Adds new flm and flt migration test suites

qt6-after/qt6-migrated-legatus/CMakeLists.txt

@@ -100,7 +100,6 @@ include_directories(${CMAKE_SOURCE_DIR}/include/ExerciseEventManagement)
 include_directories(${CMAKE_BINARY_DIR}/Lts/Services/ExerciseManagement)
 include_directories(${CMAKE_SOURCE_DIR}/include/ExerciseManagement)
 include_directories(${CMAKE_BINARY_DIR}/Lts/Services/FileManagement)
-include_directories(${CMAKE_SOURCE_DIR}/include/FileManagement)
 include_directories(${CMAKE_BINARY_DIR}/Lts/Services/NotificationManagement)
 include_directories(${CMAKE_SOURCE_DIR}/include/NotificationManagement)
 include_directories(${CMAKE_BINARY_DIR}/Lts/Services/ParticipantManagement)
@@ -124,7 +123,6 @@ include_directories(${CMAKE_BINARY_DIR}/Lts/Common/LtsUtils/LtsUtilsCore)
 include_directories(${CMAKE_SOURCE_DIR}/Z/src/NGLLogger)
 include_directories(${CMAKE_SOURCE_DIR}/include/Viewer/SituationMap)
 include_directories(${CMAKE_SOURCE_DIR}/include/OperatorManagement)
-include_directories(${CMAKE_SOURCE_DIR}/include/FileManagement)
 include_directories(${CMAKE_SOURCE_DIR}/forward-declarations)
 SET(CMAKE_CXX_STANDARD 17)
 SET(CMAKE_CXX_STANDARD_REQUIRED ON)
@@ -255,8 +253,11 @@ if(Qt6Core5Compat_FOUND)
 endif()
 
 # Find Qt6 core components first (without OpenGL which may not be available)
+# WebSockets is required by the migrated services (FileManagement's THP script
+# server uses QWebSocketServer; LtsWebSocket/httq enable their real websocket
+# paths via QT6_WEBSOCKETS_AVAILABLE when the module is found).
 find_package(Qt6 6.2 COMPONENTS Concurrent Core LinguistTools Network
-  Multimedia Sql SerialPort Test Xml Positioning Svg QUIET)
+  Multimedia Sql SerialPort Test Xml Positioning Svg WebSockets QUIET)
 
 if(Qt6_FOUND)
   # Skip GUI find_package - it fails without OpenGL. We'll create manual targets below.
@@ -450,6 +451,21 @@ if(NOT TARGET Qt6::OpenGL)
   message(STATUS "Created stub target for Qt6::OpenGL (library not available)")
 endif()
 
+# Qt6::WebSockets - create manual target if not found (the container's Qt6
+# discovery takes the minimal path, so find_package never creates the
+# component targets). The migrated FileManagement service (THP script
+# server) needs the real module.
+if(NOT TARGET Qt6::WebSockets AND EXISTS "${QT6_LIB_DIR}/libQt6WebSockets.so.6")
+  add_library(Qt6::WebSockets SHARED IMPORTED)
+  set_target_properties(Qt6::WebSockets PROPERTIES
+    IMPORTED_LOCATION "${QT6_LIB_DIR}/libQt6WebSockets.so.6"
+    INTERFACE_INCLUDE_DIRECTORIES "${QT6_INC_DIR}/QtWebSockets;${QT6_INC_DIR}"
+    INTERFACE_LINK_LIBRARIES "Qt6::Core;Qt6::Network"
+  )
+  set(QT6_WEBSOCKETS_REAL_FOUND TRUE)
+  message(STATUS "Manually configured Qt6 WebSockets target")
+endif()
+
 # Stub Qt6::WebSockets target if not available (needed by LtsWebSocket, httq, etc.)
 if(NOT TARGET Qt6::WebSockets)
   add_library(Qt6::WebSockets INTERFACE IMPORTED)
@@ -459,6 +475,14 @@ if(NOT TARGET Qt6::WebSockets)
   message(STATUS "Created stub target for Qt6::WebSockets (library not available)")
 endif()
 
+# The real Qt6 WebSockets module is available (either via find_package or the
+# manual import above): enable the real websocket code paths in httq,
+# LtsWebSocket and the migrated services (they check this macro; without it
+# they fall back to websocket-less operation).
+if(Qt6WebSockets_FOUND OR QT6_WEBSOCKETS_REAL_FOUND)
+  add_compile_definitions(QT6_WEBSOCKETS_AVAILABLE)
+endif()
+
 MESSAGE(STATUS "Qt version is ${Qt6Core_VERSION}, GUI available: ${QT6_GUI_AVAILABLE}")
 
 #

qt6-after/qt6-migrated-legatus/Lts/Common/LtsWebSocket/CMakeLists.txt

@@ -8,8 +8,15 @@
 # --- Library LtsWebSocketCommon --------------------------------------------------------------------------------
 #
 # Make ${Qt6_WebSockets} optional
-if(QT6_GUI_AVAILABLE AND TARGET Qt6::WebSockets)
+# Link the real WebSockets module whenever the websocket code path is
-  set(Qt6_WebSockets ${Qt6_WebSockets})
+# compiled: QT6_WEBSOCKETS_AVAILABLE (root CMakeLists) and the manual
+# Qt6::WebSockets import are set when the real module was found. The old
+# QT6_GUI_AVAILABLE condition never held in this environment (Qt6
+# discovery takes the minimal path) and the Qt6_WebSockets variable was
+# never defined, so the websocket code compiled without the module on
+# the link line.
+if(QT6_WEBSOCKETS_REAL_FOUND OR Qt6WebSockets_FOUND)
+  set(Qt6_WebSockets Qt6::WebSockets)
 else()
   set(Qt6_WebSockets "")
 endif()

qt6-after/qt6-migrated-legatus/Lts/Common/httq/CMakeLists.txt

@@ -1,8 +1,16 @@
 # Modified CMakeLists.txt from github.com/wille-io/httq
 
 # Make ${Qt6_WebSockets} optional
-if(QT6_GUI_AVAILABLE AND TARGET Qt6::WebSockets)
+# Link the real WebSockets module whenever the websocket code path is
-  set(Qt6_WebSockets ${Qt6_WebSockets})
+# compiled: QT6_WEBSOCKETS_AVAILABLE (root CMakeLists) and the manual
+# Qt6::WebSockets import are set when the real module was found. The old
+# QT6_GUI_AVAILABLE condition never held in this environment (Qt6
+# discovery takes the minimal path) and the Qt6_WebSockets variable was
+# never defined, so AbstractServer.cpp compiled the websocket code
+# without the module on the link line (undefined reference to
+# QWebSocketServer::handleConnection).
+if(QT6_WEBSOCKETS_REAL_FOUND OR Qt6WebSockets_FOUND)
+  set(Qt6_WebSockets Qt6::WebSockets)
 else()
   set(Qt6_WebSockets "")
 endif()

qt6-after/qt6-migrated-legatus/Lts/Plugins/FileManagement/CMakeLists.txt

@@ -25,8 +25,8 @@ ADD_INTERFACE_LIBRARY(
 #
 ADD_INTERFACE_LIBRARY(
   FlmDataPluginInterface
-  ${CMAKE_SOURCE_DIR}/include/FileManagement/flm_data_plugin_interface.h
+  ${CMAKE_CURRENT_SOURCE_DIR}/flm_data_plugin_interface.h
-  ${CMAKE_SOURCE_DIR}/include
+  ${CMAKE_CURRENT_SOURCE_DIR}/../../
   DataPluginInterface
   svcFlmCommon
 )

qt6-after/qt6-migrated-legatus/Lts/Services/FileManagement/ModuleTests/flm_tests.cpp

@@ -25,9 +25,9 @@
 
 #include <LtsUtilsCore/pgarray.h>
 #include <LtsUtilsCore/dds_vector.h>
-#include <Lts/Services/FileManagement/flm_ftc.h>
+#include <FileManagement/flm_ftc.h>
-#include <include/FileManagement/flm_dtc.h>
+#include <FileManagement/flm_dtc.h>
-#include <Lts/Services/FileManagement/settings.h>
+#include <FileManagement/settings.h>
 
 /* ----------------------------------------------------------------------------------
  * HOW TO RUN THE TESTS (for example)
@@ -217,9 +217,9 @@ void FlmTests::tryModifyFolder()
   const FileManagement::Folder &fld = m_dtc->folder(m_folderId);
   FileManagement::FolderModifyRequest data;
 
-  DEBUG_LOG(m_logger) << "fld.id() = " << fld.id();
+  DEBUG_LOG(m_logger) << "fld.id() = " << fld.id;
 
-  if (fld.id() == 0)
+  if (fld.id == 0)
   {
     ERROR_LOG(m_logger) << "Cannot find Folder Id = " << m_folderId;
     failExit();
@@ -227,16 +227,16 @@ void FlmTests::tryModifyFolder()
   else
   {
     m_folderId = 0;
-    data.id(fld.id());
+    data.id = fld.id;
-    data.name(fld.name());
+    data.name = fld.name;
-    data.path(fld.path());
+    data.path = fld.path;
-    data.isEditable(fld.isEditable());
+    data.isEditable = fld.isEditable;
-    data.isHidden(fld.isHidden());
+    data.isHidden = fld.isHidden;
-    data.parentId(fld.parentId());
+    data.parentId = fld.parentId;
-    data.operatorId(m_operatorId);
+    data.operatorId = m_operatorId;
 
     // changing only name
-    data.name("Folder-Updated");
+    data.name = "Folder-Updated";
 
     if (!m_ftc->folderModifyRequest(FolderModifyRequest(data), this))
     {
@@ -266,15 +266,15 @@ void FlmTests::tryRemoveFolder()
 int FlmTests::createFolder(int parentFolderId, const QString &folderName, bool isHidden)
 {
   FileManagement::Folder parentFolder = m_dtc->folder(parentFolderId);
-  const std::vector<int32_t> &parentPath = parentFolder.path();
+  const std::vector<int32_t> &parentPath = parentFolder.path;
 
   FileManagement::FolderModifyRequest req;
-  req.name(folderName.toStdString());
+  req.name = folderName.toStdString();
-  req.path(parentPath);
+  req.path = parentPath;
-  req.isEditable(false);
+  req.isEditable = false;
-  req.isHidden(isHidden);
+  req.isHidden = isHidden;
-  req.parentId(parentFolderId);
+  req.parentId = parentFolderId;
-  req.operatorId(m_operatorId);
+  req.operatorId = m_operatorId;
 
   if (!m_ftc->folderModifyRequest(req, this))
   {
@@ -295,20 +295,20 @@ void FlmTests::tryCreateFileContent()
 
   FileContentModifyRequest data;
 
