt6:1.0}"
 log_info() {
  printf 'INFO: %s\n' "$*"
@@ -60,4 +62,16 @@ bash ./new_docker_build.sh \
  --build-number "${BUILD_NUMBER}" \
  --build-tag "${BUILD_TAG}"
 # Code coverage (lcov) - mirrors the Jenkins Coverage stage. Set
 # DRYRUN_COVERAGE=OFF for a fast local DEB-only run.
 DRYRUN_COVERAGE="${DRYRUN_COVERAGE:-ON}"
 if [[ "${DRYRUN_COVERAGE}" == "ON" ]]; then
  bash ./new_docker_build.sh \
    --docker-image "${DOCKER_IMAGE}" \
    --run-coverage \
    --coverage-output-dir "${WORKSPACE}/coverage/${PROJECT}/${OS_VERSION}"
 else
  log_info "Coverage skipped (DRYRUN_COVERAGE=OFF)"
 fi
 log_info "=== Release Pipeline Complete ==="
@@ -9,7 +9,7 @@ set -euo pipefail
 # optionally runs the Jenkins builder to produce the release DEB packages.
 #
 # - Resolves MIGRATE_PIPELINE_ROOT (exported variable, .envrc, or derived
-#   from the script location) for the workspace and external mounts
+#   from the script location = repo root) for the workspace mount
 # - Uses a prebuilt Docker image with all build dependencies installed
 #   (build it from ./Dockerfile via --build-prebuilt-image)
 # - Optional deletion of the prebuilt Docker image via --delete-prebuilt-image
@@ -28,7 +28,7 @@ Builds the release validation scope inside the prebuilt Docker image:
 Options:
  --docker-image IMAGE       Docker image name to use/build/delete
-                             (default: legatus-qt6-prebuilt:latest)
+                             (default: legatus-qt6:1.0)
  --build-prebuilt-image     Build the prebuilt Docker image (from ./Dockerfile)
                             and exit. To run the build with it, run the script
                             again with --docker-image
@@ -43,6 +43,13 @@ Package production options (RPM/DEB):
  --build-number NUM         Build number for package (default: 1)
  --build-tag TAG            Build tag for package (default: manual-build)
 Coverage options (lcov):
  --run-coverage             Build the release scope with -O0 --coverage, run ctest
                             and collect an lcov coverage report (mutually
                             exclusive with --run-jenkins-builder)
  --coverage-output-dir DIR  Directory to mount for coverage output
                             (default: ./coverage-out)
 Environment variable overrides:
  BUILD_PREBUILT_IMAGE=ON|OFF
  DELETE_PREBUILT_IMAGE=ON|OFF
@@ -54,11 +61,13 @@ Environment variable overrides:
  GUEZ_MODE=ON|OFF
  BUILD_NUMBER=<num>
  BUILD_TAG=<tag>
  RUN_COVERAGE=ON|OFF
  COVERAGE_OUTPUT_DIR=<dir>
 MIGRATE_PIPELINE_ROOT resolution (highest precedence first):
  1. exported MIGRATE_PIPELINE_ROOT (e.g. from a Jenkinsfile)
  2. MIGRATE_PIPELINE_ROOT set by .envrc in this directory
-  3. derived from the script location (three levels up)
+  3. derived from the script location (the DLBO Qt6 repo root)
 Examples:
  ./new_docker_build.sh --build-prebuilt-image --docker-image legatus-qt6:1.0
@@ -67,6 +76,9 @@ Examples:
  ./new_docker_build.sh --docker-image legatus-qt6:1.0 \
    --run-jenkins-builder \
    --package-output-dir "${WORKSPACE}/rpms/${PROJECT}/${OS_VERSION}/"
  ./new_docker_build.sh --docker-image legatus-qt6:1.0 \
    --run-coverage \
    --coverage-output-dir "${WORKSPACE}/coverage/${PROJECT}/${OS_VERSION}/"
 EOF
 }
@@ -184,6 +196,8 @@ APT_PACKAGES=(
  postgresql-server-dev-all
  git
  python3-pip
  # Code coverage (genhtml ships in the same package)
  lcov
  # Packaging tools for RPM/DEB build
  rpm
  debhelper
@@ -223,7 +237,6 @@ RELEASE_BUILD_TARGETS=(
  LtsLicence
  MockCoordTrans
  # Test executables for release scope modules
  # Note: nglcomp_test excluded - compression "Unknown error" in Qt6 (requires investigation)
  # Note: grantlee_parser_smoke excluded - requires ktexttemplate_defaulttags plugin (not in release scope)
  aes_crypt_test
  ngltools_qt_smoke
@@ -263,20 +276,12 @@ build_prebuilt_image() {
 require_command docker
 # MIGRATE_PIPELINE_ROOT resolution (highest precedence first):
 #   1. exported environment variable (e.g. from a Jenkinsfile)
 #   2. .envrc in this directory (if present)
 #   3. derived from this script's location - the script always lives at
 #      <root>/qt-migration-legatus/qt6-after/qt6-migrated-legatus, so the
 #      pipeline root is three levels up. This makes the script work in a
 #      fresh Jenkins checkout with no environment setup at all.
 SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
-MIGRATE_PIPELINE_ROOT_DEFAULT="$(cd "${SCRIPT_DIR}/../../.." && pwd)"
+MIGRATE_PIPELINE_ROOT_DEFAULT="${SCRIPT_DIR}"
 PIPELINE_ROOT_EXPORTED="${MIGRATE_PIPELINE_ROOT:-}"
 if [[ -f ".envrc" ]]; then
  set -a
  # shellcheck disable=SC1091
  source ".envrc"
  set +a
 fi
@@ -296,6 +301,9 @@ DELETE_PREBUILT_IMAGE="${DELETE_PREBUILT_IMAGE:-OFF}"
 # Jenkins builder options for RPM/DEB package production
 RUN_JENKINS_BUILDER="${RUN_JENKINS_BUILDER:-OFF}"
 PACKAGE_OUTPUT_DIR="${PACKAGE_OUTPUT_DIR:-./packages-out}"
 # Code coverage (lcov)
 RUN_COVERAGE="${RUN_COVERAGE:-OFF}"
 COVERAGE_OUTPUT_DIR="${COVERAGE_OUTPUT_DIR:-./coverage-out}"
 LTS_VERSION="${LTS_VERSION:-1.0}"
 PROJECT="${PROJECT:-guez}"
 GUEZ_MODE="${GUEZ_MODE:-ON}"
@@ -328,6 +336,14 @@ while [[ $# -gt 0 ]]; do
      [[ $# -gt 0 ]] || die "--package-output-dir requires a directory path"
      PACKAGE_OUTPUT_DIR="$1"
      ;;
    --run-coverage)
      RUN_COVERAGE=ON
      ;;
    --coverage-output-dir)
      shift
      [[ $# -gt 0 ]] || die "--coverage-output-dir requires a directory path"
      COVERAGE_OUTPUT_DIR="$1"
      ;;
    --lts-version)
      shift
      [[ $# -gt 0 ]] || die "--lts-version requires a version string"
