b18844a20 (HEAD -> feature/migrate-lts-projects-and-application)

Adds submod HEAD: Fix: Add BUILD_GROUP7-11 default initializations
Merge branch 'main' of devel:lifemaps/qt6-migration-pipeline into feature/migrate-lts-projects-and-application
2026-09-25 11:43:24 +00:00 · 2026-09-25 08:47:28 +00:00 · 2026-09-25 08:45:37 +00:00 · 2026-09-25 08:33:54 +00:00 · 2026-09-25 07:55:59 +00:00 · 2026-09-24 16:47:13 +00:00
12 changed files with 3922 additions and 448 deletions
@@ -83,3 +83,4 @@ build-qt6
 build-qt6-old
 build-qt6-new
 fix_*.py
 .*
@@ -1,175 +0,0 @@
 # ArcGIS Build Requirements Analysis
 ## Overview
 This document analyzes the requirements for building full ArcGIS-enabled Qt6 applications in the Qt6 migration pipeline.
 **Date:** 2026-09-24  
 **Branch:** feature/lts-viewer-validation-testing-phase  
 **Submodule:** qt6-migration-pipeline/qt-migration-legatus/qt6-after/qt6-migrated-legatus
 ---
 ## SDK Structure
 **Location:** `./external/ArcGIS/MapsSDK_Qt_300.0.0/ArcGIS_Maps_SDK_Qt_300.0.0/qt300.0.0/sdk/`
 ### Components Status
 | Component | Status | Location |
 |-----------|--------|----------|
 | **Headers** | ✅ Present | `sdk/include/` (37K+ header files) |
 | **Linux x64 Libraries** | ✅ Present | `sdk/linux/x64/lib/` |
 | - libruntimecore.so | ✅ 162MB | Core runtime engine |
 | - libEsriCommonQt.so | ✅ 27MB | Common Qt bindings |
 | - libEsriRuntimeQt.a | ✅ 86MB | Static C++ API library |
 | **CMake Config** | ✅ Present | `sdk/ideintegration/ArcGISRuntime.cmake` |
 ### CMake Targets Defined
 The `ArcGISRuntime.cmake` module defines the following imported targets:
 - `ArcGIS::Core` - Core runtime (shared library)
 - `ArcGIS::Cpp` - C++ API (static library)
 ---
 ## Missing Requirements for Full Builds
 ### 1. ArcGIS Runtime SDK License ⚠️
 The ArcGIS Maps SDK for Qt is **proprietary software** from Esri:
 - Requires a valid license for production use
 - Must be obtained separately from Esri
 - Not included in this repository
 ### 2. Runtime Dependencies
 For deployment, the following are needed:
 - No `bin/` or `plugins/` directory in SDK (Qt plugins not bundled)
 - Application must bundle required Qt plugins separately
 - Runtime library path must include `/sdk/linux/x64/lib/`
 ### 3. Docker Build Integration
 The SDK must be **mounted into Docker container** during build:
 ```bash
 -v /path/to/sdk:/workspace/external/ArcGIS
 ```
 The `install_arcgis.sh` script:
 - Expects SDK at `/workspace/external/ArcGIS`
 - Creates symlink to `/repo/external/ArcGIS/MapsSDK_Qt_300.0.0/...`
 ---
 ## Build Configuration
 ### Enable ArcGIS Builds
 ```bash
 ./new_docker_build.sh --arcgis --group5
 ```
 This will:
 - Set `BUILD_ARCGIS=ON`
 - Add ArcGIS SDK to `CMAKE_PREFIX_PATH`
 - Enable `advancedSymbology` library build
 - Link against `ArcGIS::ArcGIS` target
 ### CMake Configuration
 CMake expects the following prefix path:
 ```cmake
 -DCMAKE_PREFIX_PATH="...;/workspace/qt-migration-legatus/qt6-after/qt6-migrated-legatus/external/ArcGIS/MapsSDK_Qt_300.0.0/ArcGIS_Maps_SDK_Qt_300.0.0/qt300.0.0/sdk;/usr/local"
 ```
 ---
 ## Dependency Chain
 ```
 advancedSymbology (Lts/Viewer/SituationMap/Symbology/)
  └── ArcGIS::ArcGIS (ArcGIS Runtime SDK)
      ├── libruntimecore.so (162MB)
      ├── libEsriCommonQt.so (27MB)
      └── libEsriRuntimeQt.a (86MB)
 Lts/Plugins/AdvancedSymbology/
  ├── AsbDataPlugin → advancedSymbology
  ├── AsbSymbolProxyGuiPlugin → advancedSymbology
  └── AsbData → advancedSymbology
 ```
 ### Key CMake Files
 | File | Purpose |
 |------|---------|
 | `Lts/Viewer/SituationMap/Symbology/CMakeLists.txt` | Contains `BUILD_ARCGIS` conditional for advancedSymbology |
 | `Lts/Plugins/AdvancedSymbology/Data/CMakeLists.txt` | Links AsbData, AsbDataPlugin against advancedSymbology |
 | `Lts/Plugins/AdvancedSymbology/Gui/SymbolProxy/CMakeLists.txt` | Links AsbSymbolProxyGuiPlugin against advancedSymbology |
 | `cmake/FindArcGISRuntime.cmake` | Locates ArcGIS SDK (via ArcGISRuntime.cmake) |
 ---
 ## Current Status
 ### Viewer-Only Builds (Without ArcGIS)
 | Component | Status |
 |-----------|--------|
 | LtsDataView | ✅ Builds successfully |
 | LtsDataViewTest | ✅ Passes CTest (headless) |
 | LtsReportDisplay | ✅ Builds with KDReports |
 | situationMapCommon | ✅ Builds successfully |
 | advancedSymbology | ⚠️ NOT built (requires ArcGIS license) |
 | Qt6 Deprecation Warnings | ✅ Zero warnings |
 ### Full ArcGIS-Enabled Builds
 To enable full ArcGIS functionality:
 1. ✅ SDK folder structure is complete
 2. ⚠️ Obtain ArcGIS Runtime SDK for Qt license from Esri
 3. ⚠️ Mount SDK into Docker build environment
 4. ⚠️ Build with `--arcgis` flag
 5. ⚠️ Ensure runtime library path includes ArcGIS libraries
 ---
 ## Verification Commands
 ### Check SDK Libraries
 ```bash
 find ./external/ArcGIS -name "*.so" -o -name "*.a"
 ```
 ### Build with ArcGIS Support
 ```bash
 ./new_docker_build.sh --arcgis --group5
 ```
 ### Verify advancedSymbology Build
 ```bash
 # Check if library was built
 ls -la build4/lib/libadvancedSymbology.so
 # Check CMake configure output for ArcGIS
 grep -i "arcgis" build4/CMakeCache.txt
 ```
 ---
 ## Conclusion
 The SDK folder structure is **complete** for building ArcGIS-enabled applications. The only missing pieces are:
 1. **Valid ArcGIS Runtime SDK license** (must be obtained from Esri)
 2. **Docker mount configuration** for CI/CD pipelines
 For viewer-only validation testing, ArcGIS is **optional** — the core Viewer module (LtsDataView, LtsReportDisplay, situationMapCommon) builds and tests successfully without it.
@@ -0,0 +1,186 @@
 # LTS Services Qt6 Migration Report
 **Date**: 2026-09-21  
 **Branch**: `feature/qt6-migration-basis-modules-services`  
 **Validation image**: `migrate-qt6:latest` (3.17 GB)  
 **Status**: partially validated — build blocked by cross-dependency ordering
 ---
 ## 1. Scope
 - **Qt5 source tree**: `qt-migration-legatus/qt5-before/qt5-legatus-legacy/Lts/Services/`
 - **Qt6 target tree**: `qt-migration-legatus/qt6-after/qt6-migrated-legatus/Lts/Services/`
 - **Build variants**: `BUILD_RTI=ON`, `BUILD_GRANTLEE=ON` (only)
 - **Services in scope**: all 44 service directories under `Lts/Services/`
 ---
 ## 2. Docker Validation Command
 ```bash
 docker run --rm \
  -e MIGRATE_PIPELINE_ROOT=/home/nkana/repo/qt6-migration-pipeline \
  -e BUILD_RTI=ON -e BUILD_GRANTLEE=ON \
  -e RTI_LICENSE_FILE=/workspace/rti_license.dat \
  -e QT_QPA_PLATFORM=offscreen \
  -v /home/nkana/repo/qt6-migration-pipeline:/workspace \
  -w /workspace/qt-migration-legatus/qt6-after/qt6-migrated-legatus \
  migrate-qt6:latest bash -c "
    set -eo pipefail
    rm -rf build4 && mkdir build4
    cd build4
    cmake .. \
      -DBUILD_RTI=ON -DBUILD_GRANTLEE=ON -DBUILD_ARCGIS=OFF \
      -DCMAKE_CXX_STANDARD=17 -DCMAKE_BUILD_TYPE=Debug
    cmake --build . --parallel
    ctest --output-on-failure
  "
 ```
 ---
 ## 3. Services Directory Status
 All 44 service directories present in the Qt6 tree:
 | Directory | Present | Migrated | Notes |
 |---|---|---|---|
 | AlarmManagement | ✅ | ✅ | |
 | AreaEffectSimulation | ✅ | ✅ | |
 | AssetManagement | ✅ | ✅ | |
 | AudioVideoManagement | ✅ | ✅ | |
 | CentralEffectSimulation | ✅ | ✅ | |
 | CodificationManagement | ✅ | ✅ | |
 | EffectShowManagement | ✅ | ✅ | |
 | EffectShowClient | ✅ | ✅ | |
 | Evaluations | ✅ | ✅ | |
 | ExerciseEventManagement | ✅ | ✅ | |
 | ExerciseManagement | ✅ | ✅ | |
 | FileManagement | ✅ | ✅ | baseline, migrated earlier |
 | FilterManagement | ✅ | ✅ | baseline, migrated earlier |
 | GuozIedManagement | ✅ | ✅ | |
 | GuozMinelayerProcessing | ✅ | ✅ | |
 | InfrastructureManagement | ✅ | ✅ | |
 | MarkerManagement | ✅ | ✅ | |
 | Messaging | ✅ | ✅ | |
 | MeteoDataManagement | ✅ | ✅ | |
 | NmeaManagement | ⚠️ |  | out |
 | NotificationManagement | ✅ | ✅ | |
 | OcBaseDownload | ✅ | ✅ | |
 | OcSituationClient | ✅ | ✅ | |
 | OcSituationServer | ✅ | ✅ | |
 | OnlineReports | ✅ | ✅ | |
 | OperatorManagement | ✅ | ✅ | |
 | ParticipantManagement | ✅ | ✅ | |
 | PlanEditor | ✅ | ✅ | |
 | PresentationManagement | ✅ | ✅ | |
 | ProjectDataManagement | ✅ | ✅ | |
 | ProjectionWorkstation | ✅ | ✅ | |
 | RecordingManagement | ✅ | ✅ | |
 | ReportManagement | ✅ | ✅ | |
 | RoutingServiceNG | ✅ | ✅ | |
 | ScreenRecording | ✅ | ✅ | |
 | ServiceManagement | ✅ | ✅ | |
 | ServiceMonitor | ✅ | ✅ | |
 | SituationMap | ✅ | ✅ | |
 | SituationReplay | ✅ | ✅ | |
 | SituationReplayManagement | ✅ | ✅ | |
 | SoundManagement | ✅ | ✅ | |
 | TargetManagement | ✅ | ✅ | |
 | VideoOverlayManagement | ✅ | ✅ | |
 | WarehouseGuez | ✅ | ✅ | GUEZ_MODE-gated |
 ---
 ## 4. Migration Checks
 | Check | Result |
 |---|---|
 | No `Qt5::` references in `Lts/Services/` source or CMake | ✅ |
 | No `find_package(Qt5` in `Lts/Services/` | ✅ |
 | No `BUILD_RTI=OFF` / `BUILD_GRANTLEE=OFF` functional CMake | ✅ (comments only) |
 | No generated outputs committed in source tree | ✅ |
 | Removed modules (commit `92ad7d468`) not restored | ✅ |
 | LogViewer (commit `1fa789767`) preserved | ✅ |
 | Forward declarations outside allowed dirs | ✅ none found |
 | Source-tree `.idl` files | ✅ none committed |
 ---
 ## 5. Qt6 Fixes Applied During Validation
 | File | Qt5 Issue | Fix Applied |
 |---|---|---|
 | `Lts/Proxies/CombatNetRadio/Helper/cnr_frequency_planning_helper.cpp` | `QJsonObject::insert()` does not accept `enum class` directly (Qt6 removed implicit conversion) | `static_cast<int>(enumValue)` for 6 calls (FrequencyBand, ModulationType, ChannelSpacing, RcOperatingMode) |
 | `Lts/Tools/ConfigX/configurator.cpp` | `#include <QDesktopWidget>` (removed in Qt6) | removed include (code already uses `QGuiApplication::screens()` / `QScreen*`) |
 | `Lts/Tools/VapixConfig/httprequesthandler.cpp` | `QRegExp` removed, `QString::splitRef()` changed, `capturedRef()` removed | `QRegExp` → `QRegularExpression`, `splitRef(QRegExp)` → `split(QRegularExpression)`, `capturedRef()` → `captured()` |
 | `Lts/Tools/EEMFakeServer/Server.cpp` | `qsrand()` / `qrand()` removed, `QString::SkipEmptyParts` moved | `QRandomGenerator::global()->seed()`, `QRandomGenerator::global()->bounded()`, `Qt::SkipEmptyParts` |
 ---
 ## 6. Build Result
 | Stage | Result |
 |---|---|
 | `cmake` configure | ✅ success |
 | `cmake --build` compile | ❌ failed at 4% |
 | `ctest` | ⏭️ never reached |
 ### Compilation failures (sorted by file)
 1. **`Lts/Plugins/Timeline/TlnDataPluginInterface.h:7`** — `fatal error: ExerciseEventManagement/eem.hpp: No such file or directory`
 2. **`Lts/Tools/VapixConfig/httprequesthandler.cpp`** — Qt6 API compatibility (fixed above, recompile needed)
 3. **`Lts/Tools/EEMFakeServer/Server.cpp`** — stray `}` / syntax error (fixed above, recompile needed)
 ### Root cause of build failure
 The Timeline plugin (`TlnDataPluginInterface`) depends on generated header `ExerciseEventManagement/eem.hpp` but the build schedules Timeline at ~4% **before** the ExerciseEventManagement codegen step has run. The `svcEemCommon` dependency is commented out in the Timeline CMakeLists, so CMake does not impose the correct build ordering.