-  data.name("Test Document");
+  data.name = "Test Document";
-  data.isTemplate(false);
+  data.isTemplate = false;
-  data.isUsedBy(false);
+  data.isUsedBy = false;
-  data.usedBy(0);
+  data.usedBy = 0;
-  data.folderId(m_folderId);
+  data.folderId = m_folderId;
-  data.fileStatus(FileManagement::FileStatus::Valid);
+  data.fileStatus = FileManagement::FileStatus::Valid;
-  data.fileCategory(FileManagement::FileCategory::User);   // user docs
+  data.fileCategory = FileManagement::FileCategory::User;   // user docs
-  data.fileType(FileManagement::FileType::MSOfficeDocument);      // doc
+  data.fileType = FileManagement::FileType::MSOfficeDocument;      // doc
-  data.operatorId(m_operatorId);
+  data.operatorId = m_operatorId;
-  data.lastModified(QDateTime::currentMSecsSinceEpoch());
+  data.lastModified = QDateTime::currentMSecsSinceEpoch();
 
   QByteArray vmTest;
   vmTest += "bla-bla-bla";
-  data.content(LtsUtils::convert<std::vector<uint8_t>>(vmTest));
+  data.content = LtsUtils::convert<std::vector<uint8_t>>(vmTest);
 
   m_fileContentId = 0;
   if (!m_ftc->fileContentModifyRequest(data, this))
@@ -318,17 +318,17 @@ void FlmTests::tryCreateFileContent()
   }
   QTRY_VERIFY(m_fileContentId > 0);
 
-  data.name("Test PDF");
+  data.name = "Test PDF";
-  data.isTemplate(false);
+  data.isTemplate = false;
-  data.folderId(m_folderId);
+  data.folderId = m_folderId;
-  data.fileStatus(FileManagement::FileStatus::Valid);
+  data.fileStatus = FileManagement::FileStatus::Valid;
-  data.fileCategory(FileManagement::FileCategory::User);   // user docs
+  data.fileCategory = FileManagement::FileCategory::User;   // user docs
-  data.fileType(FileManagement::FileType::Pdf);      // pdf
+  data.fileType = FileManagement::FileType::Pdf;      // pdf
-  data.operatorId(m_operatorId);
+  data.operatorId = m_operatorId;
-  data.lastModified(QDateTime::currentMSecsSinceEpoch());
+  data.lastModified = QDateTime::currentMSecsSinceEpoch();
 
   vmTest += "\npdf-pdf-pdf";
-  data.content(LtsUtils::convert<std::vector<uint8_t>>(vmTest));
+  data.content = LtsUtils::convert<std::vector<uint8_t>>(vmTest);
 
   m_fileContentId = 0;
   if (!m_ftc->fileContentModifyRequest(data, this))
@@ -338,14 +338,14 @@ void FlmTests::tryCreateFileContent()
   }
   QTRY_VERIFY(m_fileContentId > 0);
 
-  data.name("Test JPG");
+  data.name = "Test JPG";
-  data.isTemplate(false);
+  data.isTemplate = false;
-  data.folderId(m_folderId);
+  data.folderId = m_folderId;
-  data.fileStatus(FileManagement::FileStatus::Valid);
+  data.fileStatus = FileManagement::FileStatus::Valid;
-  data.fileCategory(FileManagement::FileCategory::User);   // user docs
+  data.fileCategory = FileManagement::FileCategory::User;   // user docs
-  data.fileType(FileManagement::FileType::Jpg);
+  data.fileType = FileManagement::FileType::Jpg;
-  data.operatorId(m_operatorId);
+  data.operatorId = m_operatorId;
-  data.lastModified(QDateTime::currentMSecsSinceEpoch());
+  data.lastModified = QDateTime::currentMSecsSinceEpoch();
 
   QString fileName = QLatin1String("/titel_logo_RDE.jpg");
   QFile file;
@@ -359,7 +359,7 @@ void FlmTests::tryCreateFileContent()
   DEBUG_LOG(m_logger) << "Read file " << fileName;
   file.close();
 
-  data.content(LtsUtils::convert<std::vector<uint8_t>>(rawImage));
+  data.content = LtsUtils::convert<std::vector<uint8_t>>(rawImage);
 
   m_fileContentId = 0;
   if (!m_ftc->fileContentModifyRequest(data, this))
@@ -369,14 +369,14 @@ void FlmTests::tryCreateFileContent()
   }
   QTRY_VERIFY(m_fileContentId > 0);
 
-  data.name("Test big JPG");
+  data.name = "Test big JPG";
-  data.isTemplate(false);
+  data.isTemplate = false;
-  data.folderId(m_folderId);
+  data.folderId = m_folderId;
-  data.fileStatus(FileManagement::FileStatus::Valid);
+  data.fileStatus = FileManagement::FileStatus::Valid;
-  data.fileCategory(FileManagement::FileCategory::User);   // user docs
+  data.fileCategory = FileManagement::FileCategory::User;   // user docs
-  data.fileType(FileManagement::FileType::Jpg);
+  data.fileType = FileManagement::FileType::Jpg;
-  data.operatorId(m_operatorId);
+  data.operatorId = m_operatorId;
-  data.lastModified(QDateTime::currentMSecsSinceEpoch());
+  data.lastModified = QDateTime::currentMSecsSinceEpoch();
 
   fileName = QLatin1String("/logo_Project.jpg");
   file.setFileName(QCoreApplication::applicationDirPath()+fileName);
@@ -389,7 +389,7 @@ void FlmTests::tryCreateFileContent()
   DEBUG_LOG(m_logger) << "Read file " << fileName;
   file.close();
 
-  data.content(LtsUtils::convert<std::vector<uint8_t>>(rawImage));
+  data.content = LtsUtils::convert<std::vector<uint8_t>>(rawImage);
 
   m_fileContentId = 0;
   if (!m_ftc->fileContentModifyRequest(data, this))
@@ -411,9 +411,9 @@ void FlmTests::tryModifyFileContent()
   const FileManagement::FileContent &flc = m_dtc->fileContent(m_fileContentId);
   FileManagement::FileContentModifyRequest data;
 
-  DEBUG_LOG(m_logger) << "flc.id() = " << flc.id();
+  DEBUG_LOG(m_logger) << "flc.id() = " << flc.id;
 
-  if (flc.id() == 0)
+  if (flc.id == 0)
   {
     ERROR_LOG(m_logger) << "Cannot find File Content Id = " << m_fileContentId;
     failExit();
@@ -428,29 +428,29 @@ void FlmTests::tryModifyFileContent()
 
     DEBUG_LOG(m_logger) << "Content size = " << m_content.size();
 
-    data.id(flc.id());
+    data.id = flc.id;
-    data.name(flc.name());
+    data.name = flc.name;
-    if (flc.exerciseId().is_set())
+    if (flc.exerciseId.is_set())
     {
-      data.exerciseId(flc.exerciseId().get());
+      data.exerciseId = flc.exerciseId.get();
-      if (flc.phaseId().is_set())
+      if (flc.phaseId.is_set())
-        data.phaseId(flc.phaseId().get());
+        data.phaseId = flc.phaseId.get();
     }
-    data.fileCategory(flc.fileCategory());
+    data.fileCategory = flc.fileCategory;
-    data.fileStatus(flc.fileStatus());
+    data.fileStatus = flc.fileStatus;
-    data.fileType(flc.fileType());
+    data.fileType = flc.fileType;
-    data.folderId(flc.folderId());
+    data.folderId = flc.folderId;
-    data.isTemplate(flc.isTemplate());
+    data.isTemplate = flc.isTemplate;
-    data.isUsedBy(flc.isUsedBy());
+    data.isUsedBy = flc.isUsedBy;
-    data.usedBy(flc.usedBy());
+    data.usedBy = flc.usedBy;
-    data.operatorId(flc.operatorId());
+    data.operatorId = flc.operatorId;
-    data.properties(flc.properties());
+    data.properties = flc.properties;
-    data.content(m_content);
+    data.content = m_content;
 
     // changing only name, template, last modified
-    data.name("Test File Content Updated");
+    data.name = "Test File Content Updated";
-    data.isTemplate(true);
+    data.isTemplate = true;
-    data.lastModified(QDateTime::currentMSecsSinceEpoch());
+    data.lastModified = QDateTime::currentMSecsSinceEpoch();
 
     if (!m_ftc->fileContentModifyRequest(FileContentModifyRequest(data), this))
     {
@@ -466,7 +466,7 @@ void FlmTests::tryModifyFileContent()
 bool FlmTests::checkContentSize(int fileId)
 {
   GetFileContentDataRequest request;
-  request.fileContentId(fileId);
+  request.fileContentId = fileId;
 
   m_content.clear();
   if (!m_ftc->getFileContentDataRequest(request, this))
@@ -490,9 +490,9 @@ void FlmTests::tryUpdateStatus()
   m_dtc->waitForHistoricalDataFileContent();
   const FileManagement::FileContent &flc = m_dtc->fileContent(m_fileContentId);
 
-  DEBUG_LOG(m_logger) << "flc.id() = " << flc.id();
+  DEBUG_LOG(m_logger) << "flc.id() = " << flc.id;
 
-  if (flc.id() == 0)
+  if (flc.id == 0)
   {
     ERROR_LOG(m_logger) << "Cannot find File Content Id = " << m_fileContentId;
     failExit();
@@ -559,18 +559,18 @@ void FlmTests::tryCreatePlan()
 
   FileContentModifyRequest data;
 
-  data.name("Test Plan");
+  data.name = "Test Plan";
-  data.isTemplate(false);
+  data.isTemplate = false;
-  data.folderId(m_folderId);
+  data.folderId = m_folderId;
-  data.fileStatus(FileManagement::FileStatus::Valid);
+  data.fileStatus = FileManagement::FileStatus::Valid;
-  data.fileCategory(FileManagement::FileCategory::Global);   // global
+  data.fileCategory = FileManagement::FileCategory::Global;   // global
-  data.fileType(FileManagement::FileType::TacticalPlan);       // plan
+  data.fileType = FileManagement::FileType::TacticalPlan;       // plan
-  data.operatorId(m_operatorId);
+  data.operatorId = m_operatorId;
-  data.lastModified(QDateTime::currentMSecsSinceEpoch());
+  data.lastModified = QDateTime::currentMSecsSinceEpoch();
 
   QByteArray vmTest;
   vmTest += "bla-bla-bla";
-  data.content(LtsUtils::convert<std::vector<uint8_t>>(vmTest));
+  data.content = LtsUtils::convert<std::vector<uint8_t>>(vmTest);
 
   m_fileContentId = 0;
   if (!m_ftc->fileContentModifyRequest(data, this))
@@ -588,18 +588,18 @@ void FlmTests::tryCreateFav()
 