@@ -363,12 +379,17 @@ done
 BUILD_PREBUILT_IMAGE="$(normalize_on_off "$BUILD_PREBUILT_IMAGE" "BUILD_PREBUILT_IMAGE")"
 DELETE_PREBUILT_IMAGE="$(normalize_on_off "$DELETE_PREBUILT_IMAGE" "DELETE_PREBUILT_IMAGE")"
 RUN_JENKINS_BUILDER="$(normalize_on_off "$RUN_JENKINS_BUILDER" "RUN_JENKINS_BUILDER")"
 RUN_COVERAGE="$(normalize_on_off "$RUN_COVERAGE" "RUN_COVERAGE")"
 if [[ "${RUN_COVERAGE}" == "ON" && "${RUN_JENKINS_BUILDER}" == "ON" ]]; then
  die "--run-coverage is mutually exclusive with --run-jenkins-builder"
 fi
 # Default for the Docker image name
-DOCKER_IMAGE="${DOCKER_IMAGE:-legatus-qt6-prebuilt:latest}"
+DOCKER_IMAGE="${DOCKER_IMAGE:-legatus-qt6:1.0}"
 # Export variables for Docker container
-export RELEASE_BUILD RUN_CTEST BUILD_PREBUILT_IMAGE DELETE_PREBUILT_IMAGE DOCKER_IMAGE RUN_JENKINS_BUILDER PACKAGE_OUTPUT_DIR LTS_VERSION PROJECT GUEZ_MODE BUILD_NUMBER BUILD_TAG
+export RELEASE_BUILD RUN_CTEST BUILD_PREBUILT_IMAGE DELETE_PREBUILT_IMAGE DOCKER_IMAGE RUN_JENKINS_BUILDER PACKAGE_OUTPUT_DIR RUN_COVERAGE COVERAGE_OUTPUT_DIR LTS_VERSION PROJECT GUEZ_MODE BUILD_NUMBER BUILD_TAG
 require_non_empty "${DOCKER_IMAGE}" "DOCKER_IMAGE"
@@ -381,7 +402,7 @@ require_non_empty "${MIGRATE_PIPELINE_ROOT:-}" "MIGRATE_PIPELINE_ROOT"
 require_directory "${MIGRATE_PIPELINE_ROOT}" "MIGRATE_PIPELINE_ROOT"
 WORKSPACE_ROOT_HOST="${MIGRATE_PIPELINE_ROOT}"
-PROJECT_DIR_HOST="${WORKSPACE_ROOT_HOST}/qt-migration-legatus/qt6-after/qt6-migrated-legatus"
+PROJECT_DIR_HOST="${WORKSPACE_ROOT_HOST}"
 require_directory "${PROJECT_DIR_HOST}" "Project directory"
@@ -392,6 +413,8 @@ log_info "DELETE_PREBUILT_IMAGE=${DELETE_PREBUILT_IMAGE}"
 log_info "DOCKER_IMAGE=${DOCKER_IMAGE}"
 log_info "RUN_JENKINS_BUILDER=${RUN_JENKINS_BUILDER}"
 log_info "PACKAGE_OUTPUT_DIR=${PACKAGE_OUTPUT_DIR}"
 log_info "RUN_COVERAGE=${RUN_COVERAGE}"
 log_info "COVERAGE_OUTPUT_DIR=${COVERAGE_OUTPUT_DIR}"
 log_info "LTS_VERSION=${LTS_VERSION}"
 log_info "PROJECT=${PROJECT}"
 log_info "GUEZ_MODE=${GUEZ_MODE}"
@@ -427,6 +450,7 @@ RELEASE_BUILD="${RELEASE_BUILD:-ON}"
 RUN_CTEST="${RUN_CTEST:-ON}"
 # Packaging variables
 RUN_JENKINS_BUILDER="${RUN_JENKINS_BUILDER:-OFF}"
 RUN_COVERAGE="${RUN_COVERAGE:-OFF}"
 LTS_VERSION="${LTS_VERSION:-1.0}"
 PROJECT="${PROJECT:-guez}"
 GUEZ_MODE="${GUEZ_MODE:-ON}"
@@ -450,25 +474,28 @@ log_info "Using prebuilt Docker image: all build dependencies are baked in"
 export QT_QPA_PLATFORM=offscreen
-cd /workspace/qt-migration-legatus/qt6-after/qt6-migrated-legatus
+cd /workspace
 rm -rf build4
 mkdir -p build4
 cd build4
-# CMake option defaults that this branch must override:
+COV_CMAKE_ARGS=()
-#   BUILD_ARCGIS defaults to ON -> force OFF (ArcGIS SDK is not in the scope)
+if [[ "${RUN_COVERAGE}" == "ON" ]]; then
-#   RELEASE_BUILD defaults to OFF -> force ON (release scope modules only)
+  COV_CMAKE_ARGS=(
-# All other BUILD_* flags are left at their CMake defaults, which match
+    "-DCMAKE_C_FLAGS_RELEASE=-O0 -g --coverage -DNDEBUG -fPIC"
-# the release scope configuration (BUILD_RTI/CODIFICATION/VIEWER_ONLY=OFF,
+    "-DCMAKE_CXX_FLAGS_RELEASE=-O0 -g --coverage -DNDEBUG -fPIC"
-# BUILD_GRANTLEE/ALL/SV/WS/AAR=ON).
+    "-DCMAKE_EXE_LINKER_FLAGS=--coverage"
    "-DCMAKE_SHARED_LINKER_FLAGS=--coverage"
  )
 fi
 cmake .. \
  -DBUILD_TESTING=ON \
  -DBUILD_ARCGIS=OFF \
  -DRELEASE_BUILD="${RELEASE_BUILD}" \
  -DCMAKE_CXX_STANDARD=17 \
  -DCMAKE_BUILD_TYPE=Release \
-  -DCMAKE_PREFIX_PATH="${QT_BASE_DIR}/${QT_VERSION}/${QT_ARCH_DIR}:/usr/local"
+  -DCMAKE_PREFIX_PATH="${QT_BASE_DIR}/${QT_VERSION}/${QT_ARCH_DIR}:/usr/local" \
  "${COV_CMAKE_ARGS[@]}"
 read -r -a RELEASE_TARGETS_ARRAY <<< "${RELEASE_BUILD_TARGETS}"
@@ -485,22 +512,61 @@ else
  log_info "Skipping CTest"
 fi
 if [[ "${RUN_COVERAGE}" == "ON" ]]; then
  log_info "=== Code coverage (lcov) ==="
  COVOUT=/workspace/coverage-out
  SRCROOT=/workspace
  mkdir -p "${COVOUT}"
  COV_IGNORE=(--ignore-errors mismatch,inconsistent,unused)
  lcov --capture --directory . --external "${COV_IGNORE[@]}" \
       --rc branch_coverage=1 \
       --output-file "${COVOUT}/raw.info"
  lcov --extract "${COVOUT}/raw.info" \
       "${SRCROOT}/TetraIF/*" \
       "${SRCROOT}/Z/src/*" \
       "${SRCROOT}/Lts/Common/*" \
       "${SRCROOT}/Lts/Proxies/TrainingAreaBase/*" \
       "${COV_IGNORE[@]}" \
       --rc branch_coverage=1 \
       --output-file "${COVOUT}/scoped.info"
  lcov --remove "${COVOUT}/scoped.info" \
       "*/unit-test/*" \
       "*CommonUnitTestsPlaceholder*" \
       "*/UnitTests/*" \
       "*/tests/*" \
       "*/test_*" \
       "*_test.cpp" \
       "*_test.h" \
       "*_unit_test*" \
       "${COV_IGNORE[@]}" \
       --rc branch_coverage=1 \
       --output-file "${COVOUT}/coverage.info"
  lcov --summary "${COVOUT}/coverage.info" "${COV_IGNORE[@]}" --rc branch_coverage=1 \
       > "${COVOUT}/coverage_summary.txt"
  genhtml "${COVOUT}/coverage.info" \
       --output-directory "${COVOUT}/html" \
       "${COV_IGNORE[@]}" \
       --branch-coverage --legend \
       --rc branch_coverage=1
  log_info "Coverage report written to ${COVOUT} (host: ${COVERAGE_OUTPUT_DIR})"
  cat "${COVOUT}/coverage_summary.txt"
 fi
 # DEB package production with the in-tree rpmbuild script
 if [[ "${RUN_JENKINS_BUILDER}" == "ON" ]]; then
  log_info "=== DEB Package Production (in-tree rpmbuild) ==="
  OS_VERSION=$(cat /etc/os-release | grep "^VERSION_ID=" | cut -d'"' -f2)
  STAGE_DIR=/workspace/deb_stage
-  STAGED_SOURCE_DIR="${STAGE_DIR}/qt-migration-legatus/qt6-after/qt6-migrated-legatus"
+  STAGED_SOURCE_DIR="${STAGE_DIR}"