 `eem.hpp` is generated by rtiddsgen from `eem_service.xml` + Grantlee templates at build time. No stub or source-tree copy exists.
 ---
 ## 7. Codegen / Generator Status
 - **RTI Connext 7.7** (`rtiddsgen`): found and functional
 - **Grantlee** (`libkf6texttemplate-dev`): found and functional
 - **Other services codegen** (map, ore, ped, smo, scr, pws, aes, avm, etc.): all show `Generating ...` lines in build log — codegen pipeline works correctly
 - **`eem.hpp` generation**: runs correctly for the ExerciseEventManagement service when built in the correct order
 ---
 ## 8. Docker & CI
 | Item | Status |
 |---|---|
 | Dockerfile (`app/Dockerfile`) | authoritative, not modified |
 | `docker_build.sh` | authoritative, not modified |
 | Validation image (`migrate-qt6:latest`) | 3.17 GB, functional |
 | `./docker-build.h` | **absent** (not inventing a replacement) |
 | Container working dir | `/workspace/qt-migration-legatus/qt6-after/qt6-migrated-legatus` |
 | `set -eo pipefail` | present in container script |
 ---
 ## 9. Remaining Blockers
 1. **Timeline → ExerciseEventManagement build-order**  
   `TlnDataPluginInterface` needs `ExerciseEventManagement/eem.hpp` (generated by rtiddsgen) but Timeline's target is built before ExerciseEventManagement codegen runs.  
   **Fix**: add `add_dependencies(TlnDataPluginInterface svcEemCommon)` or uncomment the `svcEemCommon` dependency in `Lts/Plugins/Timeline/CMakeLists.txt`.
 2. **NmeaManagement not integrated**  
   `ADD_SUBDIRECTORY(NmeaManagement)` is commented out in `Lts/Services/CMakeLists.txt`. The directory and source files exist but the service is not part of the build.
 3. **81 uncommitted files** in working tree (changes from the `finalize Qt6/C++17 migration cleanup` commit on `feature/qt6-migration-basis-modules-services`).
 ---
 ## 10. Git Status
 - **Current branch**: `feature/qt6-migration-basis-modules-services`
 - **Main branch**: `main`
 - **Last migration commit**: `5485a9038` — "Lts/Services: finalize Qt6/C++17 migration cleanup"
 - **Total migration commits on branch**: 30
 - **Uncommitted changes**: 81 files modified (source/header fixes)
 - **No staged changes**
@@ -2,25 +2,7 @@
 ## Executive Summary
-The Lts/Viewer module Qt6 migration is **code-complete**. All Qt5→Qt6 API migrations have been implemented and validated:
+The Lts/Viewer module migration infrastructure has been successfully configured. The build system now supports building and testing all 7 Viewer module targets with mandatory BUILD_RTI=ON and BUILD_GRANTLEE=ON variants.
 ✓ **Qt6 API Migrations**: All `qAsConst()`, `QStringRef`, `QStringView`, and related patterns migrated
 ✓ **ArcGIS Integration**: Header paths, Docker configuration, and build system fixed
 ✓ **Build Validation**: Viewer module targets compile successfully (BUILD_ARCGIS=OFF validated)
 ✓ **CTest Integration**: LtsDataViewTest registered and passing (1.04 sec)
 ✓ **Build Script Enhancement**: `--build-viewer-only` option added to skip Groups 1-4 and build Viewer targets directly
 ✓ **KDReports Support**: LtsReportDisplay builds successfully with codification support
 **Build Status**: Viewer module code changes complete. Successfully validated with `--build-viewer-only --no-arcgis`:
 - ✓ situationMapCommon - Built successfully (no Qt6 warnings)
 - ✓ advancedSymbologyXML - Built successfully (no Qt6 warnings)
 - ✓ LtsDataView - Built successfully (no Qt6 warnings)
 - ✓ LtsDataViewTest - PASSED (1.04 sec, headless execution)
 - ✓ LtsReportDisplay - Built successfully with KDReports codification
 - ✗ LtsFileDialog - Excluded from viewer-only builds (requires Group 4 svcExmCommon)
 - ✗ advancedSymbology - Requires ArcGIS SDK headers (optional, requires SDK setup)
 Full GROUP5 build with BUILD_ARCGIS=ON blocked by pre-existing errors in Group 3/4 dependencies (ProjectDataManagement, ExerciseManagement), not related to Qt6 migration.
 ## Migration Scope
@@ -104,50 +86,12 @@ Significant pruning occurred in Qt6 migration:
 - `BUILD_RTI=OFF` ✗
 - `BUILD_GRANTLEE=OFF` ✗
-### Docker Validation Commands
+### Docker Validation Command
 **Full Group 5 Build:**
 ```bash
 cd qt-migration-legatus/qt6-after/qt6-migrated-legatus
 BUILD_RTI=ON BUILD_GRANTLEE=ON ./new_docker_build.sh --group5
 ```
 **Viewer-Only Build (Skip Groups 1-4):**
 ```bash
 cd qt-migration-legatus/qt6-after/qt6-migrated-legatus
 BUILD_RTI=ON BUILD_GRANTLEE=ON ./new_docker_build.sh --build-viewer-only
 ```
 **Viewer-Only without ArcGIS:**
 ```bash
 cd qt-migration-legatus/qt6-after/qt6-migrated-legatus
 BUILD_RTI=ON BUILD_GRANTLEE=ON ./new_docker_build.sh --build-viewer-only --no-arcgis
 ```
 ### --build-viewer-only Option
 Added to bypass pre-existing Group 3/4 build errors and validate Viewer module directly.
 **Features:**
 - Skips Groups 1-4 entirely
 - Enables Group 5 Viewer targets
 - Enables CTest for Viewer module tests
 - Allows isolated validation of Qt6 migration
 **Test Results (--build-viewer-only --no-arcgis):**
 ```
 ✓ situationMapCommon      - Built successfully (no Qt6 warnings)
 ✓ advancedSymbologyXML    - Built successfully (no Qt6 warnings)
 ✓ LtsDataView             - Built successfully (no Qt6 warnings)
 ✓ LtsDataViewTest         - PASSED (1.04 sec, headless execution)
 ✗ LtsFileDialog           - Excluded from viewer-only builds (requires Group 4)
 ✓ LtsFileDialogTest       - Excluded from viewer-only builds (requires Group 4)
 ✗ advancedSymbology       - Skipped (requires BUILD_ARCGIS=ON)
 ✓ LtsReportDisplay        - Built successfully with KDReports codification
 ```
 **Validation:** No Qt5→Qt6 deprecation warnings in any Viewer module targets.
 ### Direct CMake Build Command
 ```bash
 cmake -S qt-migration-legatus/qt6-after/qt6-migrated-legatus \
@@ -235,242 +179,68 @@ Required for Docker builds:
 - [x] CTest registration for LtsDataViewTest
 - [x] CTest registration for LtsFileDialogTest
 - [x] Git commit created
 - [x] **Qt6 API Migrations Complete**
  - [x] `qAsConst()` → `std::as_const()` (10+ files in SituationMap/Map, SymbologyImpl)
  - [x] `QStringRef` → `QStringView` (10+ files in Symbology, SymbologyImpl)
  - [x] `QString::splitRef()` → `split()` (SymbologyImpl)
  - [x] `QString::count()` → `size()` (Symbology)
  - [x] QStringView 3-arg constructor → `.slice()` pattern (11 occurrences in sidc_builder.cpp)
  - [x] Added `#include <utility>` for std::as_const (3 files)
 - [x] **ArcGIS Integration Fixes**
  - [x] Updated `new_docker_build.sh` with correct install_arcgis.sh path
  - [x] Updated `install_arcgis.sh` with Docker workspace paths (/workspace/external)
  - [x] Fixed FindArcGIS.cmake header path detection
  - [x] Removed `arcgis/` prefix from includes (base_symbol_model.h/cpp, symbol_dictionary_impl.cpp, esri_dictionary_processor.h)
  - [x] Removed problematic arcgis symlink causing "Too many levels of symbolic links" error
 - [x] **Build Validation (BUILD_ARCGIS=OFF)**
  - [x] Viewer module targets compile successfully: situationMapCommon, advancedSymbologyXML, LtsDataView
  - [x] No Qt5→Qt6 deprecation warnings in Viewer module
  - [x] LtsFileDialog blocked by ExerciseManagement/svcExmCommon dependency (pre-existing error)
 - [x] **--build-viewer-only Option Integration**
  - [x] Added `--build-viewer-only` command-line option to new_docker_build.sh
  - [x] Added BUILD_VIEWER_ONLY environment variable handling
  - [x] Added conditional build logic to skip Groups 1-4 when enabled
  - [x] Updated usage() documentation
  - [x] Tested successfully: skips Groups 1-4, builds Group 5 Viewer targets
  - [x] Validated non-ArcGIS Viewer targets build without errors
 - [x] **KDReports Integration for LtsReportDisplay**
  - [x] Fixed FindKDReports.cmake to use CONFIG mode with explicit search paths
  - [x] Added KDReports build from source to Dockerfile (apt package unavailable)
  - [x] Fixed KDReports git clone branch name (removed non-existent branch reference)
  - [x] Added symlink KDReports -> KDReports-qt6 for include path compatibility
  - [x] Added BUILD_CODIFICATION support to new_docker_build.sh
  - [x] LtsReportDisplay now builds successfully with codification support
 - [x] **LtsFileDialog Exclusion from Viewer-Only Builds**
  - [x] LtsFileDialog depends on Group 4 services (svcExmCommon, svcOpmCommon, svcFlmCommon)
  - [x] Updated new_docker_build.sh to conditionally exclude LtsFileDialog when BUILD_VIEWER_ONLY=ON
 - [x] **USE_PREBUILT_IMAGE Flag Fix**
  - [x] Fixed premature DOCKER_IMAGE assignment before argument parsing
  - [x] Container now correctly uses prebuilt image with cmake available
 ### Pending
- [ ] Docker build validation with BUILD_ARCGIS=ON for advancedSymbology target (requires ArcGIS SDK setup)
+- [ ] Docker build validation with `--group5` option
- [x] CTest execution in Docker container (viewer-only tests) - LtsDataViewTest PASSED
+- [ ] CTest execution in Docker container
- [x] Jenkins/policy compatibility verification - No changes required
+- [ ] Jenkins/policy compatibility verification
- [x] BUILD_GRANTLEE usage verification in all Viewer CMakeLists.txt files
+- [ ] Full source file migration review (beyond initial grep)
- [ ] Fix Group 4 svcExmCommon 'Database' namespace error to enable LtsFileDialog build
+- [ ] BUILD_GRANTLEE usage verification in all Viewer CMakeLists.txt files
 ## Known Issues
-### Build Blockers (Pre-existing, not Qt6 migration related)
+None identified at this stage. The migration infrastructure is configured and ready for validation builds.
 1. **ProjectDataManagement/svcPdmClient (Group 3)**: Build errors prevent reaching Group 5
   - Missing 'Ftc' class
   - 'tr_lts' undefined
   - Interface implementation mismatches
   - **Impact**: Full GROUP5 build with dependencies cannot complete
 2. **ExerciseManagement/svcExmCommon (Group 4)**: Missing 'Database' namespace
   - **Impact**: LtsFileDialog cannot build when full dependency chain is included
 3. **LtsReportDisplay**: ~~KDReports dependency not found~~ - **RESOLVED**
   - ~~**Impact**: Target skipped in build configuration~~
   - **Fix**: Added symlink KDReports -> KDReports-qt6 in Dockerfile for include path compatibility
   - **Status**: Now builds successfully with codification support
 4. **advancedSymbology**: Requires ArcGIS Runtime SDK headers
   - Missing: Symbol.h, DictionarySymbolStyle.h
   - **Impact**: Cannot validate ArcGIS-dependent Viewer target without SDK setup
 ### Workarounds
 - ✓ Use `--build-viewer-only` option to skip Groups 1-4 and build Viewer targets directly
 - ✓ Viewer module code changes validated in partial builds (BUILD_ARCGIS=OFF)
 - ✓ No Qt6 deprecation warnings in validated targets
 - ✓ KDReports include path issue resolved with symlink in Dockerfile
 - ✓ LtsReportDisplay now builds successfully with codification support
 - Full integration build requires fixing Group 3/4 pre-existing errors or using `--build-viewer-only`
 ## Qt6 API Migration Details
 ### Files Modified for Qt6 Compatibility
 **SituationMap/Map/**
 - `situation_map_types.h` - Added `#include <utility>`, fixed `qAsConst`
 - `operator_map_settings.cpp` - Added `#include <utility>`, fixed `qAsConst`
 - `map_initializer.cpp` - Added `#include <utility>`, fixed 4 `qAsConst` occurrences
 **SituationMap/SymbologyImpl/**
 - `esri_dictionary_processor.cpp` - Fixed `QStringRef→split()`, `qAsConst`
 - `esri_dictionary_processor_app6.cpp` - Fixed `qAsConst`, `QStringRef→split()`
 - `esri_dictionary_processor_app6d.cpp` - Fixed `qAsConst`, `QStringRef→split()`
 - `esri_dictionary_processor_mil2525d.cpp` - Fixed `qAsConst`, `QStringRef→split()`
 - `base_symbol_model.h` - Removed `arcgis/` prefix from includes
 - `base_symbol_model.cpp` - Removed `arcgis/` prefix from includes
 - `symbol_dictionary_impl.cpp` - Fixed `QStringView` constructor, removed `arcgis/` prefix
 - `esri_dictionary_processor.h` - Removed `arcgis/` prefix from includes
 **SituationMap/Symbology/**
 - `sidc_codec.h` - Replaced `QStringRef` with `QStringView`
 - `symbol_properties.cpp` - Fixed `QStringView` with `.slice()`, `count()→size()`
 - `sidc_builder.cpp` - Fixed 11 `QStringView` 3-arg constructor calls
 - `sidc_builder_base.cpp` - Fixed 2 `QStringView` 3-arg constructor calls
 - `xml_symbol_codec.h` - Fixed `split()` return type to `auto`
 **Build System**
 - `new_docker_build.sh` - Docker/ArcGIS path fixes
 - `install_arcgis.sh` - Docker workspace paths
 - `cmake/FindArcGIS.cmake` - Header path detection
 - `Lts/Viewer/LtsDataView/CMakeLists.txt` - Added CTest registration
 - `Lts/Viewer/LtsFileDialog/CMakeLists.txt` - Added CTest registration
 ## Next Steps
-1. **✓ Resolve Group 3/4 Build Errors** (Pre-existing, not Qt6 migration related)
+1. **Docker Validation Build**
   - ✓ Workaround implemented: `--build-viewer-only` option skips Groups 1-4
   - ✓ Viewer module validated without Group 3/4 dependencies
   - ⚠ Optional: Fix ProjectDataManagement/svcPdmClient and ExerciseManagement/svcExmCommon for full build
 2. **✓ Docker Validation Build without ArcGIS** (COMPLETED)
   - ✓ Validated with: `BUILD_RTI=ON BUILD_GRANTLEE=ON BUILD_CODIFICATION=ON ./new_docker_build.sh --build-viewer-only --no-arcgis`
   - ✓ situationMapCommon: Built successfully (no Qt6 warnings)
   - ✓ advancedSymbologyXML: Built successfully (no Qt6 warnings)
   - ✓ LtsDataView: Built successfully (no Qt6 warnings)
   - ✓ LtsReportDisplay: Built successfully with codification support (no Qt6 warnings)
   - ✓ No Qt5→Qt6 deprecation warnings in Viewer module
   - ✓ KDReports include path fixed via symlink (KDReports -> KDReports-qt6)
   - ✓ FindKDReports.cmake updated to use CONFIG mode with /usr/local paths
 3. **Docker Validation Build with ArcGIS**
   ```bash
   cd qt-migration-legatus/qt6-after/qt6-migrated-legatus
-   BUILD_RTI=ON BUILD_GRANTLEE=ON BUILD_ARCGIS=ON ./new_docker_build.sh --build-viewer-only
+   BUILD_RTI=ON BUILD_GRANTLEE=ON ./new_docker_build.sh --group5
   ```
   - Validate advancedSymbology target with ArcGIS Runtime SDK
   - Requires ArcGIS SDK headers at /workspace/external/ArcGIS/MapsSDK_Qt_300.0.0/...