   FileContentModifyRequest data;
 
-  data.name("Test Fav");
+  data.name = "Test Fav";
-  data.isTemplate(false);
+  data.isTemplate = false;
-  data.folderId(m_folderId);
+  data.folderId = m_folderId;
-  data.fileStatus(FileManagement::FileStatus::Valid);
+  data.fileStatus = FileManagement::FileStatus::Valid;
-  data.fileCategory(FileManagement::FileCategory::User);   // user
+  data.fileCategory = FileManagement::FileCategory::User;   // user
-  data.fileType(FileManagement::FileType::OperatorFavourite);      // fav
+  data.fileType = FileManagement::FileType::OperatorFavourite;      // fav
-  data.operatorId(m_operatorId);
+  data.operatorId = m_operatorId;
-  data.lastModified(QDateTime::currentMSecsSinceEpoch());
+  data.lastModified = QDateTime::currentMSecsSinceEpoch();
 
   QByteArray vmTest;
   vmTest += "bla-bla-bla";
-  data.content(LtsUtils::convert<std::vector<uint8_t>>(vmTest));
+  data.content = LtsUtils::convert<std::vector<uint8_t>>(vmTest);
 
   m_fileContentId = 0;
   if (!m_ftc->fileContentModifyRequest(data, this))
@@ -617,18 +617,18 @@ void FlmTests::tryCreateSymbol()
 
   FileContentModifyRequest data;
 
-  data.name("Test Symbol");
+  data.name = "Test Symbol";
-  data.isTemplate(false);
+  data.isTemplate = false;
-  data.folderId(m_folderId);
+  data.folderId = m_folderId;
-  data.fileStatus(FileManagement::FileStatus::Valid);
+  data.fileStatus = FileManagement::FileStatus::Valid;
-  data.fileCategory(FileManagement::FileCategory::Global);   // global
+  data.fileCategory = FileManagement::FileCategory::Global;   // global
-  data.fileType(FileManagement::FileType::OperatorDefinedSymbol);
+  data.fileType = FileManagement::FileType::OperatorDefinedSymbol;
-  data.operatorId(m_operatorId);
+  data.operatorId = m_operatorId;
-  data.lastModified(QDateTime::currentMSecsSinceEpoch());
+  data.lastModified = QDateTime::currentMSecsSinceEpoch();
 
   QByteArray vmTest;
   vmTest += "bla-bla-bla";
-  data.content(LtsUtils::convert<std::vector<uint8_t>>(vmTest));
+  data.content = LtsUtils::convert<std::vector<uint8_t>>(vmTest);
 
   m_fileContentId = 0;
   if (!m_ftc->fileContentModifyRequest(data, this))
@@ -644,7 +644,7 @@ void FlmTests::tryGetContent()
 {
   GetFileContentDataRequest request;
 
-  request.fileContentId(m_fileContentId);
+  request.fileContentId = m_fileContentId;
   INFO_LOG(m_logger) << "trying to send content request for file Id = " << m_fileContentId;
 
   if (!m_ftc->getFileContentDataRequest(request, this))
@@ -659,16 +659,16 @@ void FlmTests::tryGetContent()
 // ------------------------------------------------------------------------------
 void FlmTests::onGetFileContentDataReply(const GetFileContentDataReply &replyObject)
 {
-  if (replyObject.errorString().size() > 0)
+  if (replyObject.errorString.size() > 0)
   {
-    ERROR_LOG(m_logger) << "Got onGetFileContentDataReply error: " << replyObject.errorString();
+    ERROR_LOG(m_logger) << "Got onGetFileContentDataReply error: " << replyObject.errorString;
     failExit();
   }
 
-  INFO_LOG(m_logger) << "Got reply with id " << replyObject.id()
+  INFO_LOG(m_logger) << "Got reply with id " << replyObject.id
-                     << " and errorString " << replyObject.errorString();
+                     << " and errorString " << replyObject.errorString;
 
-  m_content = replyObject.content();
+  m_content = replyObject.content;
 
   DEBUG_LOG(m_logger) << "Content size: " << m_content.size();
 
@@ -691,7 +691,7 @@ void FlmTests::tryGetAllTemplates()
 
   DEBUG_LOG(m_logger) << "Found " << allTemplates.size() << " templates";
   for (const FileContent &fc : qAsConst(allTemplates))
-    DEBUG_LOG(m_logger) << "Found template (id, name) = (" << fc.id() << ", " << fc.name() << ")";
+    DEBUG_LOG(m_logger) << "Found template (id, name) = (" << fc.id << ", " << fc.name << ")";
 
   QTest::qWait(1000);
 }

qt6-after/qt6-migrated-legatus/Lts/Services/FileManagement/ModuleTests/flm_tests.h

@@ -12,15 +12,15 @@
 
 #pragma once
 
-#include <Lts/Services/FileManagement/flm_ftc.h>
+#include <FileManagement/flm_ftc.h>
-#include <include/FileManagement/flm_dtc.h>
+#include <FileManagement/flm_dtc.h>
-#include <Lts/Services/FileManagement/flm_db.h>
+#include <FileManagement/flm_db.h>
-#include <Lts/Services/FileManagement/flm_db_impl_custom.h>
+#include <FileManagement/flm_db_impl_custom.h>
 #include <FileManagement/flm_ftc_types.h>
 
 #include <DDS/DDSConnector/dds_connector.h>
 
-#include <Lts/Services/FileManagement/logger.h>
+#include <FileManagement/logger.h>
 #include <QtGui/QPixmap>
 #include <ngldb/db_service_handler.h>
 

qt6-after/qt6-migrated-legatus/Lts/Services/FilterManagement/CMakeLists.txt

@@ -7,6 +7,12 @@
 INCLUDE(MacroRTIDDSGen)
 INCLUDE(MacroCodeGenIdl)
 
+# Resolve <DDS/...> includes (generic_data_reader.h, generic_dtc.h, ...) to the
+# real headers under Lts/DDS/ instead of the migration stub tree in include/.
+# Qt5 legacy resolved these the same way; the stub tree shadows them otherwise
+# (it opens namespace DDSGeneric around framework includes and breaks Qt6).
+include_directories(BEFORE ${CMAKE_SOURCE_DIR}/Lts)
+
 SET(xml_FILE flt_service.xml)
 
 #
@@ -19,26 +25,18 @@ SET(SRCS_common
 )
 
 # Generate flt_enums.idl / flt.idl
-IF(BUILD_RTI)
+CODEGEN_IDL_SVC(SRCS_common ${xml_FILE})
-  CODEGEN_IDL_SVC(SRCS_common ${xml_FILE})
-ENDIF()
 # Generate flt_db_impl.cpp/.h, flt_db.h
-IF(BUILD_RTI)
+CODEGEN_DATABASE(SRCS_common ${xml_FILE})
-  CODEGEN_DATABASE(SRCS_common ${xml_FILE})
-ENDIF()
 
 # Generate *.cpp/*.hpp from idl
 RTIDDSGEN(SRCS_common flt_enums.idl)
 RTIDDSGEN(SRCS_common flt.idl)
 
 # Generate flt_dt[s,c]_types.h, flt_ft[s,c]_types.h
-IF(BUILD_RTI)
+CODEGEN_TOPIC_TYPEDEFS(SRCS_common ${xml_FILE})
-  CODEGEN_TOPIC_TYPEDEFS(SRCS_common ${xml_FILE})
-ENDIF()
 # Generate flt_[d|f]tc.h
-IF(BUILD_RTI)
+CODEGEN_CLIENT_TOPICS_IFC(SRCS_common ${xml_FILE})
-  CODEGEN_CLIENT_TOPICS_IFC(SRCS_common ${xml_FILE})
-ENDIF()
 
 NGL_ADD_LIBRARY(AAR SV WS svcFltCommon SHARED  ${SRCS_common})
 NGL_TARGET_INCLUDE_DIRECTORIES(svcFltCommon
@@ -64,9 +62,7 @@ SET(SRCS_client
   flt_export.h
 )
 # generate flt_[d|f]tc.h, flt_[d|f]tc_impl.[cpp|h]
-IF(BUILD_RTI)
+CODEGEN_CLIENT_TOPICS_IMPL(SRCS_client ${xml_FILE})
-  CODEGEN_CLIENT_TOPICS_IMPL(SRCS_client ${xml_FILE})
-ENDIF()
 
 NGL_ADD_LIBRARY(AAR SV WS svcFltClient SHARED ${SRCS_client})
 NGL_TARGET_INCLUDE_DIRECTORIES(svcFltClient
@@ -107,13 +103,9 @@ SET(SRCS_server
   ${xml_FILE}
 )
 # generate flt_[d|f]ts.h, flt_[d|f]ts_impl.[cpp|h]
-IF(BUILD_RTI)
+CODEGEN_SERVER_TOPICS(SRCS_server ${xml_FILE})
-  CODEGEN_SERVER_TOPICS(SRCS_server ${xml_FILE})
-ENDIF()
 # Generate flt.sql, flt.xml
-IF(BUILD_RTI)
+CODEGEN_SQL(SRCS_server ${xml_FILE})
-  CODEGEN_SQL(SRCS_server ${xml_FILE})
-ENDIF()
 
 NGL_ADD_LIBRARY(AAR SV svcFltServer SHARED ${SRCS_server})
 NGL_TARGET_INCLUDE_DIRECTORIES(svcFltServer
@@ -141,9 +133,7 @@ NGL_INSTALL_TARGET(svcFltServer)
 #
 # --- Topic Type Plugin --------------------------------------------------------------
 #
-IF(BUILD_RTI)
+CREATE_TOPIC_TYPE_PLUGIN(${xml_FILE})
-  CREATE_TOPIC_TYPE_PLUGIN(${xml_FILE})
-ENDIF()
 
 #
 # --- Executable -------------------------------------------------

qt6-after/qt6-migrated-legatus/Lts/Services/FilterManagement/dds_handler.cpp

@@ -65,7 +65,7 @@ void DdsHandler::setRunningState(Core::RunningState rs)
   m_pacemaker->setNewState(rs);
 }
 
-void DdsHandler::addPortToPacemaker(quint16 port, Core::PortType type)
+void DdsHandler::addPortToPacemaker(quint16 port, Core::CorePortType type)
 {
   if (!m_pacemaker)
     return;

qt6-after/qt6-migrated-legatus/Lts/Services/FilterManagement/dds_handler.h

@@ -33,7 +33,7 @@ public:
   bool init(const QStringList &qosFileList = QStringList());
 
   void setRunningState(Core::RunningState rs);
-  void addPortToPacemaker(quint16 port, Core::PortType type);
+  void addPortToPacemaker(quint16 port, Core::CorePortType type);
 
   std::shared_ptr<FilterManagement::Interface::Dts> dts() const { return m_ddsDts; }
   std::shared_ptr<FilterManagement::Interface::Fts> fts() const { return m_ddsFts; }

qt6-after/qt6-migrated-legatus/Lts/Services/FilterManagement/handler_aes_filter.cpp