  # Stage the workspace as a clean copy. The workspace itself is NEVER
  # deleted (it contains git-managed sources); only the staging
  # subdirectory is removed.
  log_info "Staging workspace to ${STAGE_DIR}"
  rm -rf "${STAGE_DIR}"
  mkdir -p "${STAGE_DIR}"
  tar --exclude='./rpms' --exclude='./.git' --exclude='./build' \
      --exclude='./deb_build_tmp' --exclude='./deb_stage' --exclude='./packages-out' \
      --exclude='./legatus-qt6_1.0.tar.gz' \
      -cf - -C /workspace . | tar -xf - -C "${STAGE_DIR}"
  if [[ ! -f "${STAGED_SOURCE_DIR}/CMakeLists.txt" || ! -f "${STAGED_SOURCE_DIR}/rpmbuild/make_rpm_ubuntu26.py" ]]; then
@@ -531,12 +597,7 @@ if [[ "${RUN_JENKINS_BUILDER}" == "ON" ]]; then
    exit 1
  fi
-  # Copy produced DEB packages to the packages-out mount (host:
+  # Copy produced DEB packages to the packages-out
  # ${PACKAGE_OUTPUT_DIR}, container: /workspace/packages-out) so they are
  # available on the host after the container exits.
  # make_rpm already writes to /workspace/rpms/... (the host workspace
  # mount), so when the host's PACKAGE_OUTPUT_DIR is that same directory
  # the packages are already in place - skip copying onto themselves.
  DEST_DIR=/workspace/packages-out
  mkdir -p "${DEST_DIR}"
  shopt -s nullglob
@@ -565,6 +626,8 @@ docker run --rm \
  -e RELEASE_BUILD \
  -e RUN_CTEST \
  -e RUN_JENKINS_BUILDER \
  -e RUN_COVERAGE \
  -e COVERAGE_OUTPUT_DIR \
  -e PACKAGE_OUTPUT_DIR \
  -e LTS_VERSION \
  -e PROJECT \
@@ -577,8 +640,8 @@ docker run --rm \
  -e QT_BASE_DIR \
  -e RELEASE_BUILD_TARGETS="${RELEASE_BUILD_TARGETS_STRING}" \
  -v "${WORKSPACE_ROOT_HOST}:/workspace" \
  -v "${MIGRATE_PIPELINE_ROOT}/external:/workspace/external:ro" \
  -v "${CONTAINER_SCRIPT_HOST}:/tmp/run-build-inside-container.sh:ro" \
  -v "${PACKAGE_OUTPUT_DIR}:/workspace/packages-out" \
  -v "${COVERAGE_OUTPUT_DIR}:/workspace/coverage-out" \
  "${DOCKER_IMAGE}" \
  bash /tmp/run-build-inside-container.sh
@@ -1,4 +0,0 @@
 # Validation-scope branch: no test sources are shipped and nothing in this
 # directory is built by the release build (the former migration_tests target
 # was guarded by NOT RELEASE_BUILD). This file only keeps the unconditional
 # ADD_SUBDIRECTORY(tests) from the root CMakeLists.txt resolvable.
@@ -1,20 +0,0 @@
 cmake_minimum_required(VERSION 3.21)
 project(GTests LANGUAGES CXX)
 include(FetchContent)
 FetchContent_Declare(
  googletest
  URL https://github.com/google/googletest/archive/refs/tags/release-1.14.0.tar.gz
 )
 FetchContent_MakeAvailable(googletest)
 # Collect generated test sources
 file(GLOB GTEST_SRCS "${CMAKE_SOURCE_DIR}/Z/*_test.cpp")
 add_executable(gtests_all ${GTEST_SRCS})
 target_compile_features(gtests_all PRIVATE cxx_std_20)
 target_include_directories(gtests_all PRIVATE ${CMAKE_SOURCE_DIR}/../../)
 # link to gtest
 target_link_libraries(gtests_all PRIVATE GTest::gtest_main)
 include(GoogleTest)
 gtest_discover_tests(gtests_all)
@@ -1,11 +0,0 @@
 Generated GoogleTest stubs for Z/src.
 Usage:
  python3 tests/gtest/generate_gtests.py    # generate test sources and CMakeLists
  cmake -S . -B build
  cmake --build build -- -j5
  ctest --test-dir build -j5
 Notes:
 - Tests are lightweight smoke stubs that compile and assert true. Replace with meaningful assertions per-function.
 - Uses FetchContent to download GoogleTest at configure time.
@@ -1,57 +0,0 @@
 #!/usr/bin/env python3
 """
 Generate a single GoogleTest binary from lightweight per-source test stubs.
 Run from repo root: python3 tests/gtest/generate_gtests.py
 """
 import os
 from pathlib import Path
 ROOT = Path(__file__).resolve().parents[2]
 SRC_DIR = ROOT / 'Z' / 'src'
 OUT_DIR = ROOT / 'tests' / 'gtest' / 'Z'
 OUT_DIR.mkdir(parents=True, exist_ok=True)
 TEMPLATE = '''#include <gtest/gtest.h>\n{includes}\n\nTEST({test_suite}, smoke) {{\n    // TODO: replace with meaningful unit tests for {rel_cpp}\n    ASSERT_TRUE(true);\n}}\n'''
 sources = []
 for cpp in sorted(SRC_DIR.rglob('*.cpp')):
    rel = cpp.relative_to(SRC_DIR)
    name = str(rel).replace(os.sep, '__')
    out_cpp = OUT_DIR / (name + '_test.cpp')
    # try to include corresponding header if exists
    header = cpp.with_suffix('.h')
    includes = ''
    if header.exists():
        includes = f'#include "{header.relative_to(ROOT)}"'
    else:
        includes = '// no corresponding header to include'
    content = TEMPLATE.format(includes=includes, test_suite=name.replace('.', '_'), rel_cpp=str(rel))
    out_cpp.write_text(content)
    sources.append(str(Path('tests/gtest/Z') / (name + '_test.cpp')))
 # Write CMakeLists for gtests
 cmake = ROOT / 'tests' / 'gtest' / 'CMakeLists.txt'
 cmake.write_text('''
 cmake_minimum_required(VERSION 3.21)
 project(GTests LANGUAGES CXX)
 include(FetchContent)
 FetchContent_Declare(
  googletest
  URL https://github.com/google/googletest/archive/refs/tags/release-1.14.0.tar.gz
 )
 FetchContent_MakeAvailable(googletest)
 # Collect generated test sources
 file(GLOB GTEST_SRCS "${CMAKE_SOURCE_DIR}/Z/*_test.cpp")
 add_executable(gtests_all ${GTEST_SRCS})
 target_compile_features(gtests_all PRIVATE cxx_std_20)
 target_include_directories(gtests_all PRIVATE ${CMAKE_SOURCE_DIR}/../../)
 # link to gtest
 target_link_libraries(gtests_all PRIVATE GTest::gtest_main)
 include(GoogleTest)
 gtest_discover_tests(gtests_all)
 ''')
 print(f"Wrote {len(sources)} test stubs to {OUT_DIR}")
 print("Run: cmake -S . -B build && cmake --build build -- -j5 && ctest --test-dir build -j5")
@@ -1,14 +0,0 @@
 # Strix instruction for Z/src/NGLLogger/MurmurHash2.cpp
 Please perform a focused White-box security assessment of the repository area containing the file `Z/src/NGLLogger/MurmurHash2.cpp`.