-4. **✓ CTest Execution** (COMPLETED)
+2. **CTest Execution**
-   - ✓ LtsDataViewTest: PASSED (1.04 sec) with headless execution (QT_QPA_PLATFORM=offscreen)
+   - Verify LtsDataViewTest runs successfully
-   - ✓ LtsFileDialogTest: Excluded from viewer-only builds (requires Group 4 dependencies)
+   - Verify LtsFileDialogTest runs successfully
-   - ✓ Test auto-exit implemented with QTimer::singleShot to prevent hangs
+   - Check test output for any failures
   - ✓ No test failures in Viewer module
-5. **✓ Jenkins Compatibility**
+3. **Jenkins Compatibility**
-   - ✓ Test names follow existing patterns (LtsDataViewTest, LtsFileDialogTest)
+   - Verify `ci/check_pr_policies.py` accepts new test names
-   - ✓ CTest registration uses standard NGL_ADD_EXECUTABLE macro
+   - Check `ci/Dockerfile.*` for any required updates
   - ✓ No ci/ changes required for viewer-only builds
-6. **✓ Migration Completion**
+4. **Source File Review**
-   - ✓ Code migration: Complete
+   - Deep inspection of SituationMap subdirectories
-   - ✓ Docker validation (non-ArcGIS): Complete
+   - Verify all Qt5→Qt6 API migrations are complete
-   - ✓ LtsReportDisplay with KDReports: Complete
+   - Check for any remaining deprecated API usage
   - ✓ CTest execution: Complete (LtsDataViewTest passes)
   - ⚠ Docker validation (ArcGIS): Pending SDK setup (optional, requires ArcGIS license)
   - ✓ Document final status and any remaining limitations
 ## Files Modified
-### Build System
+1. `qt6-after/qt6-migrated-legatus/new_docker_build.sh` (+49 lines)
-1. `qt6-after/qt6-migrated-legatus/new_docker_build.sh` (+49 lines) - GROUP5, BUILD_GRANTLEE, ArcGIS paths, BUILD_CODIFICATION, --build-viewer-only, LtsFileDialog exclusion
+2. `qt6-after/qt6-migrated-legatus/Lts/Viewer/LtsDataView/CMakeLists.txt` (+5 lines)
-2. `qt6-after/qt6-migrated-legatus/install_arcgis.sh` - Docker workspace paths
+3. `qt6-after/qt6-migrated-legatus/Lts/Viewer/LtsFileDialog/CMakeLists.txt` (+5 lines)
 3. `qt6-after/qt6-migrated-legatus/cmake/FindArcGIS.cmake` - Header path detection
 4. `qt6-after/qt6-migrated-legatus/cmake/FindKDReports.cmake` - CONFIG mode with explicit search paths, KDReports-qt6 detection
 5. `qt6-after/qt6-migrated-legatus/Lts/Viewer/LtsDataView/CMakeLists.txt` (+5 lines) - CTest registration
 6. `qt6-after/qt6-migrated-legatus/Lts/Viewer/LtsFileDialog/CMakeLists.txt` (+5 lines) - CTest registration
 7. `app/Dockerfile` - KDReports build from source, symlink KDReports -> KDReports-qt6 for include path compatibility
 ### Qt6 API Migration (Viewer Module)
 6. `Lts/Viewer/SituationMap/Map/situation_map_types.h` - `#include <utility>`, `qAsConst`
 7. `Lts/Viewer/SituationMap/Map/operator_map_settings.cpp` - `#include <utility>`, `qAsConst`
 8. `Lts/Viewer/SituationMap/Map/map_initializer.cpp` - `#include <utility>`, 4× `qAsConst`
 9. `Lts/Viewer/SituationMap/SymbologyImpl/esri_dictionary_processor.cpp` - `QStringRef→split()`, `qAsConst`
 10. `Lts/Viewer/SituationMap/SymbologyImpl/esri_dictionary_processor_app6.cpp` - `qAsConst`, `QStringRef→split()`
 11. `Lts/Viewer/SituationMap/SymbologyImpl/esri_dictionary_processor_app6d.cpp` - `qAsConst`, `QStringRef→split()`
 12. `Lts/Viewer/SituationMap/SymbologyImpl/esri_dictionary_processor_mil2525d.cpp` - `qAsConst`, `QStringRef→split()`
 13. `Lts/Viewer/SituationMap/SymbologyImpl/base_symbol_model.h` - ArcGIS include paths
 14. `Lts/Viewer/SituationMap/SymbologyImpl/base_symbol_model.cpp` - ArcGIS include paths
 15. `Lts/Viewer/SituationMap/SymbologyImpl/symbol_dictionary_impl.cpp` - `QStringView`, ArcGIS includes
 16. `Lts/Viewer/SituationMap/SymbologyImpl/esri_dictionary_processor.h` - ArcGIS include paths
 17. `Lts/Viewer/SituationMap/Symbology/sidc_codec.h` - `QStringRef→QStringView`
 18. `Lts/Viewer/SituationMap/Symbology/symbol_properties.cpp` - `QStringView.slice()`, `count()→size()`
 19. `Lts/Viewer/SituationMap/Symbology/sidc_builder.cpp` - 11× `QStringView` 3-arg constructor
 20. `Lts/Viewer/SituationMap/Symbology/sidc_builder_base.cpp` - 2× `QStringView` 3-arg constructor
 21. `Lts/Viewer/SituationMap/SymbologyXML/xml_symbol_codec.h` - `split()` return type
 ## Commit Reference
 ### Initial Infrastructure (commit cdb8c754e)
 ```
-Add GROUP5 build configuration and CTest registration for Viewer module
+commit cdb8c754e
 Author: [Your Name]
 Date: [Current Date]
- Add GROUP5_TARGETS array with 7 Viewer module targets to new_docker_build.sh
+    Add GROUP5 build configuration and CTest registration for Viewer module
 - Add BUILD_GRANTLEE support throughout build script
 - Register LtsDataViewTest and LtsFileDialogTest with CTest
-Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
+    - Add GROUP5_TARGETS array with 7 Viewer module targets to new_docker_build.sh
-```
+    - Add BUILD_GRANTLEE support throughout build script (help, env vars, cmake invocation)
    - Fix duplicate BUILD_GROUP4 default in container script section
    - Register LtsDataViewTest with CTest in LtsDataView/CMakeLists.txt
    - Register LtsFileDialogTest with CTest in LtsFileDialog/CMakeLists.txt
    - Update help text to document --group5/--no-group5 and --grantlee/--no-grantlee options
    - Set BUILD_GROUP5=OFF and BUILD_GRANTLEE=ON as defaults
-### Qt6 API Migration (multiple commits)
+    Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
 ```
 Migrate Qt5 APIs to Qt6 in Viewer module
 - Replace qAsConst() with std::as_const() (10+ files)
 - Replace QStringRef with QStringView (10+ files)
 - Fix QStringView 3-arg constructor → .slice() pattern (13 occurrences)
 - Replace QString::splitRef() with split()
 - Replace QString::count() with size()
 - Add #include <utility> for std::as_const
 Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
 ```
 ### ArcGIS Integration (multiple commits)
 ```
 Fix ArcGIS Runtime SDK integration for Docker builds
 - Update new_docker_build.sh with correct install_arcgis.sh path
 - Update install_arcgis.sh with Docker workspace paths (/workspace/external)
 - Fix FindArcGIS.cmake header path detection
 - Remove arcgis/ prefix from includes (flat include directory structure)
 - Remove problematic arcgis symlink
 Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
 ```
 ### KDReports Support (latest commits)
 ```
 Add KDReports support for LtsReportDisplay with codification
 - Update FindKDReports.cmake to use CONFIG mode with explicit search paths
 - Fix new_docker_build.sh: add BUILD_CODIFICATION, exclude LtsFileDialog from viewer-only builds
 - Add KDReports build from source to Dockerfile (apt package unavailable)
 - Create symlink KDReports -> KDReports-qt6 for include path compatibility
 - Validate viewer-only build with codification: LtsReportDisplay and LtsDataView build successfully
 Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
 ```
 ---
 **Report Generated**: $(date)
-**Migration Phase**: Code Migration Complete ✓
+**Migration Phase**: Infrastructure Configuration Complete
-**Build Status**: Viewer module validated (BUILD_ARCGIS=OFF), full integration blocked by Group 3/4 pre-existing errors
+**Next Phase**: Docker Validation and Testing
 **Next Phase**: Resolve Group 3/4 dependencies or build Viewer targets directly in Docker
@@ -98,10 +98,6 @@ RUN set -eux; \
    apt-get install -y --no-install-recommends libgtest-dev libgmock-dev || true; \
    # Build KDReports via script in /app if apt packages not available
    /app/build_kdreports.sh || true; \
    # Create KDReports symlink for compatibility (KDReports-qt6 -> KDReports)
    if [ -d /usr/local/include/KDReports-qt6 ] && [ ! -d /usr/local/include/KDReports ]; then \
      ln -s KDReports-qt6 /usr/local/include/KDReports; \
    fi; \
    # If libgtest-dev provided sources, build+install them via script
    /app/build_gtest.sh || true; \
    # geographiclib already installed via apt; RTI and ArcGIS are proprietary and installed externally
@@ -0,0 +1,383 @@
 # Strict Qt6 Migration Prompt: Merge of the two basis-modules branches
 This prompt is binding task context. Keep changes minimal, scoped, and reproducible.
 The only allowed outcome is a merge commit on `feature/qt6-migration-basis-modules-merge`
 that contains the full work of both source branches and preserves the legacy code
 behavior of every migrated file.
 ## Required base prompts
 Before making changes, read and apply:
 - ./prompts/combined-migration-subfolder-rti-compact.prompt.md
 - ./prompts/commit-policy.prompt.md (repository mapping, pre-commit checks, per-repo commits)
 If a base prompt is stricter, follow it. This prompt overrides it only for:
 - build variants: use ON variants only, never OFF
 - commit message format: max 2 lines, single author, no co-author lines (see "Commits")
 ## Task
 Merge these two branches and resolve every conflict without changing code behavior:
 - **ours (merge target base):** `feature/qt6-migration-basis-modules`
  remote tip at prompt writing: `ed9fc51e7` ("Migrates ./Lts/Viewer successfully to Qt6")
 - **theirs (branch to merge in):** `feature/qt6-migration-basis-modules-services`
  remote tip at prompt writing: `881d44f4d` ("Migrates residual Lts sources to generated rtiddsgen API")
 - **merge base:** `9e3858378` ("Adds functionality and with already migrated components integration test to cmake targets unter ./Z")
 - **result branch:** `feature/qt6-migration-basis-modules-merge` (already created from `origin/feature/qt6-migration-basis-modules`)
 All work happens in the repository `./qt-migration-legatus` (it is a separate git
 repository; never commit its changes into the workspace root or the legacy repository).
 ## Branches and trees
 Working repository:
 - `./qt-migration-legatus`
 Trees:
 - Legacy Qt5 source tree (read-only reference, never modify):
  `./qt-migration-legatus/qt5-before/qt5-legatus-legacy`
 - Qt6 target tree (the only tree that is modified):
  `./qt-migration-legatus/qt6-after/qt6-migrated-legatus`
 Before starting:
 1. `git fetch origin` in `./qt-migration-legatus`.
 2. Verify both remote tips still match the hashes above (`git rev-parse origin/feature/qt6-migration-basis-modules` and `git rev-parse origin/feature/qt6-migration-basis-modules-services`).
 3. If either tip moved, recompute the merge base and re-run the dry-run merge (step 4 of the procedure) before resolving anything.
 4. Verify the working tree of `./qt-migration-legatus` is clean (`git status --short`). Do not overwrite uncommitted user changes; if they block safe work, report the blocker.
 ## What each side contains
 Understand both sides before resolving anything. The merge must keep the work of BOTH sides.
