Initial commit

Lts/Viewer/SituationMap/Map/situation_map_ahtc_tablet.ini

@@ -0,0 +1,129 @@
+# $Id$
+# $HeadURL$
+# $Author$
+
+[license]
+licenseString = "runtimestandard,1000,rud000004959,none,7RC63PJPXJPH003AD234" ;# Bayanat Helpdesk, 21.07.2019
+
+1\extensionString = ""
+size=0
+
+[esriNetworkCache]
+enabled = 1                                               ;# enabled: 1=on ; 0=off, since V100.7.0
+
+[symbology]
+type = "APP6D"                                            ;# None | MIL2525D | MIL2525C | APP6B | APP6D
+extraSymbols = ":/advancedSymbology/CivilSymbols"         ;# ':/advancedSymbology/CivilSymbols'
+
+[mapUrls]
+#For on-site - windows
+1\url = "file:AHTC_2019_06_17_AHTC_CTC_Topo_2016_32639/AHTC_CTC_Topogaphic#-1:125"
+1\name = "AHTC Topographic"
+2\url ="file:AHTC_2019_06_17_AHTC_CTC_Aerial_2016_32639/AHTC_CTC_Aerial#-1:125"
+2\name = "AHTC Aerial"
+3\url = "file:AHTC_AlHamra_Aerial_0m21_PreDelivery_32639/Al Hamra Aerial 0m21#-1:125"
+3\name = "AlHamra Aerial"
+size=3
+
+basemapLayernamePrefix = ""             ;# default: "ArcGISTiledLayer_URL_"
+
+# For debugging only:
+# an non-empty value will overwrite/skip the mapUrls:
+#localMapFile = "Topographic.tpk"                       ;# empty (if so, try 'Topographic.tpk')
+# : For debugging only
+
+
+
+[sceneUrls]
+#For on-site - windows
+1\url = "file:AHTC_2019_06_17_AHTC_CTC_Topo_2016_WebMerc/AHTC_CTC_Topogaphic#-1:125"
+1\name = "AHTC Topographic"
+2\url = "file:AHTC_2019_06_17_AHTC_CTC_Aerial_2016_WebMerc/AHTC_CTC_Aerial#-1:125"
+2\name = "AHTC Aerial"
+3\url = "file:AHTC_AlHamra_Aerial_0m21_PreDelivery_WebMerc/Al Hamra Aerial 0m21#-1:125"
+3\name = "AlHamra Aerial"
+4\url = "file:2022-05-23_AHTC-Bridges_ret_geotifcp-alex.tif#-1:125"                                               ;# according SPD-slpk with bridges
+4\name = "AlHamra Aerial NoBridges"
+size=4
+
+[sceneObjectUrls]
+#             1\url = "URL[#<altitudeOffset>]"
+#Example: >>> 1\url = "file:AHTC_LOW.slpk#0.3" <<<
+1\url = "file:AHTC_LOW.slpk#0.5"
+size=1
+
+[elevationUrls]
+1\url = "file:Elevation.tif"                                                    ;# BFE, ~30m
+2\url = "file:AHTC_utm_dgm_surface_wgs84.tif"                                   ;# Z&M, XY converted to WGS84 (ArcGIS Pro)
+size=2
+
+
+[operationalLayer]
+# "<Layername>:<Static|Dynamic>:<Draped|Absolute|Relative>"
+1\operationalLayer = "Buildings:Dynamic:Relative"              ;# Dynamic to avoid flicker at 3D if selection changes (MapObjectSelectionWidget)
+2\operationalLayer = "TechnicalAreas:Dynamic:Draped"           ;# TechnicalArea@AES (MOUTArea), TrainingArea, ShootBackArea
+3\operationalLayer = "MountingPoints:Dynamic:Absolute"
+4\operationalLayer = "IEDs:Dynamic:Relative"
+5\operationalLayer = "BuildingOwnership:Dynamic:Relative"      ;# keep ExtrusionMode (AbsoluteHeight) in mind
+6\operationalLayer = "AES:Dynamic:Draped"
+7\operationalLayer = "Participants:Dynamic:Relative"
+8\operationalLayer = "Participants_1:Dynamic:Relative"
+9\operationalLayer = "Participants_2:Dynamic:Relative"
+10\operationalLayer = "Participants_3:Dynamic:Relative"
+11\operationalLayer = "Participants_4:Dynamic:Relative"
+12\operationalLayer = "Participants_5:Dynamic:Relative"
+size=12
+
+participantLayername = "Participants:Dynamic:Relative"         ;# default: "Participants:Dynamic:Relative"
+
+operationalLayerForCubes = "BuildingOwnership"                 ;# must match with an operationalLayer
+
+
+[map]
+
+# full mgrs coordinate
+# East;North
+#center = "32UMD9307078331"               ;#QPointF(93070, 78331) -> BT56 - Bremen
+center = "32UPD7671618433"               ;#QPointF(76716, 18433) -> BT39 (Schulgebaeude2b) - Schnoeggersburg
+center = "39RXG4344459777"
+
+zoomFactorBase = 1.0015                 ;# to configure mouse wheel for zooming, only values greater 1 and lower 1.1 will be accepted
+
+initialScale = 4000                    ;# 90000 -> Bremen ; 7000000 -> NorthGermany
+
+# scaleMin and scaleMax (of map!) may be overwritten, if a layer is loaded manually -> to rethink
+scaleMin = -1                           ;# big value   (e.g. 10000000) limiting zoomOut  1:10000000 -> 0.0000001
+scaleMax = -1                           ;# small value (e.g. 1000)     limiting zoomIn   1:1000     -> 0.001
+
+scaleHasVisibility = 70000              ;# zoom out -> some objects disappear to not overload the map
+
+gridType = "MGRS"                       ;# Grid: NoType, MGRS, UTM, USGN, LatLon
+
+animationDuration = 0.5                 ;# default -> 0.5 (0< 0 -> off)
+rocketDuration = 2.0                    ;# default -> 2.0
+
+
+[widgets]
+addMapWidgets = 1
+addSideBar    = 1
+
+[viewshed]
+# // arcgisonline -> only demo (keep proxy in mind!)
+viewshedUrl = "http://sampleserver1.arcgisonline.com/ArcGIS/rest/services/Elevation/ESRI_Elevation_World/GPServer/Viewshed" ;# // only demo!!!
+
+
+[rubberband]
+drawColor         = "#00406e"           ;# Color settings of rubberband
+fillColor         = "#007eC0"
+handleDrawColor   = "#00406e"           ;# Outline color of handles
+handleFillColor   = "#00406e"           ;# fill color of handles
+selectionColor    = "red"               ;# fill or draw color if handle is selected
+frameColor        = "#00406e"           ;# outline color of frame handle (bounding box)
+frameFillColor    = "#5043b0e0"         ;# fill color of frame handle (bounding box)
+frameHandleMargin = 0                   ;# Margin of frame handle in pixel
+previewOffset     = @Point(32 32)       ;# Offset of preview icon to mouse position
+previewSize       = 32                  ;# Size of preview icon
+pickingRatio      = 8                   ;# Size of rubberband point handles
+lineHandleWidth   = 4                   ;# Size of rubberband line handles
+
+# to be continued