Initial commit

Lts/Viewer/SituationMap/Map/situation_map_guez_tablet.ini

@@ -0,0 +1,136 @@
+# $Id$
+# $HeadURL$
+# $Author$
+
+[license]
+licenseString = "runtimestandard,1000,rud000189203,none,FAYRMD17J18S6HAZ4078" ;# V100.2.1, provided by Mr. Steinicke (ESRI), 23.03.2018
+
+1\extensionString = "Exten1"
+size=0
+
+[esriNetworkCache]
+enabled = 1                                               ;# enabled: 1=on ; 0=off, since V100.7.0
+
+[symbology]
+type = "APP6D"                                            ;# None  MIL2525D  MIL2525C  APP6B  APP6D
+extraSymbols = ":/advancedSymbology/CivilSymbols"         ;# ':/advancedSymbology/CivilSymbols'
+
+
+[mapUrls]
+#For on-site - windows
+1\url = "file:Guez_Topo_32632_guez_topo_32632/Guez Topographic#-1:125"
+1\name = "Guez Topographic"
+2\url = "file:Guez_Aerial_32632_Guez_Aerial_32632/Guez Aerial#-1:125"
+2\name = "Guez Aerial"
+3\url = "file:Guez_HotSpots_Salchau_Aerial_0m20_2017_32632#-1:125"
+3\name = "HotSpots Salchau Aerial"
+4\url = "file:Guez_HotSpots_Schnoeggersburg_Aerial_0m20_2017_32632#-1:125"
+4\name = "HotSpots Schnoeggersburg Aerial"
+size=4
+
+
+basemapLayernamePrefix = ""             ;# default: "ArcGISTiledLayer_URL_"
+
+# For debugging only:
+# an non-empty value will overwrite/skip the mapUrls:
+#localMapFile = "Topographic.tpk"                       ;# empty (if so, try 'Topographic.tpk')
+# : For debugging only
+
+
+
+[sceneUrls]
+
+#For on-site - windows
+1\url = "file:Guez_Topo_WebMerc_Guez_Topo_WebMerc/Guez Topographic#-1:125"
+1\name = "Guez Topographic"
+2\url = "file:Guez_Aerial_WebMerc_Guez_Aerial_WebMerc/Guez Aerial#-1:125"
+2\name = "Guez Aerial"
+3\url = "file:Guez_HotSpots_Salchau_Aerial_0m20_2017_WebMerc#-1:125"
+3\name = "HotSpots Salchau Aerial"
+4\url = "file:Guez_HotSpots_Schnoeggersburg_Aerial_0m20_2017_WebMerc#-1:125"
+4\name = "HotSpots Schnoeggersburg Aerial"
+size=4
+
+
+[sceneObjectUrls]
+1\url = "file:GUEZ_BA1_EPSG3857_20181106.slpk"
+size=1
+
+[elevationUrls]
+1\url = "file:Altmark_dt1.tif"                                                                                        ;# Altmark.dt1 -> Letzlingen, ??m
+size=1
+
+
+[operationalLayer]
+# "<Layername>:<Static|Dynamic>:<Draped|Absolute|Relative>"
+1\operationalLayer = "Buildings:Dynamic:Relative"              ;# Dynamic to avoid flicker at 3D if selection changes (MapObjectSelectionWidget)
+2\operationalLayer = "TechnicalAreas:Dynamic:Draped"           ;# TechnicalArea@AES (MOUTArea), TrainingArea, ShootBackArea
+3\operationalLayer = "MountingPoints:Dynamic:Absolute"
+4\operationalLayer = "IEDs:Dynamic:Relative"
+5\operationalLayer = "BuildingOwnership:Dynamic:Relative"      ;# keep ExtrusionMode (AbsoluteHeight) in mind
+6\operationalLayer = "AES:Dynamic:Draped"
+7\operationalLayer = "AESCentral:Dynamic:Draped"               ;# 3D-AreaEffectSimulation, draped, SubLayer 'GraphicsLayer_3D_Absolute' is absolute
+8\operationalLayer = "Participants:Dynamic:Relative"
+9\operationalLayer = "Participants_1:Dynamic:Relative"
+10\operationalLayer = "Participants_2:Dynamic:Relative"
+11\operationalLayer = "Participants_3:Dynamic:Relative"
+12\operationalLayer = "Participants_4:Dynamic:Relative"
+13\operationalLayer = "Participants_5:Dynamic:Relative"
+size=13
+
+participantLayername = "Participants:Dynamic:Relative"         ;# default: "Participants:Dynamic:Relative"
+
+operationalLayerForCubes = "BuildingOwnership"                 ;# must match with an operationalLayer
+
+
+[map]
+
+# full mgrs coordinate
+# East;North
+center = "32UPD7400013000"               ;#QPointF(93070, 78331) -> BT56 - Bremen
+zoomFactorBase = 1.0015                 ;# to configure mouse wheel for zooming, only values greater 1 and lower 1.1 will be accepted
+
+initialScale = 90000                    ;# 90000 -> Bremen ; 7000000 -> NorthGermany
+
+# scaleMin and scaleMax (of map!) may be overwritten, if a layer is loaded manually -> to rethink
+scaleMin = -1                           ;# big value   (e.g. 10000000) limiting zoomOut  1:10000000 -> 0.0000001
+scaleMax = -1                           ;# small value (e.g. 1000)     limiting zoomIn   1:1000     -> 0.001
+
+scaleHasVisibility = 70000              ;# zoom out -> some objects disappear to not overload the map
+
+gridType = "MGRS"                       ;# Grid: NoType, MGRS, UTM, USGN, LatLon
+
+animationDuration = 0.5                 ;# default -> 0.5 (0< 0 -> off)
+rocketDuration = 2.0                    ;# default -> 2.0
+
+
+[widgets]
+addMapWidgets = 1
+addSideBar    = 1
+
+[viewshed]
+# // arcgisonline -> only demo (keep proxy in mind!)
+#viewshedUrl = "http://sampleserver1.arcgisonline.com/ArcGIS/rest/services/Elevation/ESRI_Elevation_World/GPServer/Viewshed" ;# // only demo!!!
+viewshedUrl = "" ;# // SightFan -> not necessary
+
+
+[rubberband]
+drawColor         = "#00406e"           ;# Color settings of rubberband
+fillColor         = "#007eC0"
+handleDrawColor   = "#00406e"           ;# Outline color of handles
+handleFillColor   = "#00406e"           ;# fill color of handles
+selectionColor    = "red"               ;# fill or draw color if handle is selected
+frameColor        = "#00406e"           ;# outline color of frame handle (bounding box)
+frameFillColor    = "#5043b0e0"         ;# fill color of frame handle (bounding box)
+frameHandleMargin = 0                   ;# Margin of frame handle in pixel
+previewOffset     = @Point(32 32)       ;# Offset of preview icon to mouse position
+previewSize       = 32                  ;# Size of preview icon
+pickingRatio      = 8                   ;# Size of rubberband point handles
+lineHandleWidth   = 4                   ;# Size of rubberband line handles
+
+# to be continued
+
+
+
+
+