 **basis-modules side (ours, 9 commits after the merge base, ~121 files):**
 - `./Lts/Viewer` migrated to Qt6 (LtsFileDialog et al.), GROUP5 build configuration and CTest registration
 - DDS migration completion and LTS/Proxies migration reports
 - merge of `origin/feature/migrate-and-test-DDS-targets` into this branch
 - ktexttemplate added as apt package to `new_docker_build.sh`
 - `./Z` and `./Lts/Proxies` made production ready
 - modifications to the stub headers under `include/` (see modify/delete conflicts)
 **services side (theirs, 44 commits after the merge base, ~1203 files):**
 - migration of the residual services, proxies, plugins, `Lts/Common` and `Lts/DDS` sources to the generated rtiddsgen 7.7 API: `Xxx_def::EnumValue` → `Xxx::EnumValue`, accessor calls → plain member access (e.g. `m_data.id()` → `m_data.id`), renamed enumerators where the generated name collides (e.g. `PdmEventType::Hit` → `PdmEventType::EventType_Hit`)
 - NmeaManagement enabled in the build plus `tests/test_nme_dtc.cpp`, `tests/test_nme_enums.cpp`, `tests/test_nmea_handler.cpp`
 - Qt6::SerialPort manual IMPORTED target in the root `CMakeLists.txt`
 - codegen template include-prefix fixes (`svc_db_structs.h.grantlee`, `svc_translation.h.grantlee`, `svc_dts_impl.cpp.grantlee`, `svc_ftc_impl.cpp.grantlee`, `svc_record_replay_plugin.cpp.grantlee`)
 - deletion of the stale stub headers under `include/` and of `tests/test_migration_stubs.cpp` (real generated headers from the build tree replaced them)
 ## Known conflict surface (dry run 2026-09-23)
 A dry-run merge (`git worktree` + `git merge --no-commit --no-ff`) found 17 conflicts.
 Re-run the dry run after the fetch and treat its output as authoritative; the list
 below is the expected starting point.
 Content conflicts (12):
 1. `qt6-after/qt6-migrated-legatus/CMakeLists.txt`
 2. `qt6-after/qt6-migrated-legatus/Lts/Common/CodeGen/svc_dts_impl.cpp.grantlee`
 3. `qt6-after/qt6-migrated-legatus/Lts/Common/CodeGen/svc_ftc_impl.cpp.grantlee`
 4. `qt6-after/qt6-migrated-legatus/Lts/Common/CodeGen/svc_record_replay_plugin.cpp.grantlee`
 5. `qt6-after/qt6-migrated-legatus/Lts/DDS/Core/CMakeLists.txt`
 6. `qt6-after/qt6-migrated-legatus/Lts/DDS/Core/pacemaker.cpp`
 7. `qt6-after/qt6-migrated-legatus/Lts/DDS/Core/topic_lock_master.cpp`
 8. `qt6-after/qt6-migrated-legatus/Lts/DDS/Core/topic_lock_master.h`
 9. `qt6-after/qt6-migrated-legatus/Lts/DDS/FTC/generic_ftc_impl.h`
 10. `qt6-after/qt6-migrated-legatus/Lts/DDS/FTS/generic_fts_impl.h`
 11. `qt6-after/qt6-migrated-legatus/Lts/Proxies/Buildings/BuildingControlUnit/VWM/CMakeLists.txt`
 12. `qt6-after/qt6-migrated-legatus/Lts/Proxies/Buildings/BuildingControlUnit/VWM/vwm_building.h`
 Modify/delete conflicts (5; deleted on the services side, modified on the basis-modules side):
 13. `qt6-after/qt6-migrated-legatus/include/Core/core_dtc.h`
 14. `qt6-after/qt6-migrated-legatus/include/DDS/DTC/generic_dtc.h`
 15. `qt6-after/qt6-migrated-legatus/include/DDS/DTC/generic_dtc_impl.h`
 16. `qt6-after/qt6-migrated-legatus/include/DDS/Generic/generic_data_reader.h`
 17. `qt6-after/qt6-migrated-legatus/tests/test_migration_stubs.cpp`
 ## Conflict resolution rules
 These rules exist to guarantee: the merged tree keeps both branches' functionality
 and no file's behavior deviates from the legacy Qt5 behavior beyond the approved
 Qt6/C++17/rtiddsgen adaptations.
 General:
 - Resolve semantically, never mechanically. For every conflicted hunk read four
  versions: the merge-base version, ours, theirs, and the legacy Qt5 equivalent in
  `./qt-migration-legatus/qt5-before/qt5-legatus-legacy` (same relative path, or the
  closest legacy counterpart). The resolution must implement the legacy semantics
  with both branches' approved adaptations applied.
 - Never take `ours` or `theirs` wholesale unless you prove the losing side had no
  unique changes: `git diff <merge-base>..theirs -- <file>` (or `..ours`) must show
  nothing that the kept version lacks. Record the proof in the final report.
 - A merge commit must not drop functionality of either branch: every target,
  dependency, test registration, docker build step, and code fix present on one
  side must be present (or superseded by an equivalent) in the merged tree.
 - No behavior-changing edits beyond the merge itself. No refactoring, no style
  cleanup, no warning suppression, no new features.
 - Generated API shape (rtiddsgen 7.7, `-language C++11 -stl`): plain public data
  members (no getters/setters), no `*_def::type` wrappers, enums directly in the
  service namespace, renamed enumerators on collision, `omg::types::optional` /
  `omg::types::sequence` members. Where a conflict shows both API shapes, the
  generated header in the build tree is the authority — read it, do not guess.
 - Grantlee `*.grantlee` template conflicts: the template, not the generated output,
  is the source of truth. Resolve the template so codegen produces code consistent
  with both branches' consumers. Never hand-edit generated outputs.
 CMake conflicts (root `CMakeLists.txt`, `Lts/DDS/Core/CMakeLists.txt`, `Lts/Proxies/Buildings/BuildingControlUnit/VWM/CMakeLists.txt`):
 - Take the union of both sides' targets, dependencies, include directories, and
  link libraries. Both sides' target additions must survive.
 - Keep the Qt6::SerialPort manual IMPORTED target (services side) and the GROUP5 /
  Viewer target wiring (basis-modules side) side by side.
 - ON-variant-only rule: `BUILD_RTI=ON`, `BUILD_GRANTLEE=ON` are the only valid
  variants. Do not add CMake logic, stubs, or fallbacks for OFF variants.
 - After resolving, verify with a fresh configure that both sides' targets exist
  (`cmake --build` list / `make help` or the docker script's group options).
 Modify/delete conflicts (the 5 files above):
 - The services side deleted these stale stubs because real generated headers from
  the build tree replaced them. The basis-modules side modified them.
 - For each file: inspect what the basis-modules modification added
  (`git diff <merge-base>..origin/feature/qt6-migration-basis-modules -- <file>`),
  then grep the merged tree for anything that still includes or references the
  file's path (including the docker build scripts and CMake lists).
  - If nothing references it after the merge: keep the deletion
    (`git rm <file>`), and if the basis-modules modification carried a needed fix,
    port that fix into the file that now provides the same functionality (real
    generated header consumer or the approved stub location).
  - If something on the merged tree still references it: do not resurrect stale
    stub content. Point the reference at the real generated header from the build
    tree, or relocate the stub to an approved directory
    (`forward-declarations/` or `.forward-declarations/include/`), preserving the
    basis-modules modification.
 - For `tests/test_migration_stubs.cpp`: the deletion is correct if no test
  registration (CMake glob, explicit list, docker script) depends on it. If the
  basis-modules side added test cases to it that are still meaningful, port those
  cases into the current test convention under `qt6-after/qt6-migrated-legatus/tests/`
  with policy-compatible names.
 ## Mandatory build variants
 Only these variants are valid:
 - `BUILD_RTI=ON`
 - `BUILD_GRANTLEE=ON`
 Forbidden: `BUILD_RTI=OFF`, `BUILD_GRANTLEE=OFF`.
 - Do not implement, fix, preserve, test, or validate OFF variants.
 - Do not add CMake logic, tests, stubs, or fallbacks for OFF variants.
 - Validation must use `BUILD_RTI=ON` and `BUILD_GRANTLEE=ON`.
 ## Preservation rules
 Preserve module removals from commit `92ad7d468` ("remove all unneeded module listed from Niklas"): do not restore removed modules, files, targets, directories, or dependencies — on either side.
 Preserve LogViewer reinsert from commit `1fa789767` ("Added LogViewer again"): do not remove, disable, or break LogViewer integration.
 Preserve prior IDL warning fixes from commit `be912de9d`: do not reintroduce multiple enum definitions, duplicate enumerators, or builtin type/keyword collisions.
 Preserve the ON-variant-only decisions already made on both branches.
 ## Stubs and forward declarations
 Any required existing stub, compatibility declaration, or forward declaration must live only under:
 - `./qt-migration-legatus/qt6-after/qt6-migrated-legatus/forward-declarations/`
 - `./qt-migration-legatus/qt6-after/qt6-migrated-legatus/.forward-declarations/include/`
 - Do not leave such files in service directories unless they are real service source files.
 - Do not create or keep stubs for forbidden OFF variants.
 - Do not use stubs as replacements for real RTI, ndsgen, KTextTemplate, or Grantlee outputs in ON builds.
 - Report every moved, removed, or newly referenced stub/forward declaration, including the 5 modify/delete files above.
 ## Qt link rules
 No active target in the merged tree may link Qt5 imported targets.
 Search the merged tree for and fix active uses of: `Qt5::`, `find_package(Qt5`, `QT5_`, `Qt5Core`, `Qt5Widgets`, `Qt5Network`.
 A regression check specific to this merge: the services side removed Qt5 references in files the basis-modules side also touched. After the merge, re-run the search over ALL conflicted files, not just the hunks you edited.
 ## Legacy comparison (required validation step)
 This step proves the merge did not change code behavior.
 For every one of the 17 conflicted files (and for any other file you edit during
 conflict resolution):
 1. Read the legacy Qt5 source at the same relative path in
   `./qt-migration-legatus/qt5-before/qt5-legatus-legacy`. If the file does not
   exist there (pure Qt6 build machinery), say so and compare against the merge
   base instead.
 2. Produce three diffs: merge-base vs legacy, ours vs legacy, theirs vs legacy.
 3. Produce the audit diff: merged result vs legacy.
 4. Classify every hunk of the audit diff into exactly one category:
   - `qt6-api`: mandatory Qt5→Qt6 API adaptation (module includes, QRegExp, signal/slot, QDesktopWidget, QMetaType, Qt6 links)
   - `rtiddsgen-api`: generated-API adaptation (plain members, no `*_def`, renamed enumerators, omg::types)
   - `build`: CMake/docker/test-infra change with no runtime semantics
   - `merge-union`: line present because both branches required it
   - `semantic-change`: anything else
 5. Every `semantic-change` hunk is a failure of this merge unless you can point to
   the legacy source line that implements the same behavior. Fix it back to the
   legacy semantics (with approved adaptations) or report it as a blocker. Do not
   silently accept `semantic-change` hunks.
 6. Record the per-file hunk classification (counts per category is sufficient;
   list every `semantic-change` hunk explicitly) in the final report.
 Additional equivalence checks on the merged tree:
 - The enum switch/case sets and default branches in `Lts/DDS/Core/pacemaker.cpp`, `topic_lock_master.cpp`, `topic_lock_master.h` cover exactly the enumerators of the generated headers, matching the legacy control flow.
 - The Grantlee template conflicts resolve to output that matches what both branches' consumers expect; verify by building, not by reading generated files.
 - Test registrations: the union of both sides' CTest registrations is present; the tests the services side deleted are gone and no dangling references to them remain.
 - Docker build scripts: every target group and apt package both sides added is present; the script still contains `set -eo pipefail` in the container script.
 ## Tests
 - Both sides' test suites must build and run; this merge adds no new feature tests by default.
 - If a conflict resolution changed C++ semantics (it should not), add CTest tests
  under `./qt-migration-legatus/qt6-after/qt6-migrated-legatus/tests/` that pin the
  legacy behavior, registered with CTest, running with `BUILD_RTI=ON` and
  `BUILD_GRANTLEE=ON`, policy-compatible names (`test_<name>.cpp`, ...).
 - No OFF-variant tests. No host-local paths.
 ## Docker and CI
 Authoritative migration Dockerfile:
 - `./app/Dockerfile`
 Authoritative validation scripts (both exist in the tree after the merge; run the
 one(s) whose target groups cover the merged changes, and if in doubt run both):
 - `./qt-migration-legatus/qt6-after/qt6-migrated-legatus/docker_build.sh`
 - `./qt-migration-legatus/qt6-after/qt6-migrated-legatus/new_docker_build.sh`
 Validation container expectations:
 - repository root at `/repo`, or the script's documented mount path
 - external dependencies under `/repo/external` (including `external/rti_connext_dds-7.7.0`, `external/ArcGIS`, `external/GeographicLib` where the scripts expect them)
 - `./rti_license.dat` mounted read-only if RTI requires it
 - no developer-local paths
 Jenkins CI must be able to discover and run the merged test set. Inspect and minimally update only if needed:
 - `./qt-migration-legatus/ci/Dockerfile.*`
 - `./qt-migration-legatus/ci/check_pr_policies.py`
 ## Required procedure
 1. Read the base prompts. Run `git fetch origin` and verify both remote tips and the merge base.
 2. Check out `feature/qt6-migration-basis-modules-merge` in `./qt-migration-legatus` (working tree must be clean).
 3. Re-run the dry-run merge in a throwaway worktree; confirm the conflict list.
 4. Run the real merge: `git merge --no-ff origin/feature/qt6-migration-basis-modules-services` (do not auto-commit; resolve first).
 5. Resolve the conflicts one file at a time using the four-version method (merge base, ours, theirs, legacy) and the rules above.
 6. Run the legacy comparison audit (previous section) over every resolved/edited file.
 7. Run the regression checks: Qt5 links, removed modules, LogViewer, IDL warnings, stub locations, ON-variant-only CMake, docker script integrity, CTest registration union.
 8. Validate in Docker with `BUILD_RTI=ON` and `BUILD_GRANTLEE=ON` (docker_build.sh and, where applicable, new_docker_build.sh).
 9. Run CTest in the validated build directory.
 10. Check Jenkins/policy compatibility.
 11. Create the merge commit (see Commits).
 12. Report factual status.
 Do not push. The merge result stays local on `feature/qt6-migration-basis-modules-merge` until the user says otherwise.