 Scope:
 - Focus analysis on the code in: `Z/src/NGLLogger/MurmurHash2.cpp`
 - Treat this as a white-box scan: use source code to prioritize findings and generate PoCs
 - If applicable, attempt to reproduce vulnerabilities (in PoC) and provide remediation guidance
 Notes for Strix:
 - Use `--scan-mode quick` for fast checks or `--scan-mode standard` for deeper analysis
 - Use `--instruction-file` with this file when invoking strix CLI
 Do NOT run active exploitation against third-party services. Only analyze code in-repo.
@@ -1,14 +0,0 @@
 # Strix instruction for Z/src/NGLLogger/NGLLogger.cpp
 Please perform a focused White-box security assessment of the repository area containing the file `Z/src/NGLLogger/NGLLogger.cpp`.
 Scope:
 - Focus analysis on the code in: `Z/src/NGLLogger/NGLLogger.cpp`
 - Treat this as a white-box scan: use source code to prioritize findings and generate PoCs
 - If applicable, attempt to reproduce vulnerabilities (in PoC) and provide remediation guidance
 Notes for Strix:
 - Use `--scan-mode quick` for fast checks or `--scan-mode standard` for deeper analysis
 - Use `--instruction-file` with this file when invoking strix CLI
 Do NOT run active exploitation against third-party services. Only analyze code in-repo.
@@ -1,14 +0,0 @@
 # Strix instruction for Z/src/NGLLogger/NGLLoggerBootstrap.cpp
 Please perform a focused White-box security assessment of the repository area containing the file `Z/src/NGLLogger/NGLLoggerBootstrap.cpp`.
 Scope:
 - Focus analysis on the code in: `Z/src/NGLLogger/NGLLoggerBootstrap.cpp`
 - Treat this as a white-box scan: use source code to prioritize findings and generate PoCs
 - If applicable, attempt to reproduce vulnerabilities (in PoC) and provide remediation guidance
 Notes for Strix:
 - Use `--scan-mode quick` for fast checks or `--scan-mode standard` for deeper analysis
 - Use `--instruction-file` with this file when invoking strix CLI
 Do NOT run active exploitation against third-party services. Only analyze code in-repo.
@@ -1,14 +0,0 @@
 # Strix instruction for Z/src/NGLLogger/test_ngllogger.cpp
 Please perform a focused White-box security assessment of the repository area containing the file `Z/src/NGLLogger/test_ngllogger.cpp`.
 Scope:
 - Focus analysis on the code in: `Z/src/NGLLogger/test_ngllogger.cpp`
 - Treat this as a white-box scan: use source code to prioritize findings and generate PoCs
 - If applicable, attempt to reproduce vulnerabilities (in PoC) and provide remediation guidance
 Notes for Strix:
 - Use `--scan-mode quick` for fast checks or `--scan-mode standard` for deeper analysis
 - Use `--instruction-file` with this file when invoking strix CLI
 Do NOT run active exploitation against third-party services. Only analyze code in-repo.
@@ -1,14 +0,0 @@
 # Strix instruction for Z/src/QtSingleApplication/qtlocalpeer.cpp
 Please perform a focused White-box security assessment of the repository area containing the file `Z/src/QtSingleApplication/qtlocalpeer.cpp`.
 Scope:
 - Focus analysis on the code in: `Z/src/QtSingleApplication/qtlocalpeer.cpp`
 - Treat this as a white-box scan: use source code to prioritize findings and generate PoCs
 - If applicable, attempt to reproduce vulnerabilities (in PoC) and provide remediation guidance
 Notes for Strix:
 - Use `--scan-mode quick` for fast checks or `--scan-mode standard` for deeper analysis
 - Use `--instruction-file` with this file when invoking strix CLI
 Do NOT run active exploitation against third-party services. Only analyze code in-repo.
@@ -1,14 +0,0 @@
 # Strix instruction for Z/src/QtSingleApplication/qtlockedfile.cpp
 Please perform a focused White-box security assessment of the repository area containing the file `Z/src/QtSingleApplication/qtlockedfile.cpp`.
 Scope:
 - Focus analysis on the code in: `Z/src/QtSingleApplication/qtlockedfile.cpp`
 - Treat this as a white-box scan: use source code to prioritize findings and generate PoCs
 - If applicable, attempt to reproduce vulnerabilities (in PoC) and provide remediation guidance
 Notes for Strix:
 - Use `--scan-mode quick` for fast checks or `--scan-mode standard` for deeper analysis
 - Use `--instruction-file` with this file when invoking strix CLI
 Do NOT run active exploitation against third-party services. Only analyze code in-repo.
@@ -1,14 +0,0 @@
 # Strix instruction for Z/src/QtSingleApplication/qtlockedfile_unix.cpp
 Please perform a focused White-box security assessment of the repository area containing the file `Z/src/QtSingleApplication/qtlockedfile_unix.cpp`.
 Scope:
 - Focus analysis on the code in: `Z/src/QtSingleApplication/qtlockedfile_unix.cpp`
 - Treat this as a white-box scan: use source code to prioritize findings and generate PoCs
 - If applicable, attempt to reproduce vulnerabilities (in PoC) and provide remediation guidance
 Notes for Strix:
 - Use `--scan-mode quick` for fast checks or `--scan-mode standard` for deeper analysis
 - Use `--instruction-file` with this file when invoking strix CLI
 Do NOT run active exploitation against third-party services. Only analyze code in-repo.
@@ -1,14 +0,0 @@
 # Strix instruction for Z/src/QtSingleApplication/qtlockedfile_win.cpp
 Please perform a focused White-box security assessment of the repository area containing the file `Z/src/QtSingleApplication/qtlockedfile_win.cpp`.
 Scope:
 - Focus analysis on the code in: `Z/src/QtSingleApplication/qtlockedfile_win.cpp`
 - Treat this as a white-box scan: use source code to prioritize findings and generate PoCs
 - If applicable, attempt to reproduce vulnerabilities (in PoC) and provide remediation guidance
 Notes for Strix:
 - Use `--scan-mode quick` for fast checks or `--scan-mode standard` for deeper analysis
 - Use `--instruction-file` with this file when invoking strix CLI
 Do NOT run active exploitation against third-party services. Only analyze code in-repo.
@@ -1,14 +0,0 @@
 # Strix instruction for Z/src/QtSingleApplication/qtsingleapplication.cpp
 Please perform a focused White-box security assessment of the repository area containing the file `Z/src/QtSingleApplication/qtsingleapplication.cpp`.
 Scope:
 - Focus analysis on the code in: `Z/src/QtSingleApplication/qtsingleapplication.cpp`
 - Treat this as a white-box scan: use source code to prioritize findings and generate PoCs
 - If applicable, attempt to reproduce vulnerabilities (in PoC) and provide remediation guidance
 Notes for Strix:
 - Use `--scan-mode quick` for fast checks or `--scan-mode standard` for deeper analysis
 - Use `--instruction-file` with this file when invoking strix CLI
 Do NOT run active exploitation against third-party services. Only analyze code in-repo.
