# $Id$
# $HeadURL$
# $Author$

[license]
licenseString = "runtimestandard,1000,rud000189203,none,FAYRMD17J18S6HAZ4078" ;# V100.2.1, provided by Mr. Steinicke (ESRI), 23.03.2018

1\extensionString = "Exten1"
size=0

[esriNetworkCache]
enabled = 1                                               ;# enabled: 1=on ; 0=off, since V100.7.0

[symbology]
type = "APP6D"                                            ;# None  MIL2525D  MIL2525C  APP6B  APP6D
extraSymbols = ":/advancedSymbology/CivilSymbols"         ;# ':/advancedSymbology/CivilSymbols'


[mapUrls]
#For on-site - windows
1\url = "file:Guez_Topo_32632_guez_topo_32632/Guez Topographic#-1:125"
1\name = "Guez Topographic"
2\url = "file:Guez_Aerial_32632_Guez_Aerial_32632/Guez Aerial#-1:125"
2\name = "Guez Aerial"
3\url = "file:Guez_HotSpots_Salchau_Aerial_0m20_2017_32632#-1:125"
3\name = "HotSpots Salchau Aerial"
4\url = "file:Guez_HotSpots_Schnoeggersburg_Aerial_0m20_2017_32632#-1:125"
4\name = "HotSpots Schnoeggersburg Aerial"
size=4


basemapLayernamePrefix = ""             ;# default: "ArcGISTiledLayer_URL_"

# For debugging only:
# an non-empty value will overwrite/skip the mapUrls:
#localMapFile = "Topographic.tpk"                       ;# empty (if so, try 'Topographic.tpk')
# : For debugging only



[sceneUrls]

#For on-site - windows
1\url = "file:Guez_Topo_WebMerc_Guez_Topo_WebMerc/Guez Topographic#-1:125"
1\name = "Guez Topographic"
2\url = "file:Guez_Aerial_WebMerc_Guez_Aerial_WebMerc/Guez Aerial#-1:125"
2\name = "Guez Aerial"
3\url = "file:Guez_HotSpots_Salchau_Aerial_0m20_2017_WebMerc#-1:125"
3\name = "HotSpots Salchau Aerial"
4\url = "file:Guez_HotSpots_Schnoeggersburg_Aerial_0m20_2017_WebMerc#-1:125"
4\name = "HotSpots Schnoeggersburg Aerial"
size=4


[sceneObjectUrls]
1\url = "file:GUEZ_BA1_EPSG3857_20181106.slpk"
size=1

[elevationUrls]
1\url = "file:Altmark_dt1.tif"                                                                                        ;# Altmark.dt1 -> Letzlingen, ??m
size=1


[operationalLayer]
# "<Layername>:<Static|Dynamic>:<Draped|Absolute|Relative>"
1\operationalLayer = "Buildings:Dynamic:Relative"              ;# Dynamic to avoid flicker at 3D if selection changes (MapObjectSelectionWidget)
2\operationalLayer = "TechnicalAreas:Dynamic:Draped"           ;# TechnicalArea@AES (MOUTArea), TrainingArea, ShootBackArea
3\operationalLayer = "MountingPoints:Dynamic:Absolute"
4\operationalLayer = "IEDs:Dynamic:Relative"
5\operationalLayer = "BuildingOwnership:Dynamic:Relative"      ;# keep ExtrusionMode (AbsoluteHeight) in mind
6\operationalLayer = "AES:Dynamic:Draped"
7\operationalLayer = "AESCentral:Dynamic:Draped"               ;# 3D-AreaEffectSimulation, draped, SubLayer 'GraphicsLayer_3D_Absolute' is absolute
8\operationalLayer = "Participants:Dynamic:Relative"
9\operationalLayer = "Participants_1:Dynamic:Relative"
10\operationalLayer = "Participants_2:Dynamic:Relative"
11\operationalLayer = "Participants_3:Dynamic:Relative"
12\operationalLayer = "Participants_4:Dynamic:Relative"
13\operationalLayer = "Participants_5:Dynamic:Relative"
size=13

participantLayername = "Participants:Dynamic:Relative"         ;# default: "Participants:Dynamic:Relative"

operationalLayerForCubes = "BuildingOwnership"                 ;# must match with an operationalLayer


[map]

# full mgrs coordinate
# East;North
center = "32UPD7400013000"               ;#QPointF(93070, 78331) -> BT56 - Bremen
zoomFactorBase = 1.0015                 ;# to configure mouse wheel for zooming, only values greater 1 and lower 1.1 will be accepted

initialScale = 90000                    ;# 90000 -> Bremen ; 7000000 -> NorthGermany

# scaleMin and scaleMax (of map!) may be overwritten, if a layer is loaded manually -> to rethink
scaleMin = -1                           ;# big value   (e.g. 10000000) limiting zoomOut  1:10000000 -> 0.0000001
scaleMax = -1                           ;# small value (e.g. 1000)     limiting zoomIn   1:1000     -> 0.001

scaleHasVisibility = 70000              ;# zoom out -> some objects disappear to not overload the map

gridType = "MGRS"                       ;# Grid: NoType, MGRS, UTM, USGN, LatLon

animationDuration = 0.5                 ;# default -> 0.5 (0< 0 -> off)
rocketDuration = 2.0                    ;# default -> 2.0


[widgets]
addMapWidgets = 1
addSideBar    = 1

[viewshed]
# // arcgisonline -> only demo (keep proxy in mind!)
#viewshedUrl = "http://sampleserver1.arcgisonline.com/ArcGIS/rest/services/Elevation/ESRI_Elevation_World/GPServer/Viewshed" ;# // only demo!!!
viewshedUrl = "" ;# // SightFan -> not necessary


[rubberband]
drawColor         = "#00406e"           ;# Color settings of rubberband
fillColor         = "#007eC0"
handleDrawColor   = "#00406e"           ;# Outline color of handles
handleFillColor   = "#00406e"           ;# fill color of handles
selectionColor    = "red"               ;# fill or draw color if handle is selected
frameColor        = "#00406e"           ;# outline color of frame handle (bounding box)
frameFillColor    = "#5043b0e0"         ;# fill color of frame handle (bounding box)
frameHandleMargin = 0                   ;# Margin of frame handle in pixel
previewOffset     = @Point(32 32)       ;# Offset of preview icon to mouse position
previewSize       = 32                  ;# Size of preview icon
pickingRatio      = 8                   ;# Size of rubberband point handles
lineHandleWidth   = 4                   ;# Size of rubberband line handles

# to be continued