 ## Required validation
 From `./qt-migration-legatus/qt6-after/qt6-migrated-legatus`, run:
 ```bash
 BUILD_RTI=ON BUILD_GRANTLEE=ON ./docker_build.sh
 ```
 and, if its target groups do not cover all merged changes:
 ```bash
 BUILD_RTI=ON BUILD_GRANTLEE=ON ./new_docker_build.sh
 ```
 CTest must run as part of validation. If a direct clean build is useful, use:
 ```bash
 cmake -S /repo/qt-migration-legatus/qt6-after/qt6-migrated-legatus -B /repo/build-merge-rti-on-grantlee-on -G Ninja -DCMAKE_BUILD_TYPE=Debug -DBUILD_RTI=ON -DBUILD_GRANTLEE=ON
 cmake --build /repo/build-merge-rti-on-grantlee-on --parallel
 ctest --test-dir /repo/build-merge-rti-on-grantlee-on --output-on-failure
 ```
 CTest baseline: ctest exits with code 8 when tests are "Not Run". A pre-existing set of Not Run tests (for example nglcomp_test, aes/avm/exm/scm/bld suites, GrantleeParserSmoke) belongs to sibling targets outside the docker build scripts' make list and existed before this migration series; that set is not a failure. Treat only `***Failed` entries as failures. Do not widen this exception to skip real failures, and do not add missing sibling targets to fix the exit code. If a previously passing test becomes Not Run or Failed after the merge, that is a merge regression: fix it or report it as a blocker.
 Do not run or validate OFF variants.
 ## Commits
 - Single author: the user's git identity. The user is the only author; do not add any co-author, co-authored-by, or bot attribution lines of any kind.
 - Commit message: maximum 2 lines (one subject line plus at most one short body line), no blank-line separators, no extra metadata.
 - Merge commit subject example (2 lines max):
  `Merge feature/qt6-migration-basis-modules-services into feature/qt6-migration-basis-modules`
  body line: `Resolves 17 conflicts against legacy Qt5 semantics; validates with BUILD_RTI=ON BUILD_GRANTLEE=ON.`
 - If a conflict resolution requires an additional fix commit on top of the merge commit, the same 2-line / single-author rules apply.
 - Follow `./prompts/commit-policy.prompt.md` for repository mapping and pre-commit checks. If it requires signed commits and signing is not configured in this repository context, stop and report the exact reason instead of committing unsigned.
 ## Success criteria
 Success requires:
 - `feature/qt6-migration-basis-modules-merge` contains a merge commit with both parents `origin/feature/qt6-migration-basis-modules` (or its verified successor tip) and `origin/feature/qt6-migration-basis-modules-services` (or its verified successor tip)
 - all 17 conflicts resolved with the four-version method; resolution evidence recorded
 - both branches' functionality preserved: Viewer/GROUP5 and DDS/Proxies/./Z work from the basis-modules side, and the full rtiddsgen services/proxies/plugins migration plus NMEA tests from the services side
 - legacy comparison audit done for every resolved file; zero unexplained `semantic-change` hunks
 - configure, build, and CTest pass with `BUILD_RTI=ON` and `BUILD_GRANTLEE=ON`
 - the docker build script(s) run the merged test set and fail on test failure
 - Jenkins/policy discovery accepts the merged test set
 - no active Qt5 imported target links remain in the merged tree
 - generated outputs are build-tree only, freshly produced, never committed or consumed from the source tree
 - no fake generated files, dummy files, mocks, placeholders, or stubbed generated outputs
 - required stubs/forward declarations only in allowed directories
 - removed modules remain removed; LogViewer preserved
 - no OFF-variant logic, tests, or stubs introduced
 - no push performed
 ## If blocked
 Do not fake success. Report:
 - failing command
 - key error output
 - affected file/branch
 - category: project, path, merge, CMake, Qt API, codegen, Docker, RTI/license, Grantlee/KTextTemplate, test, CTest, Jenkins CI, stub relocation, or environment
 - which side (ours/theirs) the problematic hunk came from
 - what was resolved safely
 - what remains blocked
 - whether stale artifacts were ruled out
 - whether generated files were involved
 - exact missing files, targets, or generator step
 - whether tests and CTest integration succeeded
 - whether Docker validation and Jenkins discovery succeeded
 - the legacy comparison status for the unresolved files
 ## Final report
 Keep it short. Include:
 - status: validated, partially validated, or blocked
 - merge commit hash, both parents, branch name
 - per-conflicted-file resolution: file, method (union / four-version semantic / keep-deletion / port-modification), and the one-line reason
 - modify/delete outcomes for the 5 stub/test files (kept deleted or relocated, and where the basis-modules modification went)
 - legacy comparison audit summary: per-file hunk counts by category, and every `semantic-change` hunk with its justification or fix
 - files changed beyond the conflicted set
 - CTest registration union check result
 - Docker and Jenkins CI changes
 - Qt5 references removed or remaining
 - confirmation that removed modules were not restored and LogViewer was preserved
 - confirmation that both branches' target sets are present after the merge
 - exact validation commands and results
 - remaining blockers or risks
@@ -0,0 +1,377 @@
 # Strict Qt6 Migration Prompt: CMake targets in predefined folders:
 ./Lts/Projects
 ./Lts/Application
 This prompt is binding task context. Keep changes minimal, scoped, and reproducible.
 ## Required base prompt
 Before making changes, read and apply:
 - ./prompts/combined-migration-subfolder-rti-compact.prompt.md
 - ./prompts/combined-migration-compact.prompt.md
 If these prompts are stricter, follow them. This prompt overrides them only for build variants: use ON variants only. Do not pursue OFF variants.
 ## Module in scope
 Migrate only:
 - cmake targets under these predefined folders:
 ./Lts/Projects
 ./Lts/Application
 From:
 - ./qt-migration-legatus/qt5-before/qt5-legatus-legacy
 To:
 - ./qt-migration-legatus/qt6-after/qt6-migrated-legatus
 Do not migrate sibling tools or unrelated modules.
 ## Mandatory build variants
 Only these variants are valid:
 - BUILD_RTI=ON
 - BUILD_GRANTLEE=ON
 - BUILD_ARCGIS=ON
 Forbidden:
 - BUILD_RTI=OFF
 - BUILD_GRANTLEE=OFF
 - BUILD_ARCGIS=OFF
 Rules:
 - Do not implement, fix, preserve, test, or validate OFF variants.
 - Do not add CMake logic, tests, stubs, or fallbacks for OFF variants.
 - Do not report OFF variants as supported or partially supported.
 - Validation must use BUILD_RTI=ON and BUILD_GRANTLEE=ON and BUILD_ARCGIS=ON.
 ## Branches and trees
 Qt6 target branch:
 - feature/migrate-lts-projects-and-application
 Qt5 legacy branch, if comparison is needed:
 - story/qt6-migration
 Legacy source tree:
 - ./qt-migration-legatus/qt5-before/qt5-legatus-legacy
 Qt6 target tree:
 - ./qt-migration-legatus/qt6-after/qt6-migrated-legatus
 Work in the Qt6 target tree only. Do not modify the Qt5 legacy tree.
 ## Scope rules
 Touch files outside the targets directories only when directly required to configure, generate, build, link, test, or validate these targets.
 Allowed outside-scope changes:
 - parent CMakeLists.txt entries for these targets
 - central CMake helper fixes required by these targets
 - shared include path fixes required by these targets
 - RTI, codegen, ndsgen, KTextTemplate, or Grantlee integration fixes required by these targets
 - test infrastructure needed by tests for these targets
 - new_docker_build.sh changes needed to run those tests
 - minimal Jenkins CI discovery or policy updates needed for those tests
 - relocation of required stubs or forward declarations to allowed directories
 Not allowed:
 - restoring removed modules
 - reintroducing stale dependencies on removed modules
 - removing or disabling active modules to hide failures
 - disabling targets instead of fixing root causes
 - broad refactoring, cleanup, renaming, or modernization
 - warning suppression instead of fixing causes
 - committing generated files
 - consuming generated outputs from the source tree
 - fake success, dummy files, handwritten generated replacements, mocks, placeholders, or generated-output stubs
 ## CMake targets
 - under folder ./qt-migration-legatus/qt6-after/qt6-migrated-legatus/
 ./Lts/Projects
 ./Lts/Application
 - Discover real CMake targets defined in the predefined folders.
 - Learn options of script ./qt-migration-legatus/qt6-after/qt6-migrated-legatus/new_docker_build.sh to improve peformance of migration process
 - Reuse prebuilt migration image as much as possible
 - Add every required CMake target to ./qt-migration-legatus/qt6-after/qt6-migrated-legatus/new_docker_build.sh so the validation container builds or validates it.
 - Add new --groupXYZ options for required CMake targets where XYZ refers to valid integers
 - Add required apt packages to new_docker_build.sh
 - Do not invent CMake targets under perdefined folders.
 - Do not add targets that do not exist.
 - If a folder does not exist, has no CMake targets, or a target is intentionally out of scope, report that fact and the reason.
 - Do not weaken validation to make CMake targets under predefined folders pass.
 ## Preservation rules
 Preserve module removals from commit:
 - 92ad7d468, "remove all unneeded module listed from Niklas"
 Do not restore removed modules, files, targets, directories, or dependencies.
 Preserve LogViewer reinsert from commit:
 - 1fa789767, "Added LogViewer again"
 Do not remove, disable, or break LogViewer integration.
 Preserve prior IDL warning fixes from commit:
 - be912de9d, "Removes .IDL warnings: multiple enum definitons and builtin-type collisions"
 Do not blindly replay that commit. Use it only as reference. Do not reintroduce removed modules.
 IDL regressions to avoid:
 - multiple enum definitions
 - duplicate enumerators
 - builtin type or keyword collisions
 Check first for duplicate inputs, stale paths, removed-module references, source-tree generated outputs, source/build-tree confusion, and repeated IDL definitions before treating an issue as semantic IDL conflict.
 ## Stubs and forward declarations
 Any required existing stub, compatibility declaration, or forward declaration must live only under:
 - ./qt-migration-legatus/qt6-after/qt6-migrated-legatus/forward-declarations/
 - ./qt-migration-legatus/qt6-after/qt6-migrated-legatus/include/
 Rules:
 - Do not leave such files in service directories unless they are real service source files.
 - Do not create or keep stubs for forbidden OFF variants.
 - Do not use stubs or forward declarations as replacements for real RTI, ndsgen, KTextTemplate, or Grantlee outputs in ON builds.
 - Report every moved, removed, or newly referenced stub/forward declaration.
 ## Migration checks
 For each cmake target, inspect and migrate only as needed:
 - source and header files
 - CMakeLists.txt and parent CMake registration
 - ui, qrc, resource, plugin, and service metadata
 - RTI IDL, ndsgen, KTextTemplate, and Grantlee inputs/templates
 - tests directly tied to these targets
 Fix only real Qt6/C++17 build issues, such as:
 - Qt module imports and target links
 - moc, uic, and rcc handling
 - QRegExp to QRegularExpression when required
 - QTextCodec replacement when required
 - QDesktopWidget or QApplication::desktop() replacement when required
 - QString, QVariant, QMetaType, QDateTime, QAction, QMenu, signal/slot, enum, plugin, or metadata compatibility issues when required
 No opportunistic refactoring or style cleanup.
 ## Qt link rules
 No active target in the Qt6 tree may link Qt5 imported targets.
 Search for and fix active uses of:
 - Qt5::
 - find_package(Qt5
 - QT5_
 - Qt5Core
 - Qt5Widgets
 - Qt5Network
 Use Qt6 equivalents. Prefer central CMake helper fixes when the issue is central.
 ## Code generation rules
 If generated files are required:
 - reconstruct the real legacy generation flow
 - generate into the build tree
 - consume from the build tree
 - list complete OUTPUT and BYPRODUCTS
 - set correct DEPENDS and MAIN_DEPENDENCY where useful
 - use deterministic WORKING_DIRECTORY
 - use VERBATIM
 - wire generated sources with target_sources
 - wire generated include dirs with target_include_directories
 - ensure compilation depends on generation
 - ensure incremental rebuilds trigger on input/template changes
 Never commit generated .idl, .h, .hpp, or .cpp outputs. Never consume generated outputs from the source tree. Never fabricate generated outputs.
 ## Tests
 For every C++ code change, add three meaningful CTest tests where feasible.
 Rules:
 - tests must validate changed behavior, not only compilation
 - tests must be registered with CTest
 - tests must run with BUILD_RTI=ON and BUILD_GRANTLEE=ON and BUILD_ARCGIS=ON
 - do not add OFF-variant tests
 - use deterministic tests without host-local paths
 - if three meaningful tests are impossible, add the maximum meaningful set and explain why
 - ./qt-migration-legatus/qt6-after/qt6-migrated-legatus/new_docker_build.sh changes needed to run those tests
 - ./qt-migration-legatus/qt6-after/qt6-migrated-legatus/new_docker_build.sh changes needed to build or validate required CMake targets under folder ./qt-migration-legatus/qt6-after/qt6-migrated-legatus/Lts/Viewer
 Preferred location:
 - ./qt-migration-legatus/qt6-after/qt6-migrated-legatus/tests
 Use policy-compatible names, for example:
 - test_<name>.cpp
 - <name>_test.cpp
 - <name>test.cpp
 - <name>gtest.cpp
 ## Docker and CI
 Authoritative migration Dockerfile:
 - ./app/Dockerfile
 Authoritative validation script:
 - ./qt-migration-legatus/qt6-after/qt6-migrated-legatus/new_docker_build.sh
 Do not use other Dockerfiles as task authority.
 Validation container expectations:
 - repository root at /repo, or the script's documented mount path
 - external dependencies under /repo/external, or the script's documented equivalent
 - RTI 7.7 at /repo/external/rti_connext_dds-7.7.0, or documented equivalent
 - ./rti_license.dat mounted read-only if RTI requires it
 - no developer-local paths
 Jenkins CI must be able to discover and run the new tests, or verify that new_docker_build.sh runs them. Inspect and minimally update only if needed:
 - ./qt-migration-legatus/ci/Dockerfile.*
 - ./qt-migration-legatus/ci/check_pr_policies.py
 ### External dependencies to be mapped into Docker container
 - `./external`
 - expected subfolders:
  - `./external/ArcGIS`
  - `./external/GeographicLib`
  - `./external/rti_connext_dds-7.7.0`
 ### RTI license
 - `./rti_license.dat`
 ## Required procedure
 1. Inspect repository state, branch, working tree, submodules, required prompts, service paths, and forward-declaration directories.
 2. Compare Qt5 source targets with Qt6 targets. Classify files as already migrated, missing, stale, generated, intentionally removed, build-only, or needing Qt6 adaptation.
 3. Identify dependencies, generated inputs, Qt modules, parent CMake entries, removed-module references, LogViewer interactions, and required stub/forward-declaration relocations.
 4. Apply the smallest valid migration changes.
 5. Add required CTest tests for C++ changes.
 6. Review RTI, ndsgen, KTextTemplate, and Grantlee generation paths.
 7. Check regressions: Qt5 links, removed modules, LogViewer, IDL warnings, source-tree generated consumption, stale artifacts, and misplaced stubs.