@@ -60,7 +60,7 @@ void HandlerAesFilter::cleanup()
   auto dts = dds()->dts();
   for (auto it = m_aesFilterMap.cbegin(); it != m_aesFilterMap.cend(); ++it)
   {
-    dts->removeAesFilterByKey(it.value()->id());
+    dts->removeAesFilterByKey(it.value()->id);
     delete it.value();
   }
   m_aesFilterMap.clear();
@@ -79,9 +79,9 @@ void HandlerAesFilter::onAesFilterUpdateRequest(const rti::core::SampleIdentity
 Core::FunctionReplyObject HandlerAesFilter::aesFilterUpdateRequest(const AesFilter &request)
 {
   Database::AesFilter dbFilter;
-  dbFilter.operatorId = request.operatorId();
+  dbFilter.operatorId = request.operatorId;
-  dbFilter.content = QString::fromStdString(request.content());
+  dbFilter.content = QString::fromStdString(request.content);
-  dbFilter.ctx = QString::fromStdString(request.ctx());
+  dbFilter.ctx = QString::fromStdString(request.ctx);
 
   const key k(dbFilter.operatorId, dbFilter.ctx);
   auto it = m_aesFilterMap.find(k);
@@ -92,21 +92,21 @@ Core::FunctionReplyObject HandlerAesFilter::aesFilterUpdateRequest(const AesFilt
     if (!db()->insert(dbFilter))
       return Core::FunctionReplyObject(dbFilter.operatorId, tr_lts("dds", "Can not insert AesFilter into database"));
     AesFilter *ptr = new AesFilter(request);
-    ptr->sampleTime(QDateTime::currentMSecsSinceEpoch());
+    ptr->sampleTime = QDateTime::currentMSecsSinceEpoch();
-    ptr->id(dbFilter.id);
+    ptr->id = dbFilter.id;
     m_aesFilterMap.insert(k, ptr);
     it = m_aesFilterMap.find(k);
   }
   else
   {
     // already exists
-    dbFilter.id = it.value()->id();
+    dbFilter.id = it.value()->id;
-    dbFilter.operatorId = it.value()->operatorId();
+    dbFilter.operatorId = it.value()->operatorId;
 
     if (!db()->update(dbFilter))
       return Core::FunctionReplyObject(dbFilter.operatorId, tr_lts("dds", "Error updating AesFilter in database"));
-    it.value()->sampleTime(QDateTime::currentMSecsSinceEpoch());
+    it.value()->sampleTime = QDateTime::currentMSecsSinceEpoch();
-    it.value()->content(request.content());
+    it.value()->content = request.content;
   }
   dds()->dts()->publish(*it.value());
   return Core::FunctionReplyObject();

qt6-after/qt6-migrated-legatus/Lts/Services/FilterManagement/handler_building_component_filter.cpp

@@ -60,7 +60,7 @@ void HandlerBuildingComponentFilter::cleanup()
   auto dts = dds()->dts();
   for (auto it = m_buildingComponentFilterMap.cbegin(); it != m_buildingComponentFilterMap.cend(); ++it)
   {
-    dts->removeBuildingComponentFilterByKey(it.value()->id());
+    dts->removeBuildingComponentFilterByKey(it.value()->id);
     delete it.value();
   }
   m_buildingComponentFilterMap.clear();
@@ -79,9 +79,9 @@ void HandlerBuildingComponentFilter::onBuildingComponentFilterUpdateRequest(cons
 Core::FunctionReplyObject HandlerBuildingComponentFilter::BuildingComponentFilterUpdateRequest(const BuildingComponentFilter &request)
 {
   Database::BuildingComponentFilter dbFilter;
-  dbFilter.operatorId = request.operatorId();
+  dbFilter.operatorId = request.operatorId;
-  dbFilter.content = QString::fromStdString(request.content());
+  dbFilter.content = QString::fromStdString(request.content);
-  dbFilter.ctx = QString::fromStdString(request.ctx());
+  dbFilter.ctx = QString::fromStdString(request.ctx);
 
   const key k(dbFilter.operatorId, dbFilter.ctx);
   auto it = m_buildingComponentFilterMap.find(k);
@@ -92,21 +92,21 @@ Core::FunctionReplyObject HandlerBuildingComponentFilter::BuildingComponentFilte
     if (!db()->insert(dbFilter))
       return Core::FunctionReplyObject(dbFilter.operatorId, tr_lts("dds", "Can not insert BuildingComponentFilter into database"));
     BuildingComponentFilter *ptr = new BuildingComponentFilter(request);
-    ptr->sampleTime(QDateTime::currentMSecsSinceEpoch());
+    ptr->sampleTime = QDateTime::currentMSecsSinceEpoch();
-    ptr->id(dbFilter.id);
+    ptr->id = dbFilter.id;
     m_buildingComponentFilterMap.insert(k, ptr);
     it = m_buildingComponentFilterMap.find(k);
   }
   else
   {
     // already exists
-    dbFilter.id = it.value()->id();
+    dbFilter.id = it.value()->id;
-    dbFilter.operatorId = it.value()->operatorId();
+    dbFilter.operatorId = it.value()->operatorId;
 
     if (!db()->update(dbFilter))
       return Core::FunctionReplyObject(dbFilter.operatorId, tr_lts("dds", "Error updating BuildingComponentFilter in database"));
-    it.value()->sampleTime(QDateTime::currentMSecsSinceEpoch());
+    it.value()->sampleTime = QDateTime::currentMSecsSinceEpoch();
-    it.value()->content(request.content());
+    it.value()->content = request.content;
   }
   dds()->dts()->publish(*it.value());
   return Core::FunctionReplyObject();

qt6-after/qt6-migrated-legatus/Lts/Services/FilterManagement/handler_filter_data_update.cpp

@@ -71,7 +71,7 @@ void HandlerFilterDataUpdate::onFilterDataUpdateRequest(const rti::core::SampleI
 Core::FunctionReplyObject HandlerFilterDataUpdate::filterDataUpdateRequest(const FilterData &request)
 {
   DEBUG_LOG(m_logger) << LOGFUNCTION << " FilterData: " << request;
-  const std::tuple<int,int,int> k(request.operatorId(), request.screenId(), request.screenContainerId());
+  const std::tuple<int,int,int> k(request.operatorId, request.screenId, request.screenContainerId);
   auto it = m_latestFilter.find(k);
   if (it == m_latestFilter.end())
   {
@@ -81,7 +81,7 @@ Core::FunctionReplyObject HandlerFilterDataUpdate::filterDataUpdateRequest(const
     // already exists
     FilterData &currentRef = it.value();
     // compare age:
-    if (currentRef.requestTime() <= request.requestTime())
+    if (currentRef.requestTime <= request.requestTime)
       currentRef = request;
   }
   dds()->dts()->publish(request);

qt6-after/qt6-migrated-legatus/Lts/Services/FilterManagement/handler_symbol_appearance.cpp

@@ -60,7 +60,7 @@ void HandlerSymbolAppearance::cleanup()
   auto dts = dds()->dts();
   for (auto it = m_symbolAppearanceMap.cbegin(); it != m_symbolAppearanceMap.cend(); ++it)
   {
-    dts->removeSymbolAppearanceByKey(it.value()->id());
+    dts->removeSymbolAppearanceByKey(it.value()->id);
     delete it.value();
   }
   m_symbolAppearanceMap.clear();
@@ -79,9 +79,9 @@ void HandlerSymbolAppearance::onSymbolAppearanceUpdateRequest(const rti::core::S
 Core::FunctionReplyObject HandlerSymbolAppearance::symbolAppearanceUpdateRequest(const SymbolAppearance &request)
 {
   Database::SymbolAppearance dbFilter;
-  dbFilter.operatorId = request.operatorId();
+  dbFilter.operatorId = request.operatorId;
-  dbFilter.content = QString::fromStdString(request.content());
+  dbFilter.content = QString::fromStdString(request.content);
-  dbFilter.ctx = QString::fromStdString(request.ctx());
+  dbFilter.ctx = QString::fromStdString(request.ctx);
 
   const key k(dbFilter.operatorId, dbFilter.ctx);
   auto it = m_symbolAppearanceMap.find(k);
@@ -95,24 +95,24 @@ Core::FunctionReplyObject HandlerSymbolAppearance::symbolAppearanceUpdateRequest
       return Core::FunctionReplyObject(dbFilter.operatorId, tr_lts("dds", "Can not insert SymbolAppearanceFilter into database"));
     }
     SymbolAppearance *ptr = new SymbolAppearance(request);
-    ptr->sampleTime(QDateTime::currentMSecsSinceEpoch());
+    ptr->sampleTime = QDateTime::currentMSecsSinceEpoch();
-    ptr->id(dbFilter.id);
+    ptr->id = dbFilter.id;
     m_symbolAppearanceMap.insert(k, ptr);
     it = m_symbolAppearanceMap.find(k);
   }
   else
   {
     // already exists
-    dbFilter.id = it.value()->id();
+    dbFilter.id = it.value()->id;
-    dbFilter.operatorId = it.value()->operatorId();
+    dbFilter.operatorId = it.value()->operatorId;
 
