Enumerated choice of an absolute Coordinate or point graphic as a location reference The formation of air (aviation) elements Enumerated values for the base affiliation of FRIEND, HOSTILE, NEUTRAL, and UNKNOWN. The text modifier for units and installations that indicates unit effectiveness or installation capability. 85 percent or greater strength (combat capable) 70 to 84 percent strength (combat capable with minor deficiencies) 50 to 69 percent strength (combat ineffective, unit has major losses or deficiencies) Less than 50 percent strength (requires reconstitution before next mission) Not applicable or no information available Enumerated choice for the type of command under which the unit has been task organized as taken from FM 100-7 'The Army In Theater Operations' The typical list of Communications Net Types for Army Units. The typical list of Communications Net Types for Army Units. Data Transfer. Facsimile. Identify Friend or Foe. Image. MCI. Message Handling Service. Tactical Data Link. Video Service. Voice Service. Not Otherwise Specified Enumerated choice for the type of coordinate as MGRS, UTM, GCC, and GCS. Graphic modifier that identifies Command level. Enumerated choice for the type of owning organization as a force or unit. Enumerated choice for the method used to correlate formation to location as cetner of mass or lead element. The unit location represents the location of the formation's lead element, identified by a formation order of 1. The unit location represents the location of the geographical center. Enumerated choice for The type of formation being Ground, Air, Surface or Subsurface This is the ground formation from which subordinate elements are placed in formation. Military domain for the scenario of ACR, RDA, and TEMO. Enumeration indicating the level of fidelity appropriate for instancing the unit or equipment in the simulation No resolution/representation of the unit or equipment is neccesary to achieve scenario objectives. Minimal resolution representation (graphical display only, no behaviors) of the unit or equipment is necessary to achieve scenario objectives. This resolution typically applies to elements that are displayed as part of the common operating picture, but have not direct impact on scenario objectives. Standard (low) resolution representation of the unit or equipment necessary to achieve scenario objectives. This resolution typically applies to elements that are two or more echelons above, below or adjacient to the principle planning unit. Enhanced (medium) resolution representation of the unit or equipment necessary to achieve scenario objectives. This resolution typically applies to elements that are within two echelons of the principle planning unit. High resolution representation of the unit or equipment necessary to achieve scenario objectives. This resolution typically applies to elements that are within one echelon of the principle planning unit. No resolution has been specified for the unit or equipment. Unit specific status of Mission Oriented Protective Posture None of the protective clothing and equipment is worn, but it is readily available. The overgarment and helmet cover are worn. TBD. Chemical protective mask and hood are added. At this point personnel are completely encapsulated. Butyl rubber gloves are added. Orientation of the graphic to the right or left as defined in the symbology standard Orientation of the point graphic is 90 degress to the right. Orientation of the point graphic is 90 degress to the left. A specific overlay used in the scenario, that is then referenced by the control measures that are to be included on the overlay The graphic modifier in a unit symbol that displays (+) for reinforced, (-) for reduced, (±) for reinforced and reduced. This is the subsurface formation from which subordinate elements are placed in formation The support relationship of this unit with respect to the unit being supported The support role taken from classes of Priority of Effort being Chemical, Engineer, Fires, and Intelligence This is the surface formation from which subordinate elements are placed in formation Enumerated choice for the class of symbology modifiers. Enumerated choice for the type of symbology standandard. Degree of fire control, values include free, tight, and hold. Weapons systems may be fired at any target not positively recognized as friendly. Weapons systems may only be fired in self-defense or in response to a formal order. Weapons systems may be fired only at targets recognized as hostile.