 8. Validate in Docker with BUILD_RTI=ON and BUILD_GRANTLEE=ON.
 9. Run CTest in the validated build directory.
 10. Check Jenkins/policy compatibility.
 11. Report factual status.
 Do not overwrite uncommitted user changes. If they block safe work, report the blocker.
 ## Required validation
 From:
 - ./qt-migration-legatus/qt6-after/qt6-migrated-legatus
 Run:
 ```bash
 BUILD_RTI=ON BUILD_GRANTLEE=ON BUILD_ARCGIS=ON ./new_docker_build.sh
 ```
 CTest must run as part of validation. If a direct clean build is useful, use:
 ```bash
 cmake -S /repo/qt-migration-legatus/qt6-after/qt6-migrated-legatus -B /repo/build-rti-on-grantlee-on -G Ninja -DCMAKE_BUILD_TYPE=Debug -DBUILD_RTI=ON -DBUILD_GRANTLEE=ON -DBUILD_ARCGIS=ON
 cmake --build /repo/build-rti-on-grantlee-on --parallel
 ctest --test-dir /repo/build-rti-on-grantlee-on --output-on-failure
 ```
 Also check whether this file exists and run it only if present:
 ```bash
 ./new_docker-build.h
 ```
 If it is absent or a typo, report that. Do not invent a replacement.
 Do not run or validate OFF variants.
 ## Success criteria
 Success requires:
 - cmake targets migrated or confirmed already correct
 - cmake targets included in the Qt6 build
 - configure, build, and CTest pass with BUILD_RTI=ON and BUILD_GRANTLEE=ON and BUILD_ARCGIS=ON
 - new_docker_build.sh runs the relevant tests and fails on test failure
 - Jenkins/policy discovery accepts the new tests and validation changes
 - no active Qt5 imported target links remain for these targets
 - generated outputs are build-tree only and freshly produced when required
 - no generated outputs are committed or consumed from the source tree
 - no fake generated files, dummy files, mocks, placeholders, or stubbed generated outputs exist
 - required stubs/forward declarations are only in allowed directories
 - removed modules remain removed
 - LogViewer remains preserved
 - RTI/codegen and Grantlee/KTextTemplate success is real, not stale or faked
 ## If blocked
 Do not fake success. Report:
 - failing command
 - key error output
 - affected service
 - category: project, path, merge, CMake, Qt API, codegen, Docker, RTI/license, Grantlee/KTextTemplate, ArcGIS, test, CTest, Jenkins CI, stub relocation, or environment
 - what was fixed safely
 - what remains blocked
 - whether stale artifacts were ruled out
 - whether generated files were involved
 - exact missing files, targets, or generator step
 - whether tests and CTest integration succeeded
 - whether Docker validation and Jenkins discovery succeeded
 ## Final report
 Keep it short. Include:
 - status: validated, partially validated, or blocked
 - cmake targets under predefined folders migrated or already correct
 - files changed
 - C++ files changed
 - tests added per C++ change
 - CTest registration changes
 - CMake and generator changes
 - stub/forward-declaration moves or removals
 - Docker and Jenkins CI changes
 - Qt5 references removed or remaining
 - confirmation that removed modules were not restored
 - confirmation that LogViewer was preserved
 - exact validation commands and results
 - result of new_docker-build.h if present
 - remaining blockers or risks
@@ -0,0 +1,404 @@
 # Strict Qt6 Migration Prompt: CMake targets in predefined folders:
 ./Lts/Tools/DBAdministration
 ./Lts/Tools/DBOperatorSettingsRemover
 ./Lts/Tools/DBUpdate
 ./Lts/Tools/DataSampleGenerator
 ./Lts/Tools/DataSampleReceiver
 ./Lts/Tools/DateTimeSyncer
 ./Lts/Tools/DdsView
 ./Lts/Tools/DotMatrixDisplay
 ./Lts/Tools/LicenceEditor
 ./Lts/Tools/LocalDomainFinder
 ./Lts/Tools/LogViewer
 This prompt is binding task context. Keep changes minimal, scoped, and reproducible.
 ## Required base prompt
 Before making changes, read and apply:
 - ./prompts/combined-migration-subfolder-rti-compact.prompt.md
 - ./prompts/combined-migration-compact.prompt.md
 If these prompts are stricter, follow them. This prompt overrides them only for build variants: use ON variants only. Do not pursue OFF variants.
 ## Module in scope
 Migrate only:
 - cmake targets under these predefined folders:
 ./Lts/Tools/DBAdministration
 ./Lts/Tools/DBOperatorSettingsRemover
 ./Lts/Tools/DBUpdate
 ./Lts/Tools/DataSampleGenerator
 ./Lts/Tools/DataSampleReceiver
 ./Lts/Tools/DateTimeSyncer
 ./Lts/Tools/DdsView
 ./Lts/Tools/DotMatrixDisplay
 ./Lts/Tools/LicenceEditor
 ./Lts/Tools/LocalDomainFinder
 ./Lts/Tools/LogViewer
 From:
 - ./qt-migration-legatus/qt5-before/qt5-legatus-legacy
 To:
 - ./qt-migration-legatus/qt6-after/qt6-migrated-legatus
 Do not migrate sibling tools or unrelated modules.
 ## Mandatory build variants
 Only these variants are valid:
 - BUILD_RTI=ON
 - BUILD_GRANTLEE=ON
 - BUILD_ARCGIS=OFF
 - BUILD_ARCGIS=ON
 Forbidden:
 - BUILD_RTI=OFF
 - BUILD_GRANTLEE=OFF
 Rules:
 - Do not implement, fix, preserve, test, or validate OFF variants.
 - Do not add CMake logic, tests, stubs, or fallbacks for OFF variants.
 - Do not report OFF variants as supported or partially supported.
 - Validation must use BUILD_RTI=ON and BUILD_GRANTLEE=ON and BUILD_ARCGIS=ON.
 ## Branches and trees
 Qt6 target branch:
 - feature/migrate-lts-tools-d-and-l
 Qt5 legacy branch, if comparison is needed:
 - story/qt6-migration
 Legacy source tree:
 - ./qt-migration-legatus/qt5-before/qt5-legatus-legacy
 Qt6 target tree:
 - ./qt-migration-legatus/qt6-after/qt6-migrated-legatus
 Work in the Qt6 target tree only. Do not modify the Qt5 legacy tree.
 ## Scope rules
 Touch files outside the targets directories only when directly required to configure, generate, build, link, test, or validate these targets.
 Allowed outside-scope changes:
 - parent CMakeLists.txt entries for these targets
 - central CMake helper fixes required by these targets
 - shared include path fixes required by these targets
 - RTI, codegen, ndsgen, KTextTemplate, or Grantlee integration fixes required by these targets
 - test infrastructure needed by tests for these targets
 - new_docker_build.sh changes needed to run those tests
 - minimal Jenkins CI discovery or policy updates needed for those tests
 - relocation of required stubs or forward declarations to allowed directories
 Not allowed:
 - restoring removed modules
 - reintroducing stale dependencies on removed modules
 - removing or disabling active modules to hide failures
 - disabling targets instead of fixing root causes
 - broad refactoring, cleanup, renaming, or modernization
 - warning suppression instead of fixing causes
 - committing generated files
 - consuming generated outputs from the source tree
 - fake success, dummy files, handwritten generated replacements, mocks, placeholders, or generated-output stubs
 ## CMake targets
 - under folder ./qt-migration-legatus/qt6-after/qt6-migrated-legatus/
 ./Lts/Tools/DBAdministration
 ./Lts/Tools/DBOperatorSettingsRemover
 ./Lts/Tools/DBUpdate
 ./Lts/Tools/DataSampleGenerator
 ./Lts/Tools/DataSampleReceiver
 ./Lts/Tools/DateTimeSyncer
 ./Lts/Tools/DdsView
 ./Lts/Tools/DotMatrixDisplay
 ./Lts/Tools/LicenceEditor
 ./Lts/Tools/LocalDomainFinder
 ./Lts/Tools/LogViewer
 - Discover real CMake targets defined in the predefined folders.
 - Learn options of script ./qt-migration-legatus/qt6-after/qt6-migrated-legatus/new_docker_build.sh to improve peformance of migration process
 - Reuse prebuilt migration image as much as possible
 - Add every required CMake target to ./qt-migration-legatus/qt6-after/qt6-migrated-legatus/new_docker_build.sh so the validation container builds or validates it.
 - Add new --group6 option for required CMake targets
 - Add required apt packages to new_docker_build.sh
 - Do not invent CMake targets under perdefined folders.
 - Do not add targets that do not exist.
 - If a folder does not exist, has no CMake targets, or a target is intentionally out of scope, report that fact and the reason.
 - Do not weaken validation to make CMake targets under predefined folders pass.
 ## Preservation rules
 Preserve module removals from commit:
 - 92ad7d468, "remove all unneeded module listed from Niklas"
 Do not restore removed modules, files, targets, directories, or dependencies.
 Preserve LogViewer reinsert from commit:
 - 1fa789767, "Added LogViewer again"
 Do not remove, disable, or break LogViewer integration.
 Preserve prior IDL warning fixes from commit:
 - be912de9d, "Removes .IDL warnings: multiple enum definitons and builtin-type collisions"
 Do not blindly replay that commit. Use it only as reference. Do not reintroduce removed modules.
 IDL regressions to avoid:
 - multiple enum definitions
 - duplicate enumerators
 - builtin type or keyword collisions
 Check first for duplicate inputs, stale paths, removed-module references, source-tree generated outputs, source/build-tree confusion, and repeated IDL definitions before treating an issue as semantic IDL conflict.
 ## Stubs and forward declarations
 Any required existing stub, compatibility declaration, or forward declaration must live only under:
 - ./qt-migration-legatus/qt6-after/qt6-migrated-legatus/forward-declarations/
 - ./qt-migration-legatus/qt6-after/qt6-migrated-legatus/include/
 Rules:
 - Do not leave such files in service directories unless they are real service source files.
 - Do not create or keep stubs for forbidden OFF variants.
 - Do not use stubs or forward declarations as replacements for real RTI, ndsgen, KTextTemplate, or Grantlee outputs in ON builds.
 - Report every moved, removed, or newly referenced stub/forward declaration.
 ## Migration checks
 For each cmake target, inspect and migrate only as needed:
 - source and header files
 - CMakeLists.txt and parent CMake registration
 - ui, qrc, resource, plugin, and service metadata
 - RTI IDL, ndsgen, KTextTemplate, and Grantlee inputs/templates
 - tests directly tied to these targets
 Fix only real Qt6/C++17 build issues, such as:
 - Qt module imports and target links
 - moc, uic, and rcc handling
 - QRegExp to QRegularExpression when required
 - QTextCodec replacement when required
 - QDesktopWidget or QApplication::desktop() replacement when required
 - QString, QVariant, QMetaType, QDateTime, QAction, QMenu, signal/slot, enum, plugin, or metadata compatibility issues when required
 No opportunistic refactoring or style cleanup.
 ## Qt link rules
 No active target in the Qt6 tree may link Qt5 imported targets.
 Search for and fix active uses of:
 - Qt5::
 - find_package(Qt5
 - QT5_
 - Qt5Core
 - Qt5Widgets
 - Qt5Network
 Use Qt6 equivalents. Prefer central CMake helper fixes when the issue is central.
 ## Code generation rules
 If generated files are required:
 - reconstruct the real legacy generation flow
 - generate into the build tree
 - consume from the build tree
 - list complete OUTPUT and BYPRODUCTS
 - set correct DEPENDS and MAIN_DEPENDENCY where useful
 - use deterministic WORKING_DIRECTORY
 - use VERBATIM
 - wire generated sources with target_sources
 - wire generated include dirs with target_include_directories
 - ensure compilation depends on generation
 - ensure incremental rebuilds trigger on input/template changes
 Never commit generated .idl, .h, .hpp, or .cpp outputs. Never consume generated outputs from the source tree. Never fabricate generated outputs.
 ## Tests
 For every C++ code change, add three meaningful CTest tests where feasible.
 Rules:
 - tests must validate changed behavior, not only compilation
 - tests must be registered with CTest
 - tests must run with BUILD_RTI=ON and BUILD_GRANTLEE=ON and BUILD_ARCGIS=ON
 - do not add OFF-variant tests
 - use deterministic tests without host-local paths
 - if three meaningful tests are impossible, add the maximum meaningful set and explain why
 - ./qt-migration-legatus/qt6-after/qt6-migrated-legatus/new_docker_build.sh changes needed to run those tests
 - ./qt-migration-legatus/qt6-after/qt6-migrated-legatus/new_docker_build.sh changes needed to build or validate required CMake targets under folder ./qt-migration-legatus/qt6-after/qt6-migrated-legatus/Lts/Viewer
 Preferred location:
 - ./qt-migration-legatus/qt6-after/qt6-migrated-legatus/tests
 Use policy-compatible names, for example:
 - test_<name>.cpp
 - <name>_test.cpp
 - <name>test.cpp
 - <name>gtest.cpp
 ## Docker and CI
 Authoritative migration Dockerfile:
 - ./app/Dockerfile
 Authoritative validation script:
 - ./qt-migration-legatus/qt6-after/qt6-migrated-legatus/new_docker_build.sh
 Do not use other Dockerfiles as task authority.
 Validation container expectations:
 - repository root at /repo, or the script's documented mount path
 - external dependencies under /repo/external, or the script's documented equivalent
 - RTI 7.7 at /repo/external/rti_connext_dds-7.7.0, or documented equivalent
 - ./rti_license.dat mounted read-only if RTI requires it
 - no developer-local paths
 Jenkins CI must be able to discover and run the new tests, or verify that new_docker_build.sh runs them. Inspect and minimally update only if needed:
 - ./qt-migration-legatus/ci/Dockerfile.*
 - ./qt-migration-legatus/ci/check_pr_policies.py
 ### External dependencies to be mapped into Docker container
 - `./external`
 - expected subfolders:
  - `./external/ArcGIS`
  - `./external/GeographicLib`
  - `./external/rti_connext_dds-7.7.0`
 ### RTI license
 - `./rti_license.dat`
 ## Required procedure
 1. Inspect repository state, branch, working tree, submodules, required prompts, service paths, and forward-declaration directories.
 2. Compare Qt5 source targets with Qt6 targets. Classify files as already migrated, missing, stale, generated, intentionally removed, build-only, or needing Qt6 adaptation.