     DEBUG_LOG(m_logger) << "Update symbol filter with id " << dbFilter.id
                         << " for operator " << dbFilter.operatorId;
 
     if (!db()->update(dbFilter))
       return Core::FunctionReplyObject(dbFilter.operatorId, tr_lts("dds", "Error updating SymbolAppearanceFilter in database"));
-    it.value()->sampleTime(QDateTime::currentMSecsSinceEpoch());
+    it.value()->sampleTime = QDateTime::currentMSecsSinceEpoch();
-    it.value()->content(request.content());
+    it.value()->content = request.content;
   }
   dds()->dts()->publish(*it.value());
   return Core::FunctionReplyObject();

qt6-after/qt6-migrated-legatus/Lts/Viewer/LtsFileDialog/CMakeLists.txt

@@ -53,7 +53,6 @@ endif()
 NGL_TARGET_INCLUDE_DIRECTORIES(LtsFileDialog
   PUBLIC
     ${CMAKE_CURRENT_SOURCE_DIR}/../
-    ${CMAKE_SOURCE_DIR}/include/FileManagement/
     ${CMAKE_SOURCE_DIR}/include/OperatorManagement/
 )
 

qt6-after/qt6-migrated-legatus/docker_build.sh

@@ -21,6 +21,10 @@ elif [ "$1" = "ON" ]; then
   BUILD_RTI=ON
 fi
 
+# BUILD_GRANTLEE must be ON: codegen (IDL/DTC/FTC/SQL) generation is required
+# for the migrated services. Only the ON variant is supported and validated.
+BUILD_GRANTLEE="${BUILD_GRANTLEE:-ON}"
+
 # Run CMake configuration and build inside Docker
 docker run --rm \
   -e MIGRATE_PIPELINE_ROOT \
@@ -31,6 +35,11 @@ docker run --rm \
   -v ${MIGRATE_PIPELINE_ROOT}/rti_license.dat:/workspace/rti_license.dat \
   -w /workspace/qt-migration-legatus/qt6-after/qt6-migrated-legatus \
   ubuntu:26.04 bash -c "
+    # Fail the container on any command error and on failing pipeline
+    # stages (the make call below pipes through tee, which would otherwise
+    # mask a non-zero make exit code).
+    set -eo pipefail
+
     apt-get update -qq && \
     apt-get install -y -qq \
       build-essential \
@@ -40,6 +49,7 @@ docker run --rm \
       libqt6gui6 \
       libqt6widgets6 \
       qt6-base-dev \
+      qt6-websockets-dev \
       qt6-tools-dev-tools \
       qt6-tools-dev \
       qt6-l10n-tools \
@@ -65,11 +75,12 @@ docker run --rm \
 
     cmake .. \
       -DBUILD_RTI=${BUILD_RTI} \
+      -DBUILD_GRANTLEE=${BUILD_GRANTLEE} \
       -DBUILD_ARCGIS=OFF \
       -DCMAKE_CXX_STANDARD=17 \
       -DCMAKE_BUILD_TYPE=Release
 
-    make -j8 ddscore ddsftccore ddsQoS ddsconnector ddsfts migration_tests NGLLogger SV nglapplication nglcompression nglcoreapplication ngldb nglguiapplication nglsettings nglsingleapplication nglsinglecoreapplication ngltools ngltranslator nglwidgets qtsingleapplication qtsinglecoreapplication wms_json_ds tcpserver 2>&1 | tee build.log
+    make -j8 ddscore ddsftccore ddsQoS ddsconnector ddsfts migration_tests NGLLogger nglapplication nglcompression nglcoreapplication ngldb nglguiapplication nglsettings nglsingleapplication nglsinglecoreapplication ngltools ngltranslator nglwidgets qtsingleapplication qtsinglecoreapplication wms_json_ds tcpserver svcFileManagement svcFilterManagement flmTests 2>&1 | tee build.log
 
     # Run the CTest unit tests as an explicit validation step.
     # We are already inside build4 (cd build4 above), so --test-dir is the

qt6-after/qt6-migrated-legatus/tests/CMakeLists.txt

@@ -106,12 +106,29 @@ if(BUILD_TESTING)
         endif()
 
         add_executable(migration_tests ${EXISTING_SOURCES})
-        
+
+        # FLM/FLT tests include build-tree generated headers (flm_[dtc|ftc|enums],
+        # flt_[dtc|ftc|enums]) - make sure codegen of these services ran first.
+        if(TARGET svcFlmCommon)
+            add_dependencies(migration_tests svcFlmCommon)
+        endif()
+        if(TARGET svcFltCommon)
+            add_dependencies(migration_tests svcFltCommon)
+        endif()
+
         # Enable Qt Meta-Object Compiler for tests with Q_OBJECT
         set_target_properties(migration_tests PROPERTIES AUTOMOC ON)
         
         target_compile_features(migration_tests PRIVATE cxx_std_17)
         
+        # BEFORE: the root CMakeLists' include_directories() puts include/ early
+        # on the path, so the BUILD_RTI=OFF stub variant of DDS/Generic would
+        # shadow the real DDS framework headers that the generated flm/flt
+        # service headers pull in — same fix the service CMakeLists enforce
+        # with include_directories(BEFORE ${CMAKE_SOURCE_DIR}/Lts).
+        target_include_directories(migration_tests BEFORE PRIVATE
+            ${CMAKE_SOURCE_DIR}/Lts
+        )
         target_include_directories(migration_tests PRIVATE
             ${CMAKE_SOURCE_DIR}
             ${CMAKE_SOURCE_DIR}/include
@@ -121,8 +138,29 @@ if(BUILD_TESTING)
             ${CMAKE_BINARY_DIR}/Lts/Common/LtsTimeline
             ${CMAKE_SOURCE_DIR}/Lts/Common/LtsTimelineClassic
             ${CMAKE_BINARY_DIR}/Lts/Services
+            ${CMAKE_SOURCE_DIR}/Lts/Services
             ${CMAKE_SOURCE_DIR}/Z/src/NGLLogger
         )
+
+        # test_flm_dtc_impl_custom.cpp includes flm_dtc_impl_custom.h, which
+        # pulls in the generated flm_dtc_impl.h. Its include guard requires
+        # MAKE_SVCFLMCLIENT_LIB (defined by NGL_ADD_LIBRARY on svcFlmClient,
+        # which compiles flm_dtc_impl_custom.cpp).
+        target_compile_definitions(migration_tests PRIVATE MAKE_SVCFLMCLIENT_LIB)
+
+        # test_CppTopicGeneratorGrantlee.cpp bootstraps the NGL root logger
+        # before constructing the generator. The <NGLLogger/...> headers
+        # resolve via Z/src, the generated ngllogger_export.h via the
+        # library's binary dir.
+        target_include_directories(migration_tests PRIVATE
+            ${CMAKE_SOURCE_DIR}/Z/src
+            ${CMAKE_BINARY_DIR}/Z/src/NGLLogger
+        )
+
+        # Export-header tests locate generated headers in the build tree.
+        # The directory name is not stable across pipeline stages (build4),
+        # so the path is passed in instead of being hardcoded.
+        target_compile_definitions(migration_tests PRIVATE MIGRATION_TEST_BUILD_DIR="${CMAKE_BINARY_DIR}")
         
         # Link against Qt6 components (Qt6::Test not needed - using gtest)
 if(QT6_GUI_AVAILABLE)
@@ -174,6 +212,17 @@ endif()
         if(TARGET nglwidgets AND QT6_GUI_AVAILABLE)
             target_link_libraries(migration_tests PRIVATE nglwidgets)
         endif()
+
+        # FLM/FLT service tests include the Q_OBJECT custom headers of the
+        # migrated services (flm_db_impl_custom.h, flm_dtc_impl_custom.h).
+        # Their moc output references the generated bases' staticMetaObject
+        # (DatabaseInterface, DtcImpl) defined in the service libraries.
+        if(TARGET svcFlmCommon)
+            target_link_libraries(migration_tests PRIVATE svcFlmCommon)
+        endif()
+        if(TARGET svcFlmClient)
+            target_link_libraries(migration_tests PRIVATE svcFlmClient)
+        endif()
         
         # Link against LtsTimelineClassic only if it exists (may not exist with MIGRATE_MODULE)
         if(TARGET LtsTimelineClassic)

qt6-after/qt6-migrated-legatus/tests/test_CppTopicGeneratorGrantlee.cpp

@@ -1,22 +1,39 @@
 #include "CppTopicGeneratorGrantlee.h"
 
+#include <NGLLogger/NGLLoggerBootstrap.h>
+
 #include <gtest/gtest.h>
 
+namespace
+{
+// GeneratorGrantleeBase acquires its logger from the NGL root logger in its
+// constructor. getNGLRootLogger() throws NotCreatedError as long as no root
+// logger was created, so the test has to bootstrap one first. An empty
+// configuration falls back to WARN logging on stdout ('quiet' suppresses
+// the notice on stderr); 'ignorealreadycreated' keeps repeat calls
+// idempotent across tests of this binary.
+NGL::INGLLogger& ensureRootLogger()
+{
+    return NGL::NGLLoggerBootstrap::createNGLRootLogger(QString(), true, QString(), true);
+}
+} // namespace
+
 // Test that CppTopicGeneratorGrantlee can be instantiated
 TEST(CppTopicGeneratorGrantleeTest, CanInstantiate)
 {
-    CodeGen::CppTopicGeneratorGrantlee generator;
+    ensureRootLogger();
-    // Basic instantiation test - constructor should not throw
+    // Constructor acquires the logger from the root logger and must not throw
-    EXPECT_NO_THROW({ CodeGen::CppTopicGeneratorGrantlee gen2; });
+    EXPECT_NO_THROW({ CodeGen::CppTopicGeneratorGrantlee generator; });
 }
 
 // Test that the generator has expected base class functionality
 TEST(CppTopicGeneratorGrantleeTest, HasLoggerName)
 {
+    ensureRootLogger();
     CodeGen::CppTopicGeneratorGrantlee generator;
-    // The generator should have a logger name set in constructor
+    // The base class created its "CodeGen.CppTopicGeneratorGrantlee" logger
-    // This verifies the base class initialization worked correctly
+    // from the root logger — retrieving that logger must not throw.
-    EXPECT_TRUE(true); // Placeholder - actual test depends on base class API
+    EXPECT_NO_THROW(NGL::NGLLoggerBootstrap::getNGLRootLogger().getNGLLogger("CodeGen.CppTopicGeneratorGrantlee"));
 }
 
 // Test compilation of header dependencies
@@ -26,4 +43,4 @@ TEST(CppTopicGeneratorGrantleeTest, HeaderCompiles)
     // compile correctly with Qt6/C++23
     // Includes: CppTopicGeneratorGrantlee.h, StructBuilder.h, NGLLogger, QCryptographicHash, grantlee/context.h
     EXPECT_TRUE(true); // Compilation itself is the test
-}
+}

qt6-after/qt6-migrated-legatus/tests/test_build_rti_guards.cpp

@@ -3,9 +3,12 @@
  * @brief Tests für BUILD_RTI conditional compilation guards
  *
  * Tests verify that:
- * 1. Code compiles with BUILD_RTI=OFF (fallback mode)
+ * 1. BUILD_RTI is defined as 1 in the validated configuration
- * 2. RTI-dependent code is properly guarded
+ * 2. RTI-dependent code paths are active (BUILD_RTI=ON)
- * 3. Non-RTI code paths work correctly
+ * 3. #if BUILD_RTI guards compile and evaluate correctly
+ *
+ * BUILD_RTI=ON is the only valid migration configuration — the OFF
+ * variant is neither built nor tested.
  */
 
 #include <gtest/gtest.h>
@@ -23,27 +26,25 @@ TEST(BuildRTIGuards, MacroDefined)
 #endif
 }
 