@@ -1,14 +0,0 @@
 # Strix instruction for Z/src/QtSingleApplication/qtsinglecoreapplication.cpp
 Please perform a focused White-box security assessment of the repository area containing the file `Z/src/QtSingleApplication/qtsinglecoreapplication.cpp`.
 Scope:
 - Focus analysis on the code in: `Z/src/QtSingleApplication/qtsinglecoreapplication.cpp`
 - Treat this as a white-box scan: use source code to prioritize findings and generate PoCs
 - If applicable, attempt to reproduce vulnerabilities (in PoC) and provide remediation guidance
 Notes for Strix:
 - Use `--scan-mode quick` for fast checks or `--scan-mode standard` for deeper analysis
 - Use `--instruction-file` with this file when invoking strix CLI
 Do NOT run active exploitation against third-party services. Only analyze code in-repo.
@@ -1,14 +0,0 @@
 # Strix instruction for Z/src/WMS_Interface/wms_ecc_equipRequirements.cpp
 Please perform a focused White-box security assessment of the repository area containing the file `Z/src/WMS_Interface/wms_ecc_equipRequirements.cpp`.
 Scope:
 - Focus analysis on the code in: `Z/src/WMS_Interface/wms_ecc_equipRequirements.cpp`
 - Treat this as a white-box scan: use source code to prioritize findings and generate PoCs
 - If applicable, attempt to reproduce vulnerabilities (in PoC) and provide remediation guidance
 Notes for Strix:
 - Use `--scan-mode quick` for fast checks or `--scan-mode standard` for deeper analysis
 - Use `--instruction-file` with this file when invoking strix CLI
 Do NOT run active exploitation against third-party services. Only analyze code in-repo.
@@ -1,14 +0,0 @@
 # Strix instruction for Z/src/WMS_Interface/wms_ecc_equipmenttypes.cpp
 Please perform a focused White-box security assessment of the repository area containing the file `Z/src/WMS_Interface/wms_ecc_equipmenttypes.cpp`.
 Scope:
 - Focus analysis on the code in: `Z/src/WMS_Interface/wms_ecc_equipmenttypes.cpp`
 - Treat this as a white-box scan: use source code to prioritize findings and generate PoCs
 - If applicable, attempt to reproduce vulnerabilities (in PoC) and provide remediation guidance
 Notes for Strix:
 - Use `--scan-mode quick` for fast checks or `--scan-mode standard` for deeper analysis
 - Use `--instruction-file` with this file when invoking strix CLI
 Do NOT run active exploitation against third-party services. Only analyze code in-repo.
@@ -1,14 +0,0 @@
 # Strix instruction for Z/src/WMS_Interface/wms_ecc_exercises.cpp
 Please perform a focused White-box security assessment of the repository area containing the file `Z/src/WMS_Interface/wms_ecc_exercises.cpp`.
 Scope:
 - Focus analysis on the code in: `Z/src/WMS_Interface/wms_ecc_exercises.cpp`
 - Treat this as a white-box scan: use source code to prioritize findings and generate PoCs
 - If applicable, attempt to reproduce vulnerabilities (in PoC) and provide remediation guidance
 Notes for Strix:
 - Use `--scan-mode quick` for fast checks or `--scan-mode standard` for deeper analysis
 - Use `--instruction-file` with this file when invoking strix CLI
 Do NOT run active exploitation against third-party services. Only analyze code in-repo.
@@ -1,14 +0,0 @@
 # Strix instruction for Z/src/WMS_Interface/wms_ecc_playerInfo.cpp
 Please perform a focused White-box security assessment of the repository area containing the file `Z/src/WMS_Interface/wms_ecc_playerInfo.cpp`.
 Scope:
 - Focus analysis on the code in: `Z/src/WMS_Interface/wms_ecc_playerInfo.cpp`
 - Treat this as a white-box scan: use source code to prioritize findings and generate PoCs
 - If applicable, attempt to reproduce vulnerabilities (in PoC) and provide remediation guidance
 Notes for Strix:
 - Use `--scan-mode quick` for fast checks or `--scan-mode standard` for deeper analysis
 - Use `--instruction-file` with this file when invoking strix CLI
 Do NOT run active exploitation against third-party services. Only analyze code in-repo.
@@ -1,14 +0,0 @@
 # Strix instruction for Z/src/WMS_Interface/wms_ecc_registration.cpp
 Please perform a focused White-box security assessment of the repository area containing the file `Z/src/WMS_Interface/wms_ecc_registration.cpp`.
 Scope:
 - Focus analysis on the code in: `Z/src/WMS_Interface/wms_ecc_registration.cpp`
 - Treat this as a white-box scan: use source code to prioritize findings and generate PoCs
 - If applicable, attempt to reproduce vulnerabilities (in PoC) and provide remediation guidance
 Notes for Strix:
 - Use `--scan-mode quick` for fast checks or `--scan-mode standard` for deeper analysis
 - Use `--instruction-file` with this file when invoking strix CLI
 Do NOT run active exploitation against third-party services. Only analyze code in-repo.
@@ -1,14 +0,0 @@
 # Strix instruction for Z/src/WMS_Interface/wms_ecc_unregister.cpp
 Please perform a focused White-box security assessment of the repository area containing the file `Z/src/WMS_Interface/wms_ecc_unregister.cpp`.
 Scope:
 - Focus analysis on the code in: `Z/src/WMS_Interface/wms_ecc_unregister.cpp`
 - Treat this as a white-box scan: use source code to prioritize findings and generate PoCs
 - If applicable, attempt to reproduce vulnerabilities (in PoC) and provide remediation guidance
 Notes for Strix:
 - Use `--scan-mode quick` for fast checks or `--scan-mode standard` for deeper analysis
 - Use `--instruction-file` with this file when invoking strix CLI
 Do NOT run active exploitation against third-party services. Only analyze code in-repo.
@@ -1,14 +0,0 @@
 # Strix instruction for Z/src/nglapplication/nglapplication.cpp
 Please perform a focused White-box security assessment of the repository area containing the file `Z/src/nglapplication/nglapplication.cpp`.
 Scope:
 - Focus analysis on the code in: `Z/src/nglapplication/nglapplication.cpp`
 - Treat this as a white-box scan: use source code to prioritize findings and generate PoCs
 - If applicable, attempt to reproduce vulnerabilities (in PoC) and provide remediation guidance
 Notes for Strix:
 - Use `--scan-mode quick` for fast checks or `--scan-mode standard` for deeper analysis
 - Use `--instruction-file` with this file when invoking strix CLI
 Do NOT run active exploitation against third-party services. Only analyze code in-repo.
@@ -1,14 +0,0 @@
 # Strix instruction for Z/src/nglapplication/nglcoreapplication.cpp
 Please perform a focused White-box security assessment of the repository area containing the file `Z/src/nglapplication/nglcoreapplication.cpp`.
 Scope:
 - Focus analysis on the code in: `Z/src/nglapplication/nglcoreapplication.cpp`
 - Treat this as a white-box scan: use source code to prioritize findings and generate PoCs
 - If applicable, attempt to reproduce vulnerabilities (in PoC) and provide remediation guidance
 Notes for Strix:
 - Use `--scan-mode quick` for fast checks or `--scan-mode standard` for deeper analysis
 - Use `--instruction-file` with this file when invoking strix CLI
 Do NOT run active exploitation against third-party services. Only analyze code in-repo.