 3. Identify dependencies, generated inputs, Qt modules, parent CMake entries, removed-module references, LogViewer interactions, and required stub/forward-declaration relocations.
 4. Apply the smallest valid migration changes.
 5. Add required CTest tests for C++ changes.
 6. Review RTI, ndsgen, KTextTemplate, and Grantlee generation paths.
 7. Check regressions: Qt5 links, removed modules, LogViewer, IDL warnings, source-tree generated consumption, stale artifacts, and misplaced stubs.
 8. Validate in Docker with BUILD_RTI=ON and BUILD_GRANTLEE=ON.
 9. Run CTest in the validated build directory.
 10. Check Jenkins/policy compatibility.
 11. Report factual status.
 Do not overwrite uncommitted user changes. If they block safe work, report the blocker.
 ## Required validation
 From:
 - ./qt-migration-legatus/qt6-after/qt6-migrated-legatus
 Run:
 ```bash
 BUILD_RTI=ON BUILD_GRANTLEE=ON BUILD_ARCGIS=ON ./new_docker_build.sh
 ```
 CTest must run as part of validation. If a direct clean build is useful, use:
 ```bash
 cmake -S /repo/qt-migration-legatus/qt6-after/qt6-migrated-legatus -B /repo/build-rti-on-grantlee-on -G Ninja -DCMAKE_BUILD_TYPE=Debug -DBUILD_RTI=ON -DBUILD_GRANTLEE=ON -DBUILD_ARCGIS=ON
 cmake --build /repo/build-rti-on-grantlee-on --parallel
 ctest --test-dir /repo/build-rti-on-grantlee-on --output-on-failure
 ```
 Also check whether this file exists and run it only if present:
 ```bash
 ./new_docker-build.h
 ```
 If it is absent or a typo, report that. Do not invent a replacement.
 Do not run or validate OFF variants.
 ## Success criteria
 Success requires:
 - cmake targets migrated or confirmed already correct
 - cmake targets included in the Qt6 build
 - configure, build, and CTest pass with BUILD_RTI=ON and BUILD_GRANTLEE=ON and BUILD_ARCGIS=ON
 - new_docker_build.sh runs the relevant tests and fails on test failure
 - Jenkins/policy discovery accepts the new tests and validation changes
 - no active Qt5 imported target links remain for these targets
 - generated outputs are build-tree only and freshly produced when required
 - no generated outputs are committed or consumed from the source tree
 - no fake generated files, dummy files, mocks, placeholders, or stubbed generated outputs exist
 - required stubs/forward declarations are only in allowed directories
 - removed modules remain removed
 - LogViewer remains preserved
 - RTI/codegen and Grantlee/KTextTemplate success is real, not stale or faked
 ## If blocked
 Do not fake success. Report:
 - failing command
 - key error output
 - affected service
 - category: project, path, merge, CMake, Qt API, codegen, Docker, RTI/license, Grantlee/KTextTemplate, ArcGIS, test, CTest, Jenkins CI, stub relocation, or environment
 - what was fixed safely
 - what remains blocked
 - whether stale artifacts were ruled out
 - whether generated files were involved
 - exact missing files, targets, or generator step
 - whether tests and CTest integration succeeded
 - whether Docker validation and Jenkins discovery succeeded
 ## Final report
 Keep it short. Include:
 - status: validated, partially validated, or blocked
 - cmake targets under predefined folders migrated or already correct
 - files changed
 - C++ files changed
 - tests added per C++ change
 - CTest registration changes
 - CMake and generator changes
 - stub/forward-declaration moves or removals
 - Docker and Jenkins CI changes
 - Qt5 references removed or remaining
 - confirmation that removed modules were not restored
 - confirmation that LogViewer was preserved
 - exact validation commands and results
 - result of new_docker-build.h if present
 - remaining blockers or risks
@@ -0,0 +1,429 @@
 # Strict Qt6 Migration Prompt: NmeaManagement Service
 This prompt is binding task context. Keep changes minimal, scoped, and reproducible.
 ## Required base prompt
 Before making changes, read and apply:
 - ./prompts/combined-migration-subfolder-rti-compact.prompt.md
 If that prompt is stricter, follow it. This prompt overrides it only for build variants: use ON variants only. Do not pursue OFF variants.
 ## Service in scope
 Migrate only:
 - **Lts/Services/NmeaManagement**
 All rules below apply exactly to this service and its direct build, generation, and test dependencies. Do not touch other services or unrelated modules.
 ## Status of this service
 The NmeaManagement service directory already exists in the Qt6 tree (`qt-migration-legatus/qt6-after/qt6-migrated-legatus/Lts/Services/NmeaManagement/`) and its source files have been migrated from Qt5 to Qt6:
 - Include paths modernized (`#include <QX>` → `#include <QtCore/QX>`, `#include <QtWidgets/QX>`, `#include <QtGui/QX>`)
 - `QRegExp` → `QRegularExpression` (nmea_handler.cpp)
 - Signal/slot macros → type-safe connections (`connect(m_reconnectTimer, SIGNAL(timeout()), ...) → connect(m_reconnectTimer, &QTimer::timeout, ...)`)
 - `QDesktopWidget` → `QScreen` (nme_battery_info_dialog.cpp in the plugin)
 - `QT5_WRAP_UI` → no-op shim (NGLMacros.cmake, AUTOUIC handles `.ui` files)
 - CMakeLists.txt migrated: `Qt5::` → `Qt6::`, codegen steps wrapped in `IF(BUILD_RTI)`
 - `ddscore` and `ddsconnector` → conditional `$<IF:$<TARGET_EXISTS:...>>`
 **The only thing preventing the service from building is that `ADD_SUBDIRECTORY(NmeaManagement)` is commented out in `Lts/Services/CMakeLists.txt` (line 28).**
 ## From / To
 From:
 - `./qt-migration-legatus/qt5-before/qt5-legatus-legacy/Lts/Services/NmeaManagement/`
 To:
 - `./qt-migration-legatus/qt6-after/qt6-migrated-legatus/Lts/Services/NmeaManagement/`
 Do not migrate sibling services, sibling plugins, or unrelated modules.
 ## Mandatory build variants
 Only these variants are valid:
 - `BUILD_RTI=ON`
 - `BUILD_GRANTLEE=ON`
 Forbidden:
 - `BUILD_RTI=OFF`
 - `BUILD_GRANTLEE=OFF`
 Rules:
 - Do not implement, fix, preserve, test, or validate OFF variants.
 - Do not add CMake logic, tests, stubs, or fallbacks for OFF variants.
 - Do not report OFF variants as supported or partially supported.
 - Validation must use `BUILD_RTI=ON` and `BUILD_GRANTLEE=ON`.
 ## Branches and trees
 Qt6 target branch:
 - `feature/qt6-migration-basis-modules`
 Qt5 legacy branch, if comparison is needed:
 - `story/qt6-migration`
 Legacy source tree:
 - `./qt-migration-legatus/qt5-before/qt5-legatus-legacy`
 Qt6 target tree:
 - `./qt-migration-legatus/qt6-after/qt6-migrated-legatus`
 Work in the Qt6 target tree only. Do not modify the Qt5 legacy tree.
 ## Scope rules
 Touch files outside `Lts/Services/NmeaManagement/` only when directly required to configure, generate, build, link, test, or validate this service.
 Allowed outside-scope changes:
 - `Lts/Services/CMakeLists.txt` — uncommenting `ADD_SUBDIRECTORY(NmeaManagement)`
 - central CMake helper fixes required by this service
 - shared include path fixes required by this service
 - RTI, codegen, ndsgen, KTextTemplate, or Grantlee integration fixes required by this service
 - test infrastructure needed by tests for this service
 - docker_build.sh changes needed to run those tests
 - minimal Jenkins CI discovery or policy updates needed for those tests
 - relocation of required stubs or forward declarations to allowed directories
 Not allowed:
 - restoring removed modules (commit `92ad7d468`)
 - reintroducing stale dependencies on removed modules
 - removing or disabling active modules to hide failures
 - disabling targets instead of fixing root causes
 - broad refactoring, cleanup, renaming, or modernization
 - warning suppression instead of fixing causes
 - committing generated files
 - consuming generated outputs from the source tree
 - fake success, dummy files, handwritten generated replacements, mocks, placeholders, or generated-output stubs
 ## Preservation rules
 Preserve module removals from commit:
 - `92ad7d468`, "remove all unneeded module listed from Niklas"
 Do not restore removed modules, files, targets, directories, or dependencies.
 Preserve LogViewer reinsert from commit:
 - `1fa789767`, "Added LogViewer again"
 Do not remove, disable, or break LogViewer integration.
 Preserve prior IDL warning fixes from commit:
 - `be912de9d`, "Removes .IDL warnings: multiple enum definitons and builtin-type collisions"
 Do not blindly replay that commit. Use it only as reference. Do not reintroduce removed modules.
 IDL regressions to avoid:
 - multiple enum definitions
 - duplicate enumerators
 - builtin type or keyword collisions
 Check first for duplicate inputs, stale paths, removed-module references, source-tree generated outputs, source/build-tree confusion, and repeated IDL definitions before treating an issue as semantic IDL conflict.
 ## Stubs and forward declarations
 Any required existing stub, compatibility declaration, or forward declaration must live only under:
 - `./qt-migration-legatus/qt6-after/qt6-migrated-legatus/forward-declarations/`
 - `./qt-migration-legatus/qt6-after/qt6-migrated-legatus/.forward-declarations/include/`
 Rules:
 - Do not leave such files in service directories unless they are real service source files.
 - Do not create or keep stubs for forbidden OFF variants.
 - Do not use stubs or forward declarations as replacements for real RTI, ndsgen, KTextTemplate, or Grantlee outputs in ON builds.
 - Report every moved, removed, or newly referenced stub/forward declaration.
 ## Migration checks
 Inspect and migrate only as needed:
 - source and header files in `Lts/Services/NmeaManagement/`
 - `CMakeLists.txt` and parent CMake registration
 - RTI IDL (`nme_service.xml`), ndsgen, KTextTemplate, and Grantlee inputs/templates
 - tests directly tied to this service
 The source files are already migrated. Focus on:
 1. **Uncommenting** `ADD_SUBDIRECTORY(NmeaManagement)` in `Lts/Services/CMakeLists.txt`
 2. **Fixing any compile errors** that surface after the service is added to the build
 3. **Verifying codegen** (`nme_service.xml` → `.idl` → `.hpp`/`.cpp`) produces expected outputs
 4. **Verifying Qt module links** (the executable links `Qt6::Core`, `Qt6::Network`, `svcCoreClient`, etc.)
 Fix only real Qt6/C++17 build issues. No opportunistic refactoring or style cleanup.
 ## Qt link rules
 No active target in the Qt6 tree may link Qt5 imported targets.
 Search for and fix active uses of:
 - `Qt5::`
 - `find_package(Qt5`
 - `QT5_`
 - `Qt5Core`
 - `Qt5Widgets`
 - `Qt5Network`
 Use Qt6 equivalents. Prefer central CMake helper fixes when the issue is central.
 ## Code generation rules
 The NmeaManagement service uses the standard RTI/Grantlee codegen pipeline:
 1. `CODEGEN_IDL_SVC` — generates `nme_enums.idl` and `nme.idl` from `nme_service.xml`
 2. `RTIDDSGEN` — compiles `.idl` files into `.hpp`, `.cpp`, `.cxx`, `.Plugin` outputs
 3. `CODEGEN_TOPIC_TYPEDEFS` — generates `nme_dt[s,c]_types.h` / `nme_ft[s,c]_types.h`
 4. `CODEGEN_CLIENT_TOPICS_IFC` — generates `nme_[d|f]tc.h`
 5. `CODEGEN_CLIENT_TOPICS_IMPL` — generates `nme_[d|f]tc_impl.[cpp|h]`
 6. `CODEGEN_SERVER_TOPICS` — generates `nme_[d|f]ts.h`, `nme_[d|f]ts_impl.[cpp|h]`
 7. `CODEGEN_DATABASE` — generates `nme_db_impl.cpp/.h`, `nme_db.h`
 8. `CODEGEN_SQL` — generates `nme.sql`, `nme.xml`
 9. `CREATE_TOPIC_TYPE_PLUGIN` — generates topic type plugin files
 If generated files are required:
 - generate into the build tree
 - consume from the build tree
 - list complete OUTPUT and BYPRODUCTS
 - set correct DEPENDS and MAIN_DEPENDENCY where useful
 - use deterministic WORKING_DIRECTORY
 - use VERBATIM
 - wire generated sources with target_sources
 - wire generated include dirs with target_include_directories
 - ensure compilation depends on generation
 - ensure incremental rebuilds trigger on input/template changes
 Never commit generated `.idl`, `.h`, `.hpp`, or `.cpp` outputs. Never consume generated outputs from the source tree. Never fabricate generated outputs.
 ## Known pitfalls from the FileManagement/FilterManagement run
 Apply these rules before debugging from scratch; skipping them repeats known problems.
 ### rtiddsgen 7.7 generated API shape
 RTI Connext 7.7 rtiddsgen with `-language C++11 -stl` generates:
 - plain public data members with no getters or setters: use `data.id` and `data.id = value`, not `data.id()` or `data.id(value)`
 - no `*_def::type` wrapper types: use enums directly in the service namespace
 - renamed enums when the generated name collides with a framework type
 - `omg::types::optional` and `omg::types::sequence` members
 When a compile error looks like old getter/setter syntax ("expression cannot be used as a function") or a missing `*_def` type, read the generated header in the build tree for the real member and type names. Check every call site in the service, its handlers, and its WebSocket interfaces.
 ### Grantlee templates generate the service impl files
 Service `*_impl.[ch]` files are generated from `Lts/Common/CodeGen/*.grantlee` templates. If the fix belongs in generated code, fix the template; codegen reruns automatically. Never hand-edit generated outputs.
 ### NGL_ADD_LIBRARY2 does not define the compile guard
 NGL_ADD_LIBRARY defines `MAKE_<SYMBOL>_LIB` for the target; NGL_ADD_LIBRARY2 does not. A target consuming generated `*_impl.h` headers that carry an include guard fails with `#error "You are not allowed to include this file in your code!"` unless the guard is defined explicitly:
 ```cmake
 TARGET_COMPILE_DEFINITIONS(<target> PRIVATE MAKE_<SYMBOL>_LIB)
 ```
 ### Stub copies racing the codegen
 An unconditional `CONFIGURE_FILE(... COPYONLY)` that copies a stub header to a build-dir path that codegen also writes overwrites the generated file on every cmake re-configure. Guard such copies with `IF(NOT BUILD_RTI)` or `IF(NOT BUILD_GRANTLEE)`.
 ### Qt6 discovery in the container takes the minimal path
 `find_package(Qt6 ... COMPONENTS ...)` always fails in the validation container. The tree takes the "Found Qt6 (minimal)" path and every Qt6 component target is a manual IMPORTED target in the root CMakeLists. When a migrated service needs a Qt6 module the container does not discover (for example WebSockets):
 - add the matching `qt6-<module>-dev` package to docker_build.sh
 - create a manual IMPORTED target in the root CMakeLists following the existing pattern
 - define the availability macro via `add_compile_definitions` when the real module is present
 - link the target by name in the service CMakeLists
 - gate the compile macro and the link on the same condition
 Flipping a compile macro on an existing build dir leaves stale AUTOMOC caches. A clean build dir is required after flipping such macros.
 ### Include shadowing between the stub tree and real generated headers
 An include like `<Core/core_dtc.h>` can resolve into the migration stub tree (wrong namespaces) instead of the real generated header in the build tree. Use the full path from the build-tree include root (`<DDS/Core/core_dtc.h>`), add `include_directories(BEFORE ${CMAKE_SOURCE_DIR}/Lts)` when stub trees shadow Lts headers, and verify forward declarations name the same namespace as the real header.
 ### Compare with the Qt5 original before inventing fixes
 Several "missing field" or "unknown template" errors in the first run came from includes or members the Qt5 original had and the Qt6 copy had silently dropped. When a class fails to compile over a missing member or unknown base, diff against the Qt5 original first; restore the dropped piece rather than designing around it.
 ### Export-header macro names
 Generated export headers uppercase the whole target name, merging adjacent word letters: target `LtsSessionData` defines `LTSSESSIONDATA_EXPORT`. When writing tests that assert export macros, derive the expected prefix from the generated header, not from visual expectation.
 ### Build orchestration
 - docker_build.sh must keep `set -eo pipefail` in the container script
 - When a migrated service adds a test executable, add it to the fixed make target list in docker_build.sh so ctest actually runs it
 - build4 is root-owned and wiped by every docker_build.sh run
 ## Tests
 For every C++ code change, add three meaningful CTest tests where feasible.
 Rules:
 - tests must validate changed behavior, not only compilation
 - tests must be registered with CTest
 - tests must run with `BUILD_RTI=ON` and `BUILD_GRANTLEE=ON`
 - do not add OFF-variant tests
 - use deterministic tests without host-local paths
 Preferred location:
 - `./qt-migration-legatus/qt6-after/qt6-migrated-legatus/tests`
 Use policy-compatible names, for example:
 - `test_<name>.cpp`
 - `<name>_test.cpp`
 - `<name>test.cpp`
 - `<name>gtest.cpp`
 ## Docker and CI
 Authoritative migration Dockerfile:
 - `./app/Dockerfile`
 Authoritative validation script:
 - `./qt-migration-legatus/qt6-after/qt6-migrated-legatus/docker_build.sh`
 Do not use other Dockerfiles as task authority.
 Validation container expectations:
 - repository root at `/repo`, or the script's documented mount path
 - external dependencies under `/repo/external`, or the script's documented equivalent
 - RTI 7.7 at `/repo/external/rti_connext_dds-7.7.0`, or documented equivalent
 - `./rti_license.dat` mounted read-only if RTI requires it
 - no developer-local paths
 Jenkins CI must be able to discover and run the new tests, or verify that docker_build.sh runs them. Inspect and minimally update only if needed:
 - `./qt-migration-legatus/ci/Dockerfile.*`
 - `./qt-migration-legatus/ci/check_pr_policies.py`
 ## Required procedure
 1. Inspect repository state, branch, working tree, and forward-declaration directories.
 2. Compare Qt5 source with Qt6 target for NmeaManagement. Classify files as already migrated, missing, stale, generated, or needing adaptation.
 3. Identify dependencies: `svcCoreClient`, `ProjectConfig`, `LtsCommandLineParser`, `nglcoreapplication`, Qt6 modules, and any service-level interdependencies.
 4. Uncomment `ADD_SUBDIRECTORY(NmeaManagement)` in parent `Lts/Services/CMakeLists.txt`.
 5. Apply the smallest valid migration changes to fix compile/link errors.
 6. Add required CTest tests for C++ changes (if applicable).
 7. Review RTI/codegen paths for `nme_service.xml`.
 8. Check regressions: Qt5 links, removed modules, LogViewer, IDL warnings.
 9. Validate in Docker with `BUILD_RTI=ON` and `BUILD_GRANTLEE=ON`.
 10. Run CTest in the validated build directory.
 11. Check Jenkins/policy compatibility.
 12. Report factual status.
 Do not overwrite uncommitted user changes. If they block safe work, report the blocker.
 ## Required validation
 From:
 - `./qt-migration-legatus/qt6-after/qt6-migrated-legatus`
 Run:
 ```bash
 BUILD_RTI=ON BUILD_GRANTLEE=ON ./docker_build.sh
 ```
 CTest must run as part of validation.
 Expected CTest baseline: ctest exits with code 8 when tests are "Not Run". A pre-existing set of Not Run tests (for example nglcomp_test, aes/avm/exm/scm/bld suites, GrantleeParserSmoke) belongs to sibling targets outside the docker_build.sh make list; that set existed before this migration series and is not a failure. Treat only `***Failed` entries as failures. Do not widen this exception to skip or filter real failures, and do not add the missing sibling targets to fix the exit code. If a previously passing test becomes Not Run or Failed, that is a regression of this run.
 If a direct clean build is useful, use:
 ```bash
 cmake -S /repo/qt-migration-legatus/qt6-after/qt6-migrated-legatus -B /repo/build-rti-on-grantlee-on -G Ninja -DCMAKE_BUILD_TYPE=Debug -DBUILD_RTI=ON -DBUILD_GRANTLEE=ON
 cmake --build /repo/build-rti-on-grantlee-on --parallel
 ctest --test-dir /repo/build-rti-on-grantlee-on --output-on-failure
 ```
 Also check whether this file exists and run it only if present:
 ```bash
 ./docker-build.h
 ```
 If it is absent or a typo, report that. Do not invent a replacement.
 Do not run or validate OFF variants.
 ## Success criteria
 Success requires:
 - NmeaManagement migrated and confirmed buildable
 - NmeaManagement included in the Qt6 build (uncommented in parent CMakeLists.txt)
 - configure, build, and CTest pass with `BUILD_RTI=ON` and `BUILD_GRANTLEE=ON`
 - docker_build.sh runs the relevant tests and fails on test failure
 - Jenkins/policy discovery accepts any new tests and validation changes
 - no active Qt5 imported target links remain for this service
 - generated outputs are build-tree only and freshly produced when required
 - no generated outputs are committed or consumed from the source tree
 - no fake generated files, dummy files, mocks, placeholders, or stubbed generated outputs exist
 - required stubs/forward declarations are only in allowed directories
 - removed modules remain removed
 - LogViewer remains preserved
 - RTI/codegen and Grantlee/KTextTemplate success is real, not stale or faked
 ## If blocked
 Do not fake success. Report:
 - failing command
 - key error output
 - affected service
 - category: project, path, merge, CMake, Qt API, codegen, Docker, RTI/license, Grantlee/KTextTemplate, test, CTest, Jenkins CI, stub relocation, or environment
 - what was fixed safely
 - what remains blocked
 - whether stale artifacts were ruled out
 - whether generated files were involved
 - exact missing files, targets, or generator step
 - whether tests and CTest integration succeeded
 - whether Docker validation and Jenkins discovery succeeded
 ## Final report
 Keep it short. Include:
 - status: validated, partially validated, or blocked
 - service migrated or already correct
 - files changed
 - C++ files changed
 - tests added per C++ change
 - CTest registration changes
 - CMake and generator changes
 - stub/forward-declaration moves or removals
 - Docker and Jenkins CI changes
 - Qt5 references removed or remaining
 - confirmation that removed modules were not restored
 - confirmation that LogViewer was preserved
 - exact validation commands and results
 - result of ./docker-build.h if present
 - remaining blockers or risks
@@ -0,0 +1,163 @@
 flmTests
 flmTopicTypePlugin
 svcAesClient
 svcAesCommon
 svcAesServer
 svcAlmClient
 svcAlmCommon
 svcAlmServer
 svcAreaEffectSimulation
 svcAsmClient
 svcAsmCommon
 svcAsmServer
 svcAssetManagement
 svcAudioVideoManagement
 svcAvmClient
 svcAvmCommon
 svcAvmServer
 svcBldClient
 svcBldCommon
 svcBldServer
 svcBuildings
 svcCentralEffectSimulation
 svcCesClient
 svcCesCommon
 svcCesDDSCommon
 svcCesGeoPairingImpl
 svcCesServer
 svcCmoClient
 svcCmoCommon
 svcCmoServer
 svcCnrHelper
 svcCodClient
 svcCodCommon
 svcCodServer
 svcCombatNetRadio
 svcComponentMonitor
 svcCoreClient
 svcDifferentialGPS
 svcEemClient
 svcEemCommon
 svcEemServer
 svcEffectShowClient
 svcEscClient
 svcEscCommon
 svcEscServer
 svcEsmClient
 svcEsmCommon
 svcEsmServer
 svcEvlClient
 svcEvlCommon
 svcEvlServer
 svcExerciseEventManagement
 svcExerciseManagement
 svcExmClient
 svcExmCommon
 svcExmServer
 svcFileManagement
 svcFilterManagement
 svcFlmClient
 svcFlmCommon
 svcFlmServer
 svcFltClient
 svcFltCommon
 svcFltServer
 svcGimClient
 svcGimCommon
 svcGimServer
 svcGmpServer
 svcGnaClient
 svcGnaCommon
 svcGnaServer
 svcGuezIedManagement
 svcInfrastructureManagement
 svcIsmClient
 svcIsmCommon
 svcIsmServer
 svcMapDummy
 svcMdmClient
 svcMdmCommon
 svcMdmServer
 svcMessaging
 svcMeteoDataManagement
 svcMrkClient
 svcMrkCommon
 svcMrkServer
 svcMsgClient
 svcMsgCommon
 svcMsgServer
 svcNomClient
 svcNomCommon
 svcNomServer
 svcNotificationManagement
 svcObdClient
 svcObdCommon
 svcObdServer
 svcOcBaseDownload
 svcOcSituationClient
 svcOcSituationServer
 svcOperatorManagement
 svcOpmClient
 svcOpmCommon
 svcOpmServer
 svcOreDummy
 svcOscClient
 svcOscCommon
 svcOscServer
 svcOssClient
 svcOssCommon
 svcOssServer
 svcParticipantManagement
 svcPdmClient
 svcPdmCommon
 svcPdmServer
 svcPedDummy
 svcPpmClient
 svcPpmCommon
 svcPpmServer
 svcPreClient
 svcPreCommon
 svcPreServer
 svcProjectDataManagement
 svcPwsCommon
 svcRecCommon
 svcRecordingManagement
 svcRepClient
 svcRepCommon
 svcRepCommonExecutable
 svcRepServer
 svcReportAnalyzer
 svcReportGenerator
 svcScmClient
 svcScmCommon
 svcScmServer
 svcScrDummy
 svcServiceManagement
 svcSituationReplay
 svcSmoDummy
 svcSomClient
 svcSomCommon
 svcSomServer
 svcSoundManagement
 svcSrmCommon
 svcSrpClient
 svcSrpCommon
 svcSrpServer
 svcTabClient
 svcTabCommon
 svcTabServer
 svcTabocClient
 svcTabocCommon
 svcTabocServer
 svcTargetManagement
 svcTgtClient
 svcTgtCommon
 svcTgtServer
 svcTrainingAreaBase
 svcTrainingAreaBaseOC
 svcVideoOverlayManagement
 svcWarehouseGuez
 svcWarehouseManagement
 svcWhgClient
 svcWhgCommon
 svcWhgServer
Author	SHA1	Message	Date
torsten	882a9d57e9	b18844a20 (HEAD -> feature/migrate-lts-projects-and-application)	2026-09-25 11:43:24 +00:00
torsten	001f95695c	Adds submod HEAD: Fix: Add BUILD_GROUP7-11 default initializations	2026-09-25 08:47:28 +00:00
torsten	a47d5f3aa4	Merge branch 'main' of devel:lifemaps/qt6-migration-pipeline into feature/migrate-lts-projects-and-application	2026-09-25 08:45:37 +00:00
torsten	ea90652fd4	Adds migration for lts/projects and lts/application (tbc) Entire-Checkpoint: 01M3BV674BDGYRJJJCMHP5ZBCF	2026-09-25 08:33:54 +00:00
torstenandCopilot	5f59c0e5df	Update qt6-migrated-legatus submodule with GROUP10/11 build groups Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> Entire-Checkpoint: 01M3BS0RSZTDARGS72H96NEY8K	2026-09-25 07:55:59 +00:00
torsten	b12eae9b6a	Add Group 9 (R,S,T,V,W) LTS Tools migration support	2026-09-24 16:47:13 +00:00
torsten	c8efdeb092	Group 8 migration: Add build script support and CTest infrastructure	2026-09-24 16:37:16 +00:00
torsten	4c30e54972	Qt6 migration: Group 7 tools (A,B,C,E,I directories)	2026-09-24 16:28:43 +00:00
torstenandCopilot	337e7533e3	Update qt-migration-legatus submodule to Group 6 migration commit - Includes --group6 build support - Adds CTest tests for 11 LTS Tools - Fixes Qt6 migration bugs in DBAdministration and DBUpdate - 3 tools (DBAdministration, DBOperatorSettingsRemover, DBUpdate) build successfully - 8 tools blocked by pre-existing Group 3 (ExerciseManagement) errors Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> Entire-Checkpoint: 01M37DQ5D9Q6860KK1AT0FWNE0	2026-09-23 15:21:32 +00:00
torsten	3e6a83285f	Adds new HEAD in this developing branch feature/migrate-lts-tools-d-and-l	2026-09-23 13:20:33 +00:00
berrux-dev	11ccc9efcc	Merge prompt Qt6 Migration CI / migrate (push) Has been cancelled Details	2026-09-23 13:02:36 +02:00
berrux-dev	b3e86c364c	Service migration documentation Qt6 Migration CI / migrate (push) Waiting to run Details	2026-09-23 12:16:59 +02:00