-// Test 2: Verify DDS connector compiles without RTI
+// Test 2: Verify RTI code paths are active in the validated configuration
-TEST(BuildRTIGuards, DDSConnectorFallback)
+TEST(BuildRTIGuards, RtiAvailableInValidatedConfig)
 {
-    // This test verifies that DDS-related headers can be included
+    // The validated migration configuration is BUILD_RTI=ON: the RTI
-    // and basic functionality works without RTI libraries
+    // code paths must be compiled in and available.
-    // The actual DDS connector should have fallback implementations
     bool rti_available = false;
 #ifdef BUILD_RTI
     rti_available = true;
 #endif
-    EXPECT_FALSE(rti_available); // In fallback mode, RTI is not available
+    EXPECT_TRUE(rti_available);
 }
 
 // Test 3: Verify conditional compilation doesn't break build
 TEST(BuildRTIGuards, ConditionalCompilationSafe)
 {
-    // Verify that #if BUILD_RTI guards don't cause syntax errors
+    // Verify that #if BUILD_RTI guards evaluate to the active branch
     int value = 0;
 #if BUILD_RTI
     value = 1;
 #endif
-    // In fallback mode, value should remain 0
+    EXPECT_EQ(value, 1);
-    EXPECT_EQ(value, 0);
 }

qt6-after/qt6-migrated-legatus/tests/test_export_headers.cpp

@@ -5,6 +5,11 @@
  * Tests verify that export headers exist and can be included without errors.
  * Note: Export macros are defined via CMake target_compile_definitions,
  * so we test header existence and structure rather than macro expansion.
+ *
+ * All export headers are generated into the build tree. The build directory
+ * is passed in via the MIGRATION_TEST_BUILD_DIR compile definition (its
+ * name is not stable across pipeline stages), and only headers of targets
+ * that are part of the validated build are checked.
  */
 
 #include <fstream>
@@ -12,6 +17,14 @@
 #include <string>
 #include <vector>
 
+#ifndef MIGRATION_TEST_BUILD_DIR
+#error "MIGRATION_TEST_BUILD_DIR must be defined by tests/CMakeLists.txt"
+#endif
+
+namespace
+{
+const std::string kBuildDir = MIGRATION_TEST_BUILD_DIR;
+
 // Helper to check if file exists and is readable
 bool fileExists(const std::string& path)
 {
@@ -29,32 +42,38 @@ std::string readFile(const std::string& path)
     }
     return std::string((std::istreambuf_iterator<char>(file)), std::istreambuf_iterator<char>());
 }
+} // namespace
 
 // Test 1: nglwidgets_export.h exists
 TEST(ExportHeaders, NglWidgetsExportExists)
 {
-    std::string path = "build/Z/src/nglwidgets/nglwidgets_export.h";
+    std::string path = kBuildDir + "/Z/src/nglwidgets/nglwidgets_export.h";
     EXPECT_TRUE(fileExists(path)) << "Export header not found: " << path;
 }
 
 // Test 2: qtsingleapplication_export.h exists
 TEST(ExportHeaders, QtSingleApplicationExportExists)
 {
-    std::string path = "build/Z/src/QtSingleApplication/qtsingleapplication_export.h";
+    std::string path = kBuildDir + "/Z/src/QtSingleApplication/qtsingleapplication_export.h";
     EXPECT_TRUE(fileExists(path)) << "Export header not found: " << path;
 }
 
 // Test 3: ltssessiondata_export.h exists
 TEST(ExportHeaders, LtsSessionDataExportExists)
 {
-    std::string path = "build/Lts/Common/LtsSession/ltssessiondata_export.h";
+    std::string path = kBuildDir + "/Lts/Common/LtsSession/ltssessiondata_export.h";
     EXPECT_TRUE(fileExists(path)) << "Export header not found: " << path;
 }
 
-// Test 4: svcgmpserver_export.h exists
+// Test 4: ddsconnector_export.h exists
-TEST(ExportHeaders, SvcGmpServerExportExists)
+TEST(ExportHeaders, DdsConnectorExportExists)
 {
-    std::string path = "build/Lts/Services/GuezMinelayerProcessing/svcgmpserver_export.h";
+    // This originally asserted svcgmpserver_export.h (GuezMinelayerProcessing).
+    // That sibling service is not part of this migration and is not built by
+    // the validation pipeline, so its export header is never generated.
+    // ddsconnector is a core dependency of the migrated FileManagement and
+    // FilterManagement services and part of the validated build.
+    std::string path = kBuildDir + "/Lts/DDS/DDSConnector/ddsconnector_export.h";
     EXPECT_TRUE(fileExists(path)) << "Export header not found: " << path;
 }
 
@@ -62,12 +81,15 @@ TEST(ExportHeaders, SvcGmpServerExportExists)
 TEST(ExportHeaders, HaveIncludeGuards)
 {
     std::vector<std::string> headers = {
-        "build/Z/src/nglwidgets/nglwidgets_export.h", "build/Z/src/QtSingleApplication/qtsingleapplication_export.h",
+        kBuildDir + "/Z/src/nglwidgets/nglwidgets_export.h",
-        "build/Lts/Common/LtsSession/ltssessiondata_export.h", "build/Lts/Proxies/ProjectDataManagement/pdm_export.h"};
+        kBuildDir + "/Z/src/QtSingleApplication/qtsingleapplication_export.h",
+        kBuildDir + "/Lts/Common/LtsSession/ltssessiondata_export.h",
+        kBuildDir + "/Lts/DDS/DDSConnector/ddsconnector_export.h"};
 
     for (const auto& header : headers)
     {
         std::string content = readFile(header);
+        EXPECT_FALSE(content.empty()) << "Export header not found: " << header;
         if (!content.empty())
         {
             // Check for #ifndef guard
@@ -83,16 +105,17 @@ TEST(ExportHeaders, HaveIncludeGuards)
 // Test 6: Export macros follow naming convention
 TEST(ExportHeaders, MacroNamingConvention)
 {
-    // Check that export headers follow CMake naming convention
+    // Check that export headers follow CMake naming convention:
-    std::string adlerPath =
+    // <PREFIX>_EXPORT_H guard for target <prefix>
-        "qt-migration-legatus/qt6-after/qt6-migrated-legatus/build/Lts/Plugins/AdlerJson/adler_export.h";
+    std::string connectorPath = kBuildDir + "/Lts/DDS/DDSConnector/ddsconnector_export.h";
-    std::string content = readFile(adlerPath);
+    std::string content = readFile(connectorPath);
 
+    EXPECT_FALSE(content.empty()) << "Export header not found: " << connectorPath;
     if (!content.empty())
     {
-        // Should have ADLER_EXPORT_H guard
+        // Should have DDSCONNECTOR_EXPORT_H guard
-        bool hasCorrectGuard = content.find("#ifndef ADLER_EXPORT_H") != std::string::npos;
+        bool hasCorrectGuard = content.find("#ifndef DDSCONNECTOR_EXPORT_H") != std::string::npos;
-        EXPECT_TRUE(hasCorrectGuard) << "adler_export.h should use ADLER_EXPORT_H guard";
+        EXPECT_TRUE(hasCorrectGuard) << "ddsconnector_export.h should use DDSCONNECTOR_EXPORT_H guard";
     }
 }
 
@@ -100,18 +123,17 @@ TEST(ExportHeaders, MacroNamingConvention)
 TEST(ExportHeaders, ExportAndNoExportMacros)
 {
     std::vector<std::pair<std::string, std::string>> expectedMacros = {
-        {"qt-migration-legatus/qt6-after/qt6-migrated-legatus/build/Lts/Plugins/AdlerJson/adler_export.h", "ADLER"},
+        {kBuildDir + "/Lts/DDS/DDSConnector/ddsconnector_export.h", "DDSCONNECTOR"},
-        {"qt-migration-legatus/qt6-after/qt6-migrated-legatus/build/Lts/Services/PresentationManagement/"
+        {kBuildDir + "/Lts/DDS/FTS/ddsfts_export.h", "DDSFTS"},
-         "svcprecommon_export.h",
+        {kBuildDir + "/Lts/DDS/Core/ddscore_export.h", "DDSCORE"},
-         "SVCPRECOMMON"},
+        // Target LtsSessionData uppercases to LTSSESSIONDATA (LTS + SESSIONDATA),
-        {"qt-migration-legatus/qt6-after/qt6-migrated-legatus/build/Lts/Common/LtsSession/ltssessiondata_export.h",
+        // matching the macros generated in ltssessiondata_export.h.
-         "LTSESSIONDATA"},
+        {kBuildDir + "/Lts/Common/LtsSession/ltssessiondata_export.h", "LTSSESSIONDATA"}};
-        {"qt-migration-legatus/qt6-after/qt6-migrated-legatus/build/Lts/Proxies/ProjectDataManagement/pdm_export.h",
-         "PDM"}};
 
     for (const auto& [header, prefix] : expectedMacros)
     {
         std::string content = readFile(header);
+        EXPECT_FALSE(content.empty()) << "Export header not found: " << header;
         if (!content.empty())
         {
             bool hasExport = content.find(prefix + "_EXPORT") != std::string::npos;
@@ -121,4 +143,4 @@ TEST(ExportHeaders, ExportAndNoExportMacros)
             EXPECT_TRUE(hasNoExport) << header << " should define " << prefix << "_NO_EXPORT";
         }
     }
-}
+}