@@ -1,14 +0,0 @@
 # Strix instruction for Z/src/nglapplication/nglguiapplication.cpp
 Please perform a focused White-box security assessment of the repository area containing the file `Z/src/nglapplication/nglguiapplication.cpp`.
 Scope:
 - Focus analysis on the code in: `Z/src/nglapplication/nglguiapplication.cpp`
 - Treat this as a white-box scan: use source code to prioritize findings and generate PoCs
 - If applicable, attempt to reproduce vulnerabilities (in PoC) and provide remediation guidance
 Notes for Strix:
 - Use `--scan-mode quick` for fast checks or `--scan-mode standard` for deeper analysis
 - Use `--instruction-file` with this file when invoking strix CLI
 Do NOT run active exploitation against third-party services. Only analyze code in-repo.
@@ -1,14 +0,0 @@
 # Strix instruction for Z/src/nglapplication/nglloggerhandler.cpp
 Please perform a focused White-box security assessment of the repository area containing the file `Z/src/nglapplication/nglloggerhandler.cpp`.
 Scope:
 - Focus analysis on the code in: `Z/src/nglapplication/nglloggerhandler.cpp`
 - Treat this as a white-box scan: use source code to prioritize findings and generate PoCs
 - If applicable, attempt to reproduce vulnerabilities (in PoC) and provide remediation guidance
 Notes for Strix:
 - Use `--scan-mode quick` for fast checks or `--scan-mode standard` for deeper analysis
 - Use `--instruction-file` with this file when invoking strix CLI
 Do NOT run active exploitation against third-party services. Only analyze code in-repo.
@@ -1,14 +0,0 @@
 # Strix instruction for Z/src/nglapplication/nglsingleapplication.cpp
 Please perform a focused White-box security assessment of the repository area containing the file `Z/src/nglapplication/nglsingleapplication.cpp`.
 Scope:
 - Focus analysis on the code in: `Z/src/nglapplication/nglsingleapplication.cpp`
 - Treat this as a white-box scan: use source code to prioritize findings and generate PoCs
 - If applicable, attempt to reproduce vulnerabilities (in PoC) and provide remediation guidance
 Notes for Strix:
 - Use `--scan-mode quick` for fast checks or `--scan-mode standard` for deeper analysis
 - Use `--instruction-file` with this file when invoking strix CLI
 Do NOT run active exploitation against third-party services. Only analyze code in-repo.
@@ -1,14 +0,0 @@
 # Strix instruction for Z/src/nglapplication/nglsinglecoreapplication.cpp
 Please perform a focused White-box security assessment of the repository area containing the file `Z/src/nglapplication/nglsinglecoreapplication.cpp`.
 Scope:
 - Focus analysis on the code in: `Z/src/nglapplication/nglsinglecoreapplication.cpp`
 - Treat this as a white-box scan: use source code to prioritize findings and generate PoCs
 - If applicable, attempt to reproduce vulnerabilities (in PoC) and provide remediation guidance
 Notes for Strix:
 - Use `--scan-mode quick` for fast checks or `--scan-mode standard` for deeper analysis
 - Use `--instruction-file` with this file when invoking strix CLI
 Do NOT run active exploitation against third-party services. Only analyze code in-repo.
@@ -1,14 +0,0 @@
 # Strix instruction for Z/src/nglcompression/nglcomp_bzip2iodevice.cpp
 Please perform a focused White-box security assessment of the repository area containing the file `Z/src/nglcompression/nglcomp_bzip2iodevice.cpp`.
 Scope:
 - Focus analysis on the code in: `Z/src/nglcompression/nglcomp_bzip2iodevice.cpp`
 - Treat this as a white-box scan: use source code to prioritize findings and generate PoCs
 - If applicable, attempt to reproduce vulnerabilities (in PoC) and provide remediation guidance
 Notes for Strix:
 - Use `--scan-mode quick` for fast checks or `--scan-mode standard` for deeper analysis
 - Use `--instruction-file` with this file when invoking strix CLI
 Do NOT run active exploitation against third-party services. Only analyze code in-repo.
@@ -1,14 +0,0 @@
 # Strix instruction for Z/src/nglcompression/nglcomp_compress.cpp
 Please perform a focused White-box security assessment of the repository area containing the file `Z/src/nglcompression/nglcomp_compress.cpp`.
 Scope:
 - Focus analysis on the code in: `Z/src/nglcompression/nglcomp_compress.cpp`
 - Treat this as a white-box scan: use source code to prioritize findings and generate PoCs
 - If applicable, attempt to reproduce vulnerabilities (in PoC) and provide remediation guidance
 Notes for Strix:
 - Use `--scan-mode quick` for fast checks or `--scan-mode standard` for deeper analysis
 - Use `--instruction-file` with this file when invoking strix CLI
 Do NOT run active exploitation against third-party services. Only analyze code in-repo.
@@ -1,14 +0,0 @@
 # Strix instruction for Z/src/nglcompression/nglcomp_tarfilter.cpp
 Please perform a focused White-box security assessment of the repository area containing the file `Z/src/nglcompression/nglcomp_tarfilter.cpp`.
 Scope:
 - Focus analysis on the code in: `Z/src/nglcompression/nglcomp_tarfilter.cpp`
 - Treat this as a white-box scan: use source code to prioritize findings and generate PoCs
 - If applicable, attempt to reproduce vulnerabilities (in PoC) and provide remediation guidance
 Notes for Strix:
 - Use `--scan-mode quick` for fast checks or `--scan-mode standard` for deeper analysis
 - Use `--instruction-file` with this file when invoking strix CLI
 Do NOT run active exploitation against third-party services. Only analyze code in-repo.
@@ -1,14 +0,0 @@
 # Strix instruction for Z/src/nglcompression/nglcomp_test.cpp
 Please perform a focused White-box security assessment of the repository area containing the file `Z/src/nglcompression/nglcomp_test.cpp`.
 Scope:
 - Focus analysis on the code in: `Z/src/nglcompression/nglcomp_test.cpp`
 - Treat this as a white-box scan: use source code to prioritize findings and generate PoCs
 - If applicable, attempt to reproduce vulnerabilities (in PoC) and provide remediation guidance
 Notes for Strix:
 - Use `--scan-mode quick` for fast checks or `--scan-mode standard` for deeper analysis
 - Use `--instruction-file` with this file when invoking strix CLI
 Do NOT run active exploitation against third-party services. Only analyze code in-repo.
@@ -1,14 +0,0 @@
 # Strix instruction for Z/src/ngldb/dbconnection.cpp
 Please perform a focused White-box security assessment of the repository area containing the file `Z/src/ngldb/dbconnection.cpp`.
 Scope:
 - Focus analysis on the code in: `Z/src/ngldb/dbconnection.cpp`
 - Treat this as a white-box scan: use source code to prioritize findings and generate PoCs
 - If applicable, attempt to reproduce vulnerabilities (in PoC) and provide remediation guidance
 Notes for Strix:
 - Use `--scan-mode quick` for fast checks or `--scan-mode standard` for deeper analysis
 - Use `--instruction-file` with this file when invoking strix CLI
 Do NOT run active exploitation against third-party services. Only analyze code in-repo.
@@ -1,14 +0,0 @@
 # Strix instruction for Z/src/ngldb/dbtransaction.cpp
 Please perform a focused White-box security assessment of the repository area containing the file `Z/src/ngldb/dbtransaction.cpp`.
 Scope:
 - Focus analysis on the code in: `Z/src/ngldb/dbtransaction.cpp`
 - Treat this as a white-box scan: use source code to prioritize findings and generate PoCs
 - If applicable, attempt to reproduce vulnerabilities (in PoC) and provide remediation guidance
 Notes for Strix:
 - Use `--scan-mode quick` for fast checks or `--scan-mode standard` for deeper analysis
 - Use `--instruction-file` with this file when invoking strix CLI
 Do NOT run active exploitation against third-party services. Only analyze code in-repo.
@@ -1,14 +0,0 @@
 # Strix instruction for Z/src/ngldb/ngldb_logger.cpp
 Please perform a focused White-box security assessment of the repository area containing the file `Z/src/ngldb/ngldb_logger.cpp`.
 Scope:
 - Focus analysis on the code in: `Z/src/ngldb/ngldb_logger.cpp`
 - Treat this as a white-box scan: use source code to prioritize findings and generate PoCs
 - If applicable, attempt to reproduce vulnerabilities (in PoC) and provide remediation guidance
 Notes for Strix:
 - Use `--scan-mode quick` for fast checks or `--scan-mode standard` for deeper analysis
 - Use `--instruction-file` with this file when invoking strix CLI
 Do NOT run active exploitation against third-party services. Only analyze code in-repo.
@@ -1,14 +0,0 @@
 # Strix instruction for Z/src/ngldb/nsqlquery.cpp
 Please perform a focused White-box security assessment of the repository area containing the file `Z/src/ngldb/nsqlquery.cpp`.
 Scope:
 - Focus analysis on the code in: `Z/src/ngldb/nsqlquery.cpp`
 - Treat this as a white-box scan: use source code to prioritize findings and generate PoCs
 - If applicable, attempt to reproduce vulnerabilities (in PoC) and provide remediation guidance
 Notes for Strix:
 - Use `--scan-mode quick` for fast checks or `--scan-mode standard` for deeper analysis
 - Use `--instruction-file` with this file when invoking strix CLI
 Do NOT run active exploitation against third-party services. Only analyze code in-repo.
@@ -1,14 +0,0 @@
 # Strix instruction for Z/src/ngldb/sql_query_janitor.cpp
 Please perform a focused White-box security assessment of the repository area containing the file `Z/src/ngldb/sql_query_janitor.cpp`.
 Scope:
 - Focus analysis on the code in: `Z/src/ngldb/sql_query_janitor.cpp`
 - Treat this as a white-box scan: use source code to prioritize findings and generate PoCs
 - If applicable, attempt to reproduce vulnerabilities (in PoC) and provide remediation guidance
 Notes for Strix:
 - Use `--scan-mode quick` for fast checks or `--scan-mode standard` for deeper analysis
 - Use `--instruction-file` with this file when invoking strix CLI
 Do NOT run active exploitation against third-party services. Only analyze code in-repo.
@@ -1,14 +0,0 @@
 # Strix instruction for Z/src/nglsettings/nglsettings_connections.cpp
 Please perform a focused White-box security assessment of the repository area containing the file `Z/src/nglsettings/nglsettings_connections.cpp`.
 Scope:
 - Focus analysis on the code in: `Z/src/nglsettings/nglsettings_connections.cpp`
 - Treat this as a white-box scan: use source code to prioritize findings and generate PoCs
 - If applicable, attempt to reproduce vulnerabilities (in PoC) and provide remediation guidance
 Notes for Strix:
 - Use `--scan-mode quick` for fast checks or `--scan-mode standard` for deeper analysis
 - Use `--instruction-file` with this file when invoking strix CLI
 Do NOT run active exploitation against third-party services. Only analyze code in-repo.
@@ -1,14 +0,0 @@
 # Strix instruction for Z/src/nglsettings/nglsettings_settings.cpp
 Please perform a focused White-box security assessment of the repository area containing the file `Z/src/nglsettings/nglsettings_settings.cpp`.
 Scope:
 - Focus analysis on the code in: `Z/src/nglsettings/nglsettings_settings.cpp`
 - Treat this as a white-box scan: use source code to prioritize findings and generate PoCs
 - If applicable, attempt to reproduce vulnerabilities (in PoC) and provide remediation guidance
 Notes for Strix:
 - Use `--scan-mode quick` for fast checks or `--scan-mode standard` for deeper analysis
 - Use `--instruction-file` with this file when invoking strix CLI
 Do NOT run active exploitation against third-party services. Only analyze code in-repo.
@@ -1,14 +0,0 @@
 # Strix instruction for Z/src/ngltools/ngltools_convert.cpp
 Please perform a focused White-box security assessment of the repository area containing the file `Z/src/ngltools/ngltools_convert.cpp`.
 Scope:
 - Focus analysis on the code in: `Z/src/ngltools/ngltools_convert.cpp`
 - Treat this as a white-box scan: use source code to prioritize findings and generate PoCs
 - If applicable, attempt to reproduce vulnerabilities (in PoC) and provide remediation guidance
 Notes for Strix:
 - Use `--scan-mode quick` for fast checks or `--scan-mode standard` for deeper analysis
 - Use `--instruction-file` with this file when invoking strix CLI
 Do NOT run active exploitation against third-party services. Only analyze code in-repo.
@@ -1,14 +0,0 @@
 # Strix instruction for Z/src/ngltools/ngltools_dtg.cpp
 Please perform a focused White-box security assessment of the repository area containing the file `Z/src/ngltools/ngltools_dtg.cpp`.
 Scope:
 - Focus analysis on the code in: `Z/src/ngltools/ngltools_dtg.cpp`
 - Treat this as a white-box scan: use source code to prioritize findings and generate PoCs
 - If applicable, attempt to reproduce vulnerabilities (in PoC) and provide remediation guidance
 Notes for Strix:
 - Use `--scan-mode quick` for fast checks or `--scan-mode standard` for deeper analysis
 - Use `--instruction-file` with this file when invoking strix CLI
 Do NOT run active exploitation against third-party services. Only analyze code in-repo.
@@ -1,14 +0,0 @@
 # Strix instruction for Z/src/ngltools/ngltools_filesystem.cpp
 Please perform a focused White-box security assessment of the repository area containing the file `Z/src/ngltools/ngltools_filesystem.cpp`.
 Scope:
 - Focus analysis on the code in: `Z/src/ngltools/ngltools_filesystem.cpp`
 - Treat this as a white-box scan: use source code to prioritize findings and generate PoCs
 - If applicable, attempt to reproduce vulnerabilities (in PoC) and provide remediation guidance
 Notes for Strix:
 - Use `--scan-mode quick` for fast checks or `--scan-mode standard` for deeper analysis
 - Use `--instruction-file` with this file when invoking strix CLI
 Do NOT run active exploitation against third-party services. Only analyze code in-repo.
@@ -1,14 +0,0 @@
 # Strix instruction for Z/src/ngltools/ngltools_helpevent.cpp
 Please perform a focused White-box security assessment of the repository area containing the file `Z/src/ngltools/ngltools_helpevent.cpp`.
 Scope:
 - Focus analysis on the code in: `Z/src/ngltools/ngltools_helpevent.cpp`
 - Treat this as a white-box scan: use source code to prioritize findings and generate PoCs
 - If applicable, attempt to reproduce vulnerabilities (in PoC) and provide remediation guidance
 Notes for Strix:
 - Use `--scan-mode quick` for fast checks or `--scan-mode standard` for deeper analysis
 - Use `--instruction-file` with this file when invoking strix CLI
 Do NOT run active exploitation against third-party services. Only analyze code in-repo.
@@ -1,14 +0,0 @@
 # Strix instruction for Z/src/ngltranslator/ngltranslator.cpp
 Please perform a focused White-box security assessment of the repository area containing the file `Z/src/ngltranslator/ngltranslator.cpp`.
 Scope:
 - Focus analysis on the code in: `Z/src/ngltranslator/ngltranslator.cpp`
 - Treat this as a white-box scan: use source code to prioritize findings and generate PoCs
 - If applicable, attempt to reproduce vulnerabilities (in PoC) and provide remediation guidance
 Notes for Strix:
 - Use `--scan-mode quick` for fast checks or `--scan-mode standard` for deeper analysis
 - Use `--instruction-file` with this file when invoking strix CLI
 Do NOT run active exploitation against third-party services. Only analyze code in-repo.
@@ -1,14 +0,0 @@
 # Strix instruction for Z/src/nglwidgets/ngldialog.cpp
 Please perform a focused White-box security assessment of the repository area containing the file `Z/src/nglwidgets/ngldialog.cpp`.
 Scope:
 - Focus analysis on the code in: `Z/src/nglwidgets/ngldialog.cpp`
 - Treat this as a white-box scan: use source code to prioritize findings and generate PoCs
 - If applicable, attempt to reproduce vulnerabilities (in PoC) and provide remediation guidance
 Notes for Strix:
 - Use `--scan-mode quick` for fast checks or `--scan-mode standard` for deeper analysis
 - Use `--instruction-file` with this file when invoking strix CLI
 Do NOT run active exploitation against third-party services. Only analyze code in-repo.
@@ -1,14 +0,0 @@
 # Strix instruction for Z/src/nglwidgets/ngldialogbuttonbox.cpp
 Please perform a focused White-box security assessment of the repository area containing the file `Z/src/nglwidgets/ngldialogbuttonbox.cpp`.
 Scope:
 - Focus analysis on the code in: `Z/src/nglwidgets/ngldialogbuttonbox.cpp`
 - Treat this as a white-box scan: use source code to prioritize findings and generate PoCs
 - If applicable, attempt to reproduce vulnerabilities (in PoC) and provide remediation guidance
 Notes for Strix:
 - Use `--scan-mode quick` for fast checks or `--scan-mode standard` for deeper analysis
 - Use `--instruction-file` with this file when invoking strix CLI
 Do NOT run active exploitation against third-party services. Only analyze code in-repo.
Author	SHA1	Message	Date
berrux-dev	d130c55be5	Fix Qt6 resource compilation so LogView icons are embedded at runtime - QT5_ADD_RESOURCES was a no-op stub under Qt6, silently dropping .qrc files: LogView's :/image/* icons were never compiled into the binary. Map the stub onto qt6_add_resources() (outfiles-variable form, which appends the generated qrc_.cpp to the source list). LogView is the only caller of the stub. - nglwidgets' Qt6 branch only processed rme_light_style.qrc; nglresources.qrc (which provides :icons/16x16/ toolbar/window icons) was left as a raw file in the source list and never compiled (CMAKE_AUTORCC is off). Process both qrcs. - LogView never loads libnglwidgets.so at runtime (--as-needed drops it: the code uses no nglwidgets symbols), so its :icons/16x16 resources were never registered for the app. Embed the 20 icons LogView actually uses directly into LogViewResources.qrc with explicit aliases (rcc rejects XML comments in .qrc and, without an alias, registers the full relative path as the resource name).	2026-11-03 13:31:02 +01:00
berrux-dev	0e2100f383	reset Jenkins file	2026-10-15 20:43:46 +02:00
berrux-dev	26f702b7a4	reset jenkins file	2026-10-15 20:40:29 +02:00
berrux-dev	37bd700564	Fixed make error	2026-10-15 12:21:52 +02:00
berrux-dev	684e05109d	Add lcov code coverage to the release pipeline and Jenkins - new_docker_build.sh: new --run-coverage mode (mutually exclusive with --run-jenkins-builder). Instruments the release-scope build with -O0 -g --coverage -fPIC -DNDEBUG (RELEASE flag override keeps -DNDEBUG and -fPIC so behavior and PIC match the green baseline), runs ctest, then collects the lcov report: capture --external -> extract on the four release dirs -> remove test sources -> summary -> genhtml, all with --ignore-errors mismatch,inconsistent,unused (GCC 15 + lcov 2.4). Report lands in --coverage-output-dir (default ./coverage-out): html/index.html, coverage.info, coverage_summary.txt. - Dockerfile image gains lcov via APT_PACKAGES (genhtml ships in the same package). - Jenkinsfile: RunCoverage parameter (default on) + per-OS Coverage stage running the driver on the agent and archiving coverage/<project>/<os>/**. - release-16-10-2026.sh: same coverage step, gated by DRYRUN_COVERAGE (default ON, mirrors the Jenkins default). - README: Step 6 (code coverage) and options/env reference entries. - .gitignore: coverage-out/	2026-10-15 09:00:33 +02:00
berrux-dev	676ae05335	Rewrite the build README without excluded-module sections Scope is now described only as what the release build contains (TetraIF, Z/src, Lts/Common, TrainingAreaBase). All steps (image, compile, tests, DEB packaging, Jenkins) kept and refreshed; the license note is reduced to 'no license file is required'.	2026-10-14 20:40:05 +02:00
berrux-dev	a17b431669	Trim stub header comments and redundant explanations - Drop the 'Stub file ... BUILD_RTI=OFF / Auto-generated' headers from the tab_* and pdm_* stub files (RTI is gone on this branch; the names say it) - Drop stub comments from MockCoordTrans.h and the coordTransTests placeholders - Drop the DDS exclusion list comment from Lts/Common/CMakeLists.txt - Shorten the staging and packages-out comments in new_docker_build.sh	2026-10-14 20:30:09 +02:00
berrux-dev	493893d2e6	Reduce make_rpm_ubuntu26.py line count (925 to 526) without changing behavior - Merge build_single_deb and build_single_deb_nobuild into one build_deb() - Add build_nobuild_package() factory for the 4 no-build packages - Extract run(), prune_dirs() and write_deb_file() helpers - Drop the unreachable release_scope copy branch (all call sites used the full-tree copy; the --release_scope CLI flag is kept) - Trim pipeline_files to the 8 files that actually exist and are packaged - Remove unused imports (configparser, getpass, re, datetime, Path, stat), unused vars (test_patterns, script_extensions) and a duplicated write block	2026-10-14 20:25:51 +02:00
berrux-dev	8976b5aedb	Remove dead CMake configuration from the release validation scope - Top-level CMakeLists.txt: drop RTI/Connext DDS config and placeholder targets, MIGRATE_MODULE guarded-subdir machinery (now unconditional add_subdirectory), BUILD_QAV, BUILD_PLUGINS_*, KDReports stub, ArcGIS option and FindRTI placeholder loop - Lts/CMakeLists.txt: release scope now unconditional (Common + Proxies/TrainingAreaBase), codegen/DDS/test/docs blocks removed - Lts/Common: drop DDS/RTI-gated plugin and utils test blocks - Lts/Proxies/TrainingAreaBase: remove RTI codegen, svcTabClient/svcTabServer, RTI plugins, sTAB; keep stub-only svcTabCommon + tabTelegrams + tabPluginInterface - TetraIF/PrtCnv: remove out-of-scope TetraTestServer/LastTest subdirs - Z/src/nglcompression: remove nglcomp_test (pre-existing Qt6 failure, no longer registered) - Delete 16 unused cmake/ helper modules and the tests/ scaffolding dir - new_docker_build.sh: drop BUILD_ARCGIS and nglcomp_test from the release build - README: update ctest baseline to 7/7 and remove license/exception mentions	2026-10-14 18:39:18 +02:00