qt6-after/qt6-migrated-legatus/tests/test_flm_db_impl_custom.cpp

@@ -0,0 +1,75 @@
+/**
+ * @file test_flm_db_impl_custom.cpp
+ * @brief Tests für DatabaseInterfaceImplCustom (flm_db_impl_custom.cpp/.h)
+ *
+ * Die DB-Methoden selbst (updateStatus/setUsedBy) benötigen eine live
+ * Datenbankverbindung und laufen daher nur im Integrationstest flmTests
+ * (docker: make flmTests). Diese Unit-Tests sichern die Qt6-relevante Kopplung
+ * an den generierten Basistyp flm_db_impl.h ab: Klassenhierarchie,
+ * Override-Signaturen und die Enum-Konvertierung (static_cast<int>), die
+ * flm_db_impl_custom.cpp für Status-Vergleich und SQL-Bind verwendet.
+ */
+
+#include <FileManagement/flm_db_impl_custom.h>
+
+#include <gtest/gtest.h>
+#include <type_traits>
+
+/**
+ * @test DatabaseInterfaceImplCustom muss final sein und vom generierten
+ *       DatabaseInterfaceImpl (flm_db_impl.h) erben.
+ */
+TEST(flm_db_impl_custom, CustomClassIsFinalDerivedFromGeneratedBase)
+{
+  static_assert(std::is_final<FileManagement::DatabaseInterfaceImplCustom>::value,
+                "DatabaseInterfaceImplCustom muss final sein");
+  static_assert(std::is_base_of<FileManagement::DatabaseInterfaceImpl,
+                                FileManagement::DatabaseInterfaceImplCustom>::value,
+                "DatabaseInterfaceImplCustom muss von DatabaseInterfaceImpl erben");
+  SUCCEED();
+}
+
+/**
+ * @test Die generierte Basis DatabaseInterfaceImpl ist abstrakt (sie
+ *       implementiert updateStatus/setUsedBy nicht); die Custom-Klasse muss
+ *       durch ihre beiden Overrides konkret sein.
+ */
+TEST(flm_db_impl_custom, OverridesAllPureVirtualMethodsOfGeneratedBase)
+{
+  static_assert(std::is_abstract<FileManagement::DatabaseInterfaceImpl>::value,
+                "generierte Basis muss abstrakt sein");
+  static_assert(!std::is_abstract<FileManagement::DatabaseInterfaceImplCustom>::value,
+                "Custom-Klasse muss alle pure-virtual Methoden überschreiben");
+  SUCCEED();
+}
+
+/**
+ * @test Die Override-Signaturen müssen exakt den Deklarationen in der
+ *       generierten Basis flm_db.h entsprechen (const FileStatus&/const bool&).
+ */
+TEST(flm_db_impl_custom, OverrideSignaturesMatchGeneratedBase)
+{
+  using UpdateStatus =
+      bool (FileManagement::DatabaseInterfaceImplCustom::*)(int, const FileManagement::FileStatus &, int);
+  using SetUsedBy =
+      bool (FileManagement::DatabaseInterfaceImplCustom::*)(int, const bool &, int, int);
+
+  static_assert(std::is_same<UpdateStatus,
+                             decltype(&FileManagement::DatabaseInterfaceImplCustom::updateStatus)>::value,
+                "updateStatus-Signatur muss (int, const FileStatus&, int) sein");
+  static_assert(std::is_same<SetUsedBy,
+                             decltype(&FileManagement::DatabaseInterfaceImplCustom::setUsedBy)>::value,
+                "setUsedBy-Signatur muss (int, const bool&, int, int) sein");
+  SUCCEED();
+}
+
+/**
+ * @test flm_db_impl_custom.cpp vergleicht status gegen FileStatus::Deleted
+ *       bzw. FileStatus::Valid und bindet static_cast<int>(status) an :st —
+ *       die Enum-Werte sind der Vertrag der geänderten Logik.
+ */
+TEST(flm_db_impl_custom, StatusEnumValuesMatchSqlBindConversion)
+{
+  EXPECT_EQ(static_cast<int>(FileManagement::FileStatus::Valid), 0);
+  EXPECT_EQ(static_cast<int>(FileManagement::FileStatus::Deleted), 1);
+}

qt6-after/qt6-migrated-legatus/tests/test_flm_dtc.cpp

@@ -1,16 +1,60 @@
 /**
  * @file test_flm_dtc.cpp
- * @brief Compilation test for FileManagement/flm_dtc.h
+ * @brief Verhaltenstests für die generierte FileManagement Dtc/Ftc-Schnittstelle
  *
- * This test verifies that the migrated header compiles correctly with Qt6/C++23.
+ * Diese Tests prüfen den von CODEGEN_CLIENT_TOPICS_IFC aus flm_service.xml
+ * generierten Header (Lts/Services/FileManagement/flm_dtc.h bzw. flm_ftc.h)
+ * aus dem Build-Tree. Es darf keinen Stub-Header im Quellbaum geben.
  */
 
 #include "FileManagement/flm_dtc.h"
+#include "FileManagement/flm_ftc.h"
 
 #include <gtest/gtest.h>
+#include <QObject>
+#include <type_traits>
 
-TEST(flm_dtc_Compilation, HeaderCompiles)
+/**
+ * @test Der generierte Dtc muss von QObject abgeleitet sein (Signale für Topic-Updates).
+ */
+TEST(flm_dtc_Generated, DtcIsQObjectDerived)
 {
-    // This test verifies that the header compiles without errors
+    static_assert(std::is_base_of<QObject, FileManagement::Interface::Dtc>::value,
+                  "generierter Dtc muss von QObject abgeleitet sein");
+    EXPECT_TRUE(true);
+}
+
+/**
+ * @test Die generierten Identifier müssen dem Service-Namensschema folgen.
+ */
+TEST(flm_dtc_Generated, IdentifiersMatchService)
+{
+    EXPECT_STREQ(FileManagement::Interface::Dtc::identifier(), "FileManagement.Interface.Dtc");
+    EXPECT_STREQ(FileManagement::Interface::Ftc::identifier(), "FileManagement.Interface.Ftc");
+}
+
+/**
+ * @test Die Schnittstellen sind abstrakt und stellen die Topic-Zugriffe aus
+ *       flm_service.xml bereit (Folder, FileContent, ...).
+ */
+TEST(flm_dtc_Generated, TopicInterfacesAreAbstract)
+{
+    using DtcType = FileManagement::Interface::Dtc;
+    using FtcType = FileManagement::Interface::Ftc;
+
+    static_assert(std::is_abstract<DtcType>::value, "Dtc muss abstrakt sein");
+    static_assert(std::is_abstract<FtcType>::value, "Ftc muss abstrakt sein");
+
+    EXPECT_TRUE(true);
+}
+
+/**
+ * @test Include-Guard: mehrfaches Einbinden der generierten Header ist erlaubt.
+ */
+TEST(flm_dtc_Generated, MultipleIncludeGuard)
+{
+// Including the header multiple times should not cause errors
+#include "FileManagement/flm_dtc.h"
+#include "FileManagement/flm_ftc.h"
     EXPECT_TRUE(true);
 }

qt6-after/qt6-migrated-legatus/tests/test_flm_dtc_impl_custom.cpp

@@ -0,0 +1,63 @@
+/**
+ * @file test_flm_dtc_impl_custom.cpp
+ * @brief Tests für DtcImplCustom (flm_dtc_impl_custom.h)
+ *
+ * DtcImplCustom-Instanzen benötigen einen live DDSConnector (Domain
+ * Participant); Verhaltenstests laufen daher nur im Integrationstest flmTests
+ * (docker: make flmTests). Diese Unit-Tests sichern die Qt6-relevante Struktur
+ * ab: Q_OBJECT-Klasse, Vererbung vom generierten Interface::DtcImpl,
+ * Konstruktor-Signatur und die inline Folder-Name-Methoden.
+ */
+
+#include <FileManagement/flm_dtc_impl_custom.h>
+
+#include <gtest/gtest.h>
+#include <type_traits>
+
+/**
+ * @test DtcImplCustom muss final sein, vom generierten Interface::DtcImpl
+ *       erben und (wegen des Q_OBJECT-Makros) QObject-abgeleitet sein —
+ *       moc verifiziert die Klasse beim Bauen von migration_tests.
+ */
+TEST(flm_dtc_impl_custom, IsFinalQObjectDerivedFromGeneratedDtcImpl)
+{
+  static_assert(std::is_final<FileManagement::Interface::DtcImplCustom>::value,
+                "DtcImplCustom muss final sein");
+  static_assert(std::is_base_of<FileManagement::Interface::DtcImpl,
+                                FileManagement::Interface::DtcImplCustom>::value,
+                "DtcImplCustom muss von Interface::DtcImpl erben");
+  static_assert(std::is_base_of<QObject, FileManagement::Interface::DtcImplCustom>::value,
+                "Q_OBJECT erfordert eine QObject-Basis");
+  SUCCEED();
+}
+
+/**
+ * @test Der Konstruktor muss den shared_ptr<DDSConnector::DdsConnector> aus
+ *       der generierten DtcImpl-Basis durchreichen (inherited ctor).
+ */
+TEST(flm_dtc_impl_custom, ConstructorTakesDdsConnector)
+{
+  static_assert(
+      std::is_constructible<FileManagement::Interface::DtcImplCustom,
+                            const std::shared_ptr<DDSConnector::DdsConnector> &>::value,
+      "DtcImplCustom muss aus const std::shared_ptr<DdsConnector>& konstruierbar sein");
+  SUCCEED();
+}
+
+/**
+ * @test Die in flm_dtc_impl_custom.h inline implementierten Folder-Name-
+ *       Formatierungen ("$EX_"/"$PY_"/"$PH_" + Id) müssen als const-Methoden
+ *       mit QString-Rückgabe deklariert sein. (Aufruf braucht eine Instanz
+ *       mit live DDS — siehe Klassenkommentar.)
+ */
+TEST(flm_dtc_impl_custom, InlineFolderNameSignatures)
+{
+  using FileManagement::Interface::DtcImplCustom;
+  static_assert(std::is_same<QString, decltype(std::declval<const DtcImplCustom &>().getExerciseFolderName(1))>::value,
+                "getExerciseFolderName muss const QString(int) sein");
+  static_assert(std::is_same<QString, decltype(std::declval<const DtcImplCustom &>().getPartyFolderName(1))>::value,
+                "getPartyFolderName muss const QString(int) sein");
+  static_assert(std::is_same<QString, decltype(std::declval<const DtcImplCustom &>().getPhaseFolderName(1))>::value,
+                "getPhaseFolderName muss const QString(int) sein");
+  SUCCEED();
+}

qt6-after/qt6-migrated-legatus/tests/test_flm_enums.cpp

@@ -1,16 +1,58 @@
 /**
  * @file test_flm_enums.cpp
- * @brief Compilation test for FileManagement/flm_enums.hpp
+ * @brief Verhaltenstests für die aus flm_service.xml generierten Enums
  *
- * This test verifies that the migrated header compiles correctly with Qt6/C++23.
+ * Diese Tests prüfen die Enum-Werte im generierten Header
+ * (Lts/Services/FileManagement/flm_enums.hpp aus flm_enums.idl via rtiddsgen)
+ * gegen die Definitionen in flm_service.xml. rtiddsgen 7.7 generiert
+ * enum class; Stub-Werte (z. B. FileStatus mit fünf Einträgen) fallen damit auf.
  */
 
 #include "Lts/Services/FileManagement/flm_enums.hpp"
 
 #include <gtest/gtest.h>
 
-TEST(flm_enums_Compilation, HeaderCompiles)
+/**
+ * @test FileStatus: laut flm_service.xml gilt Valid = 0 und Deleted = 1.
+ */
+TEST(flm_enums_Generated, FileStatusValues)
 {
-    // This test verifies that the header compiles without errors
+    EXPECT_EQ(static_cast<int>(FileManagement::FileStatus::Valid), 0);
+    EXPECT_EQ(static_cast<int>(FileManagement::FileStatus::Deleted), 1);
+}
+
+/**
+ * @test FileType: Stichproben aus der Definition in flm_service.xml
+ *       (Unknown = 0, Pdf = 3, AdlerJson = 19).
+ */
+TEST(flm_enums_Generated, FileTypeValues)
+{
+    EXPECT_EQ(static_cast<int>(FileManagement::FileType::Unknown), 0);
+    EXPECT_EQ(static_cast<int>(FileManagement::FileType::Pdf), 3);
+    EXPECT_EQ(static_cast<int>(FileManagement::FileType::AdlerJson), 19);
+}
+
+/**
+ * @test FileCategory und MainFolder: Werte aus flm_service.xml
+ *       (Global = 1, Exercise = 2, User = 3 bzw. GlobalDocuments = 1, ...).
+ */
+TEST(flm_enums_Generated, FileCategoryAndMainFolderValues)
+{
+    EXPECT_EQ(static_cast<int>(FileManagement::FileCategory::Global), 1);
+    EXPECT_EQ(static_cast<int>(FileManagement::FileCategory::Exercise), 2);
+    EXPECT_EQ(static_cast<int>(FileManagement::FileCategory::User), 3);
+
+    EXPECT_EQ(static_cast<int>(FileManagement::MainFolder::GlobalDocuments), 1);
+    EXPECT_EQ(static_cast<int>(FileManagement::MainFolder::ExerciseDocuments), 2);
+    EXPECT_EQ(static_cast<int>(FileManagement::MainFolder::UserDocuments), 3);
+}
+
+/**
+ * @test Include-Guard: mehrfaches Einbinden des generierten Headers ist erlaubt.
+ */
+TEST(flm_enums_Generated, MultipleIncludeGuard)
+{
+// Including the header multiple times should not cause errors
+#include "Lts/Services/FileManagement/flm_enums.hpp"
     EXPECT_TRUE(true);
 }

qt6-after/qt6-migrated-legatus/tests/test_flm_tests.cpp

@@ -0,0 +1,70 @@
+/**
+ * @file test_flm_tests.cpp
+ * @brief Tests für das FLM-Modultest-Fixture (ModuleTests/flm_tests.h/.cpp)
+ *
+ * FlmTests selbst benötigt eine live Datenbank und laufende FLM-Services und
+ * ist als eigenes Executable flmTests angelegt (docker: make flmTests);
+ * flm_tests.cpp definiert main() und die Slot-Implementierungen und kann daher
+ * nicht in migration_tests gelinkt werden. Diese Unit-Tests sichern stattdessen
+ * den Compile-Vertrag des Fixtures ab: dieselben Qt5-Include-Pfade wie in
+ * flm_tests.h (generierte flm_*-Header, DDSConnector, ngldb) und die
+ * Fixture-typische DbHandler-Instanziierung mit dem generierten
+ * DatabaseInterface.
+ */
+
+#include <FileManagement/flm_ftc.h>
+#include <FileManagement/flm_dtc.h>
+#include <FileManagement/flm_db.h>
+#include <FileManagement/flm_db_impl_custom.h>
+#include <FileManagement/flm_ftc_types.h>
+
+#include <DDS/DDSConnector/dds_connector.h>
+
+#include <FileManagement/logger.h>
+#include <ngldb/db_service_handler.h>
+
+#include <gtest/gtest.h>
+#include <type_traits>
+
+/**
+ * @test flm_tests.h typedef'iert DbHandler = NGLDB::DbServiceHandler<DatabaseInterface>
+ *       — diese Instanziierung muss mit dem generierten DatabaseInterface
+ *       kompilieren (Template vollständig instanziierbar).
+ */
+TEST(flm_tests, DbHandlerInstantiatesWithGeneratedDatabaseInterface)
+{
+  using DbHandler = NGLDB::DbServiceHandler<FileManagement::DatabaseInterface>;
+  static_assert(std::is_class<DbHandler>::value,
+                "NGLDB::DbServiceHandler<FileManagement::DatabaseInterface> muss eine Klasse sein");
+  SUCCEED();
+}
+
+/**
+ * @test FlmTests erbt (protected) von genau diesen sechs Ftc-ReplyHandlern —
+ *       sie müssen über <FileManagement/flm_ftc.h> vollständig vorliegen.
+ */
+TEST(flm_tests, FtcReplyHandlerBasesAreComplete)
+{
+  using namespace FileManagement::Interface;
+  static_assert(std::is_class<Ftc::FolderModifyReplyHandler>::value, "FolderModifyReplyHandler fehlt");
+  static_assert(std::is_class<Ftc::FolderRemoveReplyHandler>::value, "FolderRemoveReplyHandler fehlt");
+  static_assert(std::is_class<Ftc::FileContentModifyReplyHandler>::value, "FileContentModifyReplyHandler fehlt");
+  static_assert(std::is_class<Ftc::FileContentRemoveReplyHandler>::value, "FileContentRemoveReplyHandler fehlt");
+  static_assert(std::is_class<Ftc::FileContentExportReplyHandler>::value, "FileContentExportReplyHandler fehlt");
+  static_assert(std::is_class<Ftc::GetFileContentDataReplyHandler>::value, "GetFileContentDataReplyHandler fehlt");
+  SUCCEED();
+}
+
+/**
+ * @test Der von FlmTests::init verwendete Dtc muss die Factory-Methode
+ *       create(const std::shared_ptr<DdsConnector>&) bereitstellen.
+ */
+TEST(flm_tests, DtcCreateFactorySignature)
+{
+  static_assert(
+      std::is_same<std::shared_ptr<FileManagement::Interface::Dtc> (*)(
+                      const std::shared_ptr<DDSConnector::DdsConnector> &),
+                   decltype(&FileManagement::Interface::Dtc::create)>::value,
+      "Dtc::create muss (const std::shared_ptr<DdsConnector>&) -> shared_ptr<Dtc> sein");
+  SUCCEED();
+}

qt6-after/qt6-migrated-legatus/tests/test_flt_dtc.cpp

@@ -0,0 +1,60 @@
+/**
+ * @file test_flt_dtc.cpp
+ * @brief Verhaltenstests für die generierte FilterManagement Dtc/Ftc-Schnittstelle
+ *
+ * Diese Tests prüfen den von CODEGEN_CLIENT_TOPICS_IFC aus flt_service.xml
+ * generierten Header (Lts/Services/FilterManagement/flt_dtc.h bzw. flt_ftc.h)
+ * aus dem Build-Tree. Es darf keinen Stub-Header im Quellbaum geben.
+ */
+
+#include "FilterManagement/flt_dtc.h"
+#include "FilterManagement/flt_ftc.h"
+
+#include <gtest/gtest.h>
+#include <QObject>
+#include <type_traits>
+
+/**
+ * @test Der generierte Dtc muss von QObject abgeleitet sein (Signale für Topic-Updates).
+ */
+TEST(flt_dtc_Generated, DtcIsQObjectDerived)
+{
+    static_assert(std::is_base_of<QObject, FilterManagement::Interface::Dtc>::value,
+                  "generierter Dtc muss von QObject abgeleitet sein");
+    EXPECT_TRUE(true);
+}
+
+/**
+ * @test Die generierten Identifier müssen dem Service-Namensschema folgen.
+ */
+TEST(flt_dtc_Generated, IdentifiersMatchService)
+{
+    EXPECT_STREQ(FilterManagement::Interface::Dtc::identifier(), "FilterManagement.Interface.Dtc");
+    EXPECT_STREQ(FilterManagement::Interface::Ftc::identifier(), "FilterManagement.Interface.Ftc");
+}
+
+/**
+ * @test Die Schnittstellen sind abstrakt und stellen die Topic-Zugriffe aus
+ *       flt_service.xml bereit.
+ */
+TEST(flt_dtc_Generated, TopicInterfacesAreAbstract)
+{
+    using DtcType = FilterManagement::Interface::Dtc;
+    using FtcType = FilterManagement::Interface::Ftc;
+
+    static_assert(std::is_abstract<DtcType>::value, "Dtc muss abstrakt sein");
+    static_assert(std::is_abstract<FtcType>::value, "Ftc muss abstrakt sein");
+
+    EXPECT_TRUE(true);
+}
+
+/**
+ * @test Include-Guard: mehrfaches Einbinden der generierten Header ist erlaubt.
+ */
+TEST(flt_dtc_Generated, MultipleIncludeGuard)
+{
+// Including the header multiple times should not cause errors
+#include "FilterManagement/flt_dtc.h"
+#include "FilterManagement/flt_ftc.h"
+    EXPECT_TRUE(true);
+}

qt6-after/qt6-migrated-legatus/tests/test_flt_enums.cpp

@@ -0,0 +1,32 @@
+/**
+ * @file test_flt_enums.cpp
+ * @brief Verhaltenstests für die aus flt_service.xml generierten Enums
+ *
+ * Diese Tests prüfen die Enum-Werte im generierten Header
+ * (Lts/Services/FilterManagement/flt_enums.hpp aus flt_enums.idl via rtiddsgen)
+ * gegen die Definitionen in flt_service.xml. rtiddsgen 7.7 generiert
+ * enum class.
+ */
+
+#include "Lts/Services/FilterManagement/flt_enums.hpp"
+
+#include <gtest/gtest.h>
+
+/**
+ * @test DummyEnum: laut flt_service.xml gilt val1 = 1 und val2 = 2.
+ */
+TEST(flt_enums_Generated, DummyEnumValues)
+{
+    EXPECT_EQ(static_cast<int>(FilterManagement::DummyEnum::val1), 1);
+    EXPECT_EQ(static_cast<int>(FilterManagement::DummyEnum::val2), 2);
+}
+
+/**
+ * @test Include-Guard: mehrfaches Einbinden des generierten Headers ist erlaubt.
+ */
+TEST(flt_enums_Generated, MultipleIncludeGuard)
+{
+// Including the header multiple times should not cause errors
+#include "Lts/Services/FilterManagement/flt_enums.hpp"
+    EXPECT_TRUE(true);
+}

qt6-after/qt6-migrated-legatus/tests/test_qt6_api_migrations.cpp

@@ -50,8 +50,11 @@ TEST(Qt6ApiMigrations, QStringViewBasic)
     QStringView subView = view.mid(6, 4); // "Qt6 "
     EXPECT_EQ(subView.toString(), QStringLiteral("Qt6 "));
 
-    // Test that view doesn't allocate memory
+    // Test that view doesn't allocate memory: QStringView is a non-owning
-    EXPECT_EQ(view.data(), original.data());
+    // view onto the original's buffer. Note: the non-const QString::data()
+    // detaches the shared QString (copy-on-write) and would move the buffer,
+    // so the comparison has to use the const overload (constData()).
+    EXPECT_EQ(view.data(), original.constData());
 }
 
 // Test 2: QStringView